The dataset of canopy structure and biophysical parameter measurements was obtained in the Linze grassland foci experimental area. Detailed information was as follows: {| !Observation item !observation time !plot |- | The leaf angle || 2008-06-24 || E |- | The leaf angle || 2008-06-29 || A E |- | Vegetation biomass || 2008-06-18 || A D E |- | Vegetation biomass || 2008-06-24 || A E |- | Vegetation biomass || 2008-06-29 || A E |- | Plant height || 2008-05-26 || A D E |- | Plant height || 2008-06-14 || B |- | LAI || 2008-05-28 || E |- | LAI || 2008-06-05 || E |- | LAI || 2008-06-06 || A |- | LAI || 2008-06-11 || A |- | LAI || 2008-06-18 || D E |- | Coverage || 2008-5-27 || subplots (30m) in A, D and E |- | Coverage || 2008-5-26、27 || plots (360m) in D and E |- | Coverage || 2008-6-14 || plots (360m) in B |- |} Data were archived in Excel and txt file. See WATER: Dataset of setting of the sampling plots and stripes in the foci experimental area of Linze station for more information.
CAO Yongpan, CHAO Zhenhua, GE Chunmei, HU Xiaoli, HUANG Chunlin, NIAN Yanyun, WANG Shuguo, WANG Xufeng, WU Yueru, WANG Jing, LI Xiaoyu
The dataset of ground truth measurement synchronizing with MODIS was obtained in the Linze grassland foci experimental area on Jun. 2, 2008. Measurements were carried out twice at intervals of 125m in four quadrates (2km×2km), which were H01-H08, H09-H16, H17-H24 and H25-H32 respectively. Simultaneous ground data were mainly the canopy temperature, the half-height temperature, the land surface radiative temperature and the soil temperature (0-5cm) by the probe thermometer. For soil moisture, the soil temperature, soil moisture, the loss tangent, soil conductivity, and the real part and the imaginary part of soil complex permittivity were acquired by the POGO soil sensor, and soil gravimetric moisture, volumetric moisture, and soil bulk density after drying by the cutting ring inNo.1 quadrats (H01-H08), No.2 (H09-H16) and No.3 (H17-H24); and in No.4 quadrat 4 (H25-H32), soil moisture, soil conductivity, the soil temperature, the real part of soil complex permittivity were acquired by WET, soil gravimetric moisture, volumetric moisture, and soil bulk density after drying by the cutting ring. Complementary measurements were carried out on Jun. 3, 2008. The soil temperature, soil moisture, the loss tangent, soil conductivity, the real part and the imaginary part of soil complex permittivity were acquired by the POGO soil sensor, and soil gravimetric moisture, volumetric moisture, and soil bulk density after drying by the cutting ring in H41-H48, H49-H56 and H57-H64; and in H33-H40, soil moisture, soil conductivity, the soil temperature, and the real part of soil complex permittivity were acquired by WET, soil gravimetric moisture, volumetric moisture, and soil bulk density after drying by the cutting ring. Data were archived in Excel format. See WATER: Dataset of setting of the sampling plots and stripes in the Linze station foci experimental area for more information.
CHAO Zhenhua, NIAN Yanyun, WANG Xufeng, LIANG Wenguang
The dataset of ground truth measurements synchronizing with the airborne WiDAS mission was obtained in No. 1, 2 and 3 quadrates of the A'rou foci experimental area on Jul. 7, 2008. The quadrates were divided into 4×4 subsites, with each one spanning a 30×30 m2 plot. Observation items included: (1) spectrum of stellera, whin and pasture by ASD FieldSpec (350~2 500 nm) from BNU, with 20% reference board. Raw data were binary files direct from ASD (by ViewSpecPro), which were recorded daily in detail, and pre-processed data on reflectance were in .txt format. (2) photosynthesis of stellera , whin and pasture by LI-6400. The data were archived in Excel format. (3) surface temperature by the handheld infrared thermometer. 25 corner points of each subsite were chosen and acquisition time, the soil temperature measured three times and the land cover types were archived. Six files were included, the stellera spectrum of diverse coverage, spectrum data for 60% and 65% coverage, stellera photos, photosynthesis, the infrared temperature synchronizing with the airplane, and WiDAS images (resolution: 1.25m, 7.5m and 10m).
GE Yingchun, LI Hongyi, Qian Jinbo, WANG Yang, YU Yingjie
The dataset of forest canopy gap fraction above the rain gauges observed by the camera (PENTAX K100D, 2400×1600) was obtained at the super site (100m×100m, Qinghai spruce) around the Dayekou Guantan forest station from 9:00-10:40 on Jun. 4, 2008. Observation items included the ground-based LiDAR scanning, the total station measuring, DGPS, tally investigation, LAI, canopy spectrum, camera observations of the canopy, soil evapotranspiration, the soil frozen tube observations, surface roughness, precipitation interception, soil moisture and dry-wet weight of the forest component. A subplot (25m×25m) was chosen for precipitation interception observations with different canopy density, and 32 sets of photos were taken 1m above the ground. Through studying those photos, the number and location of rain gauges could be determined; and then the canopy density could also be further developed.
BAI Yunjie, CHE Tao, LI Jiancheng, TAN Junlei, Qu Yonghua, ZHOU Hongmin
The dataset of spectral reflectance observations of the Picea crassifolia was obtained at the super site around the Dayekou Guantan forest station. Six measurements were carried out altogether, including three outdoors and three indoors. (1) Outdoor multiangle (-60°, -50°, -40°, -30°, -20°, -0°, 10°, 20°, 30°, 40°, 50° and 60°) and four-component (the sunshine and the shaded canopy, the sunshine and the shaded land) spectrum of Qinghai spruce was measured by ASD, FieldSpec Pro and the observation platform (of BNU make) on Jun. 10 and 11, 2008. Optical fibres of 1m and 10m were used as required. Data were archived as Excel files. (2) Indoor observations by the integrating sphere, Li-Cor 1800-12s (BNU), ASD and FieldSpec Pro were carried out on Jun. 5, 0 and 10, 2008. They were mainly for trees of different ages, reflectance of Qinghai spruce bark, and reflectance and transmission. The data can only be opened by ASD ViewSpecPro; the processed spreadsheet file can be opened by Microsoft Excel. (3) Vertical ground object (scrub, meadow, moss, the shaded moss, litter, the bare land, Qinghai spruce of different ages) spectrum was measured by ASD and FieldSpec Pro on Jun. 4, 2008. Optical fibres of 1m and 10m were used as required.
SONG Jinling, FU Zhuo, GUO Xinping, WANG Xinyun, WANG Qiang, WANG Bengyu
The dataset of ground truth measurement synchronizing with PROBA CHRIS was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jul. 1, 2008. Observation items included: (1) FPAR (Fraction of Photosynthetically Active Radiation) of maize and wheat by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR-surface transmissionPAR-canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in the table format of Word. (2) BRDF of maize by ASD (350~2 500 nm) from Institute of Remote Sensing Applications (CAS) and the self-made multi-angluar observation platform of BNU make in Yingke oasis maize field. The maximum height of the platform was 5m above the ground with the azimuth 0~360° and the zenith angle -60°~60°. An automatic thermometer was attached to the platform for the multiangle radiative temperature. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel. (3) The radiative temperature of the maize canopy by the automatic thermometer (emissivity: 0.95),at a hight of 50cm from the crown in Yingke oasis maize field. Raw data, blackbody calibrated data and processed data were all archived in Excel format. (4) Atmospheric parameters at the resort by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for details. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (5) The multiangle radiative temperature by the automatic thermometer (emissivity: 1.0) attached on the observation platform, at an interval of 0.05s. The data were archived in .txt files (.dat format). The first seven lines were the header file, including acquisition date, time, and intervals; besides, Time (starting time), TObj (target temperature), Tint (the interior temperature of the probe), TBox (the temperature of the box) and Tact (the actual temperature calculated from the given emissivity) were also listed.
CHEN Ling, REN Huazhong, XIAO Yueting, SU Gaoli, WU Mingquan, WU Chaoyang, XIA Chuanfu, ZHOU Chunyan, ZHOU Mengwei, SHEN Xinyi, YANG Guijun
The dataset of evaportranspiration measured by micro-lysimeter was obtained at the super site (100m×100m, pure Qinghai spruce) around the Dayekou Guantan forest station. Observation items included the ground-based lidar scanning, the total station measuring, DGPS, tally investigation, LAI, canopy spectrum, camera observations of the canopy, soil evapotranspiration, the soil frozen tube observations, surface roughness, precipitation interception, soil moisture and dry-wet weight of the forest component. Observation time was 18:00 every day from Jun. 1 to Dec. 31, 2008. 20 rain gauges, 4 self-made Lysimeter (diameter: 20cm) and the electronic balance were used. Those provide reliable data for retrieval of evapotranspiration from remote sensing data.
BAI Yunjie, CHE Tao, LI Jiancheng, TAN Junlei
The dataset of ground truth measurement synchronizing with the airborne microwave radiometers (L&K bands) mission was obtained in the Linze station foci experimental area on May 25, 2008. Observation items included: (1) soil moisture (0-5cm) measured once by the cutting ring method in the corner points of the 40 subplots of the west-east desert transit zone strip , three times in the corner points of the nine subplots of the north-south desert transit zone, once by the cutting ring and once by ML2X Soil Moisture Tachometer in the center points of nine subplots of the farmland quadrates. The preprocessed soil volumetric moisture data were archived as Excel files. (2) the surface radiative temperature by three handheld infrared thermometer (5# and 6# from Cold and Arid Regions Environmental and Engineering Research Institute, and one from Institute of Geographic Sciences and Natural Resources, which were all calibrated) in the west-east and north-south desert transit zone strip (various times synchronizing with the airplane), and Wulidun farmland quadrates (repeated twice at intervals of 15m from east to west). There are 34 sample points in total and each was repeated three times synchronizing with the airplane. Photos were taken. Data were archived as Excel files. (3) maize BRDF once by ASD Spectroradiometer (350~2 500 nm) from BNU, the reference board (40% before Jun. 15 and 20% hereafter), two observation platforms of BNU make and one of Institute of Remote Sensing Applications make in Wulidun farmland. Raw spectral data were archived as binary files, which were recorded daily in detail, and pre-processed data on reflectance were archived as text files (.txt). See the metadata record “WATER: Dataset of setting of the sampling plots and stripes in the Linze station foci experimental area” for more information of the quadrate locations.
DING Songchuang, GAO Song, PAN Xiaoduo, Qian Jinbo, WANG Yang, ZHU Shijie, LI Jing, XIAO Zhiqiang
The dataset of diurnal change of FPAR observations was obtained by the quantum meter in the Linze grassland foci experimental area. Incident and reflected radiation of canopy, and land surface in reed, saline grass, alfalfa, cumin and barley were measured and diurnal changes of PAR and Fpar were also acquired. Observations were carried out: In plot E (barley) and cumin field on Jun. 6, 2008; plot D (alfalfa) and plot E on Jun. 11; plot D and E on Jun. 15; plot E on Jun. 16; plot A (reed) on Jun. 20; plot B (saline) on Jun. 22; plot D and E on Jun. 23; plot B (saline) on Jun. 24; plot A and plot E on Jun. 29. 14 Excel files, one Word and one .TXT were archived. See Water: The dataset of setting of the sampling plots and stripes in the Linze grassland foci experimental area for more information.
CAO Yongpan, CHAO Zhenhua, GE Chunmei, HU Xiaoli, HUANG Chunlin, LIANG Ji, NIAN Yanyun, WANG Shuguo, WANG Xufeng, WU Yueru, LI Xiaoyu
The dataset of ground truth measurement synchronizing with the airborne imaging spectrometer (OMIS-II) mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jun. 4, 2008. Observation items included: (1) ground object reflectance spectra of maize and wheat in Yingke oasis maize field by ASD FieldSpec (350~2500 nm, the vertical canopy observation and the transect observation) from Institute of Remote Sensing Applications (CAS); and of the black and white cloth, the water body, vegetation and the cement floor in the resort calibration site by ASD (350-2500nm, fixed points observation) from BNU. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (2) The radiative temperature in Yingke oasis maize field (the transect observation), Yingke oasis wheat field (the transect observation), the maize field (intensive) near the resort (the transect observation) and Huazhaizi desert No. 1 plot (the diagonal and the fixed point observation) by the handheld infrared thermometer (emissivity: 1.00). As for the fixed point observation, 25 corner points were chosen in the plot of 30m×30m, and at each point, the bare land was measured twice and the vegetation once. Raw data (in Word format), blackbody calibrated data and processed data (in Excel format) were all archived. (3) Atmospheric parameters on the ICBC resort office roof by CE318 (produced by CIMEL in France) from Institute of Remote Sensing Applications. The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1640nm, 1020nm, 936nm, 870nm, 670nm, 550nm, 440nm, 380nm and 340nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (4) Photosynthesis of wheat and maize by LI6400 in Yingke oasis maize field, carried out according to WATER specifications. Raw data were archived in the user-defined format (by notepat.exe) and processed data were in Excel format. (5) the radiative temperature vegetation (Reaumuria soongorica) and the bare land in Huazhaizi desert No. 1 plot by ThermaCAM SC2000 ( (1.2m above the ground, FOV = 24°×18°),. The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived in Excel format). (6) the radiative temperature by the automatic thermometer at nadir in Yingke oasis maize field (2 from BNU, FOV: 10°; emissivity: 0.95, at intervals of 1s, set above the maize canopy and the bare land between ridges and the third from Institute of Remote Sensing Applications, emissivity: 1.0, at intervals of 0.05s, set above the maize canopy), Yingke wheat field (one set above the wheat canopy), Huazhaizi desert No. 1 plot (one set above the barley canopy), and in the resort calibration site (one for the cement floor). Raw data, blackbody calibrated data and processed data were all archived in Excel format. (7) Wheat albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (8) Wheat FPAR (Fraction of Photosynthetically Active Radiation) by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR-surface transmissionPAR-canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in the table format of Word. (9) LAI in Yingke oasis maize field. The maximum leaf length and width of each maize and wheat were measured. Data were from Jun. 6, 2008, archived in Excel format.
CHEN Ling, REN Huazhong, ZHOU Hongmin, CAO Yongpan, SHU Lele, WU Yueru, XU Zhen, LI Li, LIU Sihan, XIA Chuanfu, XIN Xiaozhou, ZHOU Chunyan, ZHOU Mengwei, FAN Wenjie, TAO Xin, FENG Lei, LIANG Wenguang, YU Fan, WANG Dacheng, YANG Guijun, LI Xiaoyu, Liu Liangyun
The dataset of diurnal FPAR change observations was obtained by the quantum light meter (3415 series) in the Linze station foci experimental area. Each observation lasted from 9am to 5pm at intervals of 10 minutes, in the maize field and the sunflower field on Jun. 16, and in Wulidun farmland quadrates on Jul. 1, 2008. Located 15cm above the canopy, the quantum light meter was used to measure PARci and PARcr (at 0°, 30°, 45°, 60° and 90°); located 15cm above the ground, for PARgi and PARgr. And then PAR= (PARci- PARcr)- ( PARgi- PARgr); Fpar =PAR/ PARci. Data were archived as Excel files.
SONG Yi, BAI Yanfen, HAO Xiaohua, PAN Xiaoduo, SHU Lele, SONG Yi, WANG Yang, XU Zhen, ZHU Shijie
The dataset of chlorophyll content observations was obtained in the Yingke oasis and Linze grassland foci experimental areas. Observation items included: (1) Chlorophyll content synchronizing with TM in Yingke oasis No. 1, 4 and 5 maize plots on May 20, 2008. (2) Chlorophyll content synchronizing with ASTER and MODIS in Linze grassland foci experimental areas on May 24, 2008. (3) Chlorophyll content synchronizing with ASTER and MODIS in Yingke oasis maize field on May 28, 2008. (4) Chlorophyll content synchronizing with WiDAS (Wide-angle Infrared Dual-mode line/area Array Scanner) in Yingke oasis maize field on May 30, 2008. (5) Chlorophyll content synchronizing with OMIS-II in Yingke oasis maize field on Jun. 16, 2008. (6) Chlorophyll content synchronizing with WiDAS (Wide-angle Infrared Dual-mode line/area Array Scanner) in Yingke oasis maize field on Jun. 29, 2008. (7) Chlorophyll content synchronizing with WiDAS (Wide-angle Infrared Dual-mode line/area Array Scanner) and TM in Yingke oasis maize field on Jul. 7, 2008. (8) Chlorophyll content synchronizing with WiDAS (Wide-angle Infrared Dual-mode line/area Array Scanner) in Yingke oasis maize field on Jul. 11, 2008.
LI Li, XIN Xiaozhou, ZHANG Yang, ZHOU Mengwei
The dataset of photosynthesis observed by Li-6400 was obtained in the Yingke oasis, Huazhaizi desert steppe and Linze grassland foci experimental areas. Parameters included: CO2R_µml: CO2 viscosity inside the reference lab (µmol CO2 mol-1); CO2S_µml: CO2 viscosity inside the sample room (µmol CO2 mol-1); H2OR_mml: H2O viscosity inside the reference lab (mmol H2O mol-1); H2OS_mml: H2O viscosity inside the sample room (mmol H2O mol-1); Flow_CV%: variation coefficient of Flow_µml (%); RH_R_%: relative humidity inside the reference lab (%); RH_S_%: relative humidity inside the sample room (%); Td_R_%: dew-point temperature inside the reference lab (C); Td_S_%: dew-point temperature inside the sample room (C); Prss_kPa: air pressure (kPa); ParIn_µm: active radiation of interior photosynthesis (µmol m-2 s-1); c: active radiation of interior photosynthesis (µmol m-2 s-1); BLC_moll: boundary layer conductance (mol m-2 s-1); Tblock°C: temperature inside the sample room (°C) (mmol H2O mol-1); Tleaf°C: leaf temperature (°C); HH:MM:SS: time; Program: automatic program mode; CHPWMF:Status word (summary of line J); Battery: battery voltage (V); CO2: CO2 IRGAs; H2O: IRGAs; Pump: pump; Flow: air flow controller; Mixr: CO2 mixer; Fan: fan; Program: automatic program mode; ProgPrgs: AutoProgram step counter; FwMxCrLp: Numerical summary of the four stability flags; totalCV% : See totalCV% under E above; CRagc_mv: Reference CO2 AGC (automatic gain control) signal, in mV; CSagc_mv: Sample CO2 AGC signal; HRagc_mv: Reference H2O AGC signal; HSagc_mv: Sample H2O AGC signal. Observations were carried out as follows: (1) Photosynthesis synchronizing with TM in Yingke oasis No. 1 maize plot (three maize plants), No. 4 (5 maize plants) and No. 5 (2 wheat plants) on May 20, 2008. (2) Barley and alfalfa synchronizing with ASAR and MODIS on May 24, 2008. (3) Photosynthesis synchronizing with ASAR and MODIS in Yingke oasis maize plot on May 28, 2008. (4) Photosynthesis synchronizing with WiDAS in Yingke oasis maize plot on May 30, 2008. (5) Photosynthesis synchronizing with OMIS-II in Yingke oasis maize plot on Jun. 4, 2008. (6) Photosynthesis synchronizing with OMIS-II in Yingke oasis maize plot on Jun. 16, 2008. (7) Photosynthesis synchronizing with WiDAS in Yingke oasis maize plot on Jun. 29, 2008. (8) Photosynthesis synchronizing with WiDAS and TM in Yingke oasis maize plot on Jul. 7, 2008. (9) Photosynthesis synchronizing with WiDAS in Yingke oasis maize plot on Jul. 11, 2008. Data, including observation time, instrument parameters and those above mentioned, were archived in the original format of LI-6400, and could be read by .exe and Microsoft Excel.
LI Li, LIU Sihan, SU Gaoli, Wen Jianguang, XIA Chuanfu, XIN Xiaozhou, ZHANG Yang, ZHOU Chunyan, ZHOU Mengwei
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission and Envisat ASAR was obtained in the Linze station foci experimental area on Jul. 11, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire CCD, MIR and TIR band data. The data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:26 BJT. The simultaneous ground data included the following items: (1) soil moisture (0-5cm) measured once by the cutting ring method at the corner points of the 40 subplots of the west-east desert transit zone strip , once by the cutting ring method in the nine subplots of the north-south desert transit zone, nine times in the LY06 and LY07 strips quadrates,and once by the cutting ring and once by ML2X Soil Moisture Tachometer in the Wulidun farmland. The preprocessed soil volumetric moisture data were archived as Excel files. (2) the surface radiative temperature measured by three handheld infrared thermometer (5# and 6# from Cold and Arid Regions Environmental and Engineering Research Institute, and one from Institute of Geographic Sciences and Natural Resources, which were all calibrated) in LY06 and LY07 strips (49 points and repeated three times), and Wulidun farmland quadrates (various points and repeated three times). Data were archived as Excel files. (3) spectrum of maize, soil and soil with known moisture measured by ASD Spectroradiometer (350~2 500 nm) from BNU and the reference board (40% before Jun. 15 and 20% hereafter) in Wulidun farmland. Raw spectral data were binary files , which were recorded daily in detail, and pre-processed data on reflectance (by ViewSpecPro) were archived as Excel files. (4) maize BRDF measured by ASD Spectroradiometer (350~2 500 nm) from BNU, the reference board (40% before Jun. 15 and 20% hereafter), two observation platforms of BNU make and one of Institute of Remote Sensing Applications make in Wulidun farmland. Raw spectral data were archived as binary files, which were recorded daily in detail, and pre-processed data on reflectance and transmittivity were archived as text files (.txt). (5) LAI measured in the maize quadrate, poplar quadrate and desert scrub quadrate in Wulidun farmland, the desert transit zone strips and the poplar forest quadrate by the fisheye camera (CANON EOS40D with a lens of EF15/28), shooting straight downwards, with exceptions of higher plants, which were shot upwards. Data included original photos (.JPG) and those processed by can_eye5.0 (in excel). (6) LAI of maize measured by LAI2000 in Linze station quadrates and Wulidun farmland quadrates. Data educed from LAI2000 periodically were archived as text files (.txt) and marked with one ID. Raw data (table of word and txt) and processed data (Excel) were included. Besides, observation time, the observation method and the repetition were all archived. (7) LAI measured by the ruler and the set square in B2 and B3 of Linze station quadrates. Data were archived as Excel files. See the metadata record “WATER: Dataset of setting of the sampling plots and stripes in the Linze station foci experimental area” for more information of the quadrate locations.
YU Yingjie, DING Songchuang, SONG Yi, WANG Yang, YAN Qiaodi, ZHU Shijie, XIE Tingting, JIANG Hao, LI Shihua, LIU Jun
The dataset of LAI measurements was obtained in the Linze station foci experimental area. (1) LAI of maize, desert scrub and the poplar measured by the fisheye camera (CANON EOS40D with a lens of EF15/28), shooting straight downwards, with exceptions of higher plants, which were shot upwards in Wulidun farmland quadrates (Jun. 3, 4 and 29, May 28 and 30 and Jul. 11), inside Linze station quadrates (Jun. 19, 25 and 30, Jul. 3 and 10, May 27), the desert transit zone (May 28 and 30) and the poplar forest (May 30). Sample points were archived in coordiantes.xls. Data included original photos (.JPG) and those processed by can_eye5.0 (in excel). For more details, see Readme file. (2) LAI measured by the ruler and the set square in Wulidun farmland quadrate inside Linze station on May 22, 23, 24, 28 and 30 and Jul. 11, 2008. Part of the samples were also measured by LI-3100 and compared with those by manual work for further correction. Data were archived as Excel files. (3) LAI and SD of maize measured by LAI2000 in Wulidun farmland quadrates (Jun. 24 and 29 and Jul. 10) and inside Linze station quadrates (Jun. 19, 25 and 30, Jul. 3, 9 and 10). Data educed from LAI2000 periodically were archived as text files (.txt) and marked with one ID. Raw data (table of word and txt) and processed data (Excel) were included. Besides, observation time, the observation method and the repetition were all archived. See the metadata record “WATER: Dataset of setting of the sampling plots and stripes in the Linze station foci experimental area” for more information of the quadrate locations.
DONG Jian, LI Jing, Li Xiangyun, Qu Yonghua, SONG Danxia, SUN Qingsong, XIAO Yueting, XIAO Zhiqiang, YU Yingjie, ZHOU Hongmin, JIANG Hao, LI Shihua,
The dataset of BRDF observations was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas. Reflectance could be got based on R = (DN1/DN0)×R0, DN1 indicating DN of the item, R0 and DN0 the reflectance and DN of the grey board. Synchronizing with WiDAS and OMIS-II, the ground observations on reflectance (-60°~60° at intervals of 10°) of maize and wheat were carried out with ASD (FOV: 25°) and the self-made observation platform (maximum height: 5m) on May 30, Jun. 9, 14, 20, 22, 26 and 30, and Jul. 1, 2008. Raw data, recorded data and processed BRDF were archived in Excel format.
CHEN Ling, REN Huazhong, WANG Haoxing, YAN Guangkuo, ZHANG Wuming, XIN Xiaozhou, ZHANG Yang, FAN Wenjie, TAO Xin
The dataset of ground truth measurements synchronizing with the airborne WiDAS mission was obtained in the Linze station foci experimental area on May 30, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire CCD, MIR and TIR band data. The simultaneous ground data included: (1) soil moisture (0-5cm) measured nine times by the cutting ring method (50cm^3) along LY07 and LY08 quadrates, and once by the cutting ring method and once by ML2X Soil Moisture Tachometer in the six points of Wulidun farmland quadrates. The preprocessed soil volumetric moisture data were archived as Excel files. (2) surface radiative temperature measured by two handheld infrared thermometer (5# and 6# from Cold and Arid Regions Environmental and Engineering Research Institute which were both calibrated) in the LY07 and LY08 quadrates (98 sample points and repeated three times) and the Wulidun farmland quadrates (various points and repeated three times). Data were archived as Excel files. (3) spectrum of maize, soil and soil with known moisture measured by ASD Spectroradiometer (350~2 500 nm) from BNU,and the 40% reference board in Wulidun farmland quadrate and the desert transit zone strips. Raw spectral data were archived as binary files, which were recorded daily in detail, and pre-processed data on reflectance were archived as Excel files. (4) maize BRDF measured by ASD Spectroradiometer (350~2 500 nm) from BNU, the 40% reference board, two observation platforms of BNU make and one of Institute of Remote Sensing Applications make in Wulidun farmland quadrate and the desert transit zone strips. Raw spectral data were archived as binary files , which were recorded daily in detail, and pre-processed data on reflectance and transmittivity (read by ViewSpecPro) were archived as text files (.txt). (5) LAI of maize, poplar and the desert scrub measured by the fisheye camera (CANON EOS40D with a lens of EF15/28), shooting straight downwards, with exceptions of higher plants, which were shot upwards in Wulidun farmland quadrate I, the desert transit zone and the poplar forest. Data included original photos (.JPG) and those processed by can_eye5.0 (in excel). (6) LAI measured by the ruler and the set square in D and H quadrates of the Wulidun farmland. Part of the samples were also measured by LI-3100 and compared with those by manual work for further correction. Data were archived as Excel files. See the metadata record “WATER: Dataset of setting of the sampling plots and stripes in the Linze station foci experimental area” for more information of the quadrate locations.
LI Jing, Li Xiangyun, Qu Yonghua, SUN Qingsong, GAO Song, HAO Xiaohua, PAN Xiaoduo, Qian Jinbo, SONG Yi, WANG Yang, ZHU Shijie, GONG Hao, ZHU Man
The dataset of crop management survey was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Oct. 29, 30 and 31, 2008. Observation items included the observation date, the information of experimental area, the farming year, test breeds types, the sowing date, seeding quantity, planting density, the harvest date, the yield, the farming date, fertilizer, irrigation, desinsection, the key growth period, GPS, and the crop management. Data were archived in MS Office Word.
DING Songchuang, MA Mingguo
The dataset of evapotranspiration observed by the micro-lysimeter (d:25cm; h:24cm) was obtained in the Yingke oasis foci experimental area at 6:30am and 8:00pm from Jun. 14 to Jul. 13, 2008. The weather condition of the day was also recorded. Data were archived as Excel files. Observations on Jun. 25 and 26 discontinued.
GE Yingchun, MA Mingguo, SHU Lele, WANG Jianhua, XU Zhen, SU Gaoli, LIANG Wenguang, YU Fan, Wang Jing, LI Xiaoyu
The dataset of ground truth measurements synchronizing with Envisat ASAR was obtained in the Linze station foci experimental area from Sep. 12 to Sep. 15, 2007 during the pre-observation period. One scene of Envisat ASAR image was captured on Sep. 19. The data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:29 BJT. Observation items included: (1) GPS by GARMIN GPS 76 (2) LAI by LAI-2000 (3) photosynthesis measured by LI6400 from Linze station carried out according to WATER specifications. Raw data were archived in the user-defined format , which can be opened by notepat and processed by Excel. (4) object spectrum of typical ground objects measured by ASD FieldSpec Spectroradiometer (350~2 500 nm) from Gansu Meteorological Administration. The reference whiteboard was attached therein. Raw spectral data were archived as binary files, which were recorded daily in detail, and pre-processed data on reflectance were archived as text files (.txt). (5) infrared temperature measured by the handheld infrared thermometer from Cold and Arid Regions Environmental and Engineering Research Institute, which was calibrated. The infrared temperature of the crown, the vertical canopy, 45 degrees frontlight and backlight were measured respectively. The data were archived as Excel files. (6) soil profile (0-10cm, 10-20cm, 20-40cm and 40-60cm), and soil moisture measured by the cutting ring method. Profile photos were taken meanwhile. (7) quadrate (1m×1m) investigations, including the quadrate number, species, quantities, coverage, the total quadrate coverage, the mean height, biomass number, the total green weight and the total dry weight. (8) repeated measurements on chlorophyll content of different species measured by SPAD 502. (9) photos taken by Nikon D80 with a lens of Sigma 8mm F3.5 EX DG CIRCULAR FISHEYE, shooting straight downwards at the height of 1.5m (10) atmospheric parameters at Daman Water Management office measured by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 and can be opened by ASTPWin. ReadMetext files (.txt) is attached for detail. Processed data (after retrieval of the raw data) in Excel are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number.
BAI Yunjie, CHE Tao, DING Songchuang, GAO Song, HAN Xujun, HAO Xiaohua, LI Hongyi, LI Xin, LI Zhe, LIANG Ji, PAN Xiaoduo, QIN Chun, RAN Youhua, WANG Xufeng, WU Yueru, YAN Qiaodi, ZHANG Lingmei, FANG Li, LI Hua, Liu Qiang, Wen Jianguang, MA Hongwei, YAN Yeqing, YUAN Xiaolong
The dataset of survey at the poplar sampling plot was obtained in the Linze station foci experimental area. Observation items included: (1) soil profile moisture and temperature (0-5cm, 0-5cm, 10-20cm, 20-40cm and 40-60cm) with photos measured twice by the cutting ring method (50cm^3, each layer), once by ML2X Soil Moisture Tachometer and the probe thermometer (15cm, twice each layer) on Jun. 3, 2008. Data were archived as Excel files. (2) shallow layer soil moisture (0-5cm) measured once by the cutting ring method (50cm^3, once each point) and twice by ML2X Soil Moisture Tachometer on Jun. 4, 2008. 13 points were selected and data were archived as Excel files. (3) LAI by TRAC on Jul. 20, 2008. Data were archived as Excel files. (4) roughness measured by the roughness plate together with the digital camera. 18 points were selected and data were archived in JPG format format. (5) forest investigation of Populus gansuensis from Jun. 5-13, 2008: coordinates, the diameter at breast height and the crown size by the measuring tape, full height by TruPulse200. 408 trees were selected and data were archived as Excel files. See the metadata record “WATER: Dataset of setting of the sampling plots and stripes in the Linze station foci experimental area” for more information of the quadrate locations.
BAI Yanfen, DING Songchuang, HAO Xiaohua, PAN Xiaoduo, Qian Jinbo, SONG Yi, WANG Yang, WANG Zhixia, ZHU Shijie
The dataset of vegetation cover fraction observations was obtained by the self-made instrument and the camera at a height of 2.5m-3.5m above the ground in the Yingke oasis, Huazhaizi desert steppe and Biandukou foci experimental areas on May 20, 24, 25, 28 and 30, Jun. 11, 14, 15, 21, 23, 24, 27 and 30, and Jul. 2, 2008. Observations were carried out in Yingke oasis maize field, Yingke oasis wheat field, Huazhaizi desert No. 1 and 2 plots, the rape field, the barley field and grassland in Biandukou. A pole with known length was put in each photo to determine the size of the photo. GPS data was used for the location and the technology LAB was used to retieve the coverage of the green vegetation. Besides, surrounding environment was also recorded. The dataset included the primary collected vegetation images and retrieved fraction of vegetation coverage.
QIAN Yonggang, REN Huazhong, WANG Haoxing, WANG Jindi, WANG Tianxing, YAN Guangkuo, ZHANG Wuming
The dataset of the discrimination of C3/C4 species was obtained by the handheld GPS and the digital camera in the Linze station foci experimental area on Jul. 10, 2008. Data fields included Gps, Longitude, Latitude, Photo_num and Describe (descriptions on C3/C4 vegetation and photos).
CHENG Zhanhui, Liu Liangyun
The dataset of water content of forest canopy components (the twig and the leaf) measurements was obtained at the super site (100m×100m) around the Dayekou Guantan forest station on Jun. 5, 2008. The sample tree was selected according to different diameters at breast height. 5 diameter classes were divided and in each class, 10 trees were selected and altogether 30 trees were selected as sampling trees. Branches in different parts were picked by the tree pruner and the twig and the leaf were separated manually, whose green weight was measured by the scales on the scene and dry weight by oven drying in the lab. Those provide reliable data for the reconstruction of the 3D structure of the forest scene, and for modelling active and passive remote sensing mechanisms and the simulation of remote sensing images.
BAI Lina, TIAN Xin, WANG Bengyu, CHEN Erxue
In the middle of July, 2011, 1. Elaeagnus angustifolia, 2. Blister. Using Li-6400 portable photosynthesis system (li-cor, USA) and li-3100 leaf area meter, the photosynthetic physiological characteristics of desert plants were observed. The symbols in the observation data have the following meanings: Obs, number of observations;Photo, net photosynthetic rate, moles of CO2 times m minus 2 times s minus 1; Cond, stomatal conductance, mol H2O•m -- 2•s -- 1;Ci, intercellular CO2 concentration, moles of CO2 times mol-1; Trmmol, transpiration rate, mmol H2O•m -- 2•s -- 1;Vpdl, water vapor pressure deficit, kPa; Area, leaf Area, cm2;Tair, atmospheric temperature, ℃; Tleaf, leaf surface temperature, ℃;CO2R, CO2 concentration in the reference chamber, moles of CO2•mol-1; CO2S, sample chamber CO2 concentration, moles of CO2•mol-1;H2OR, water in the reference chamber, mmol H2O•mol-1; H2OS, sample chamber moisture, mmol H2O•mol-1;PARo, photon flux density, mole •m -- 2•s -- 1; Rh-r, reference room air relative humidity, %;Rh-s, relative humidity of air in sample room, %; PARi, photosynthetic effective radiation, moles •m -- 2•s -- 1;Press, atmospheric pressure, kPa; Others are the state parameters of the instrument at the time of measurement.
SU Peixi
The data is the digitization of the Heihe River basin part of the 1:1 million Vegetation Atlas of China, 1:1000, 000 Vegetation Atlas of China is edited by academician Hou Xueyu, a famous vegetation ecologist (Hou Xueyu, 2001). It is jointly compiled by more than 250 experts from 53 units such as research institutes of Chinese Academy of Sciences, relevant ministries and commissions, relevant departments of various provinces and regions, colleges and universities. It is another summative achievement of vegetation ecologists in China over 40 years after the publication of monographs such as vegetation of China Basic map of natural resources and natural conditions of the family. It is based on the rich first-hand information accumulated by vegetation surveys carried out throughout the country over the past half century, and the materials obtained by modern technologies such as aerial remote sensing and satellite images, as well as the latest research achievements in geology, soil science and climatology. It reflects in detail the distribution of vegetation units of 11 vegetation type groups, 796 formations and sub formations of 54 vegetation types, horizontal and vertical zonal distribution laws, and also reflects the actual distribution of more than 2000 dominant species of plants, major crops and cash crops in China, as well as the close relationship between dominant species and soil and ground geology. The atlas is a kind of realistic vegetation map, reflecting the recent quality of vegetation in China.
HOU Xueyu
The data is a fisheye photo above the interception barrel of the Picea crassifolia plot in the Tianlaochi small watershed of Qilian Mountain. The plot has a latitude and longitude of 38.44N, 99.91E, and an altitude of 2793m. Photo DSC_0008——DSC_0097 corresponds to Fisheye photos above interception barrels 1 to 90 respectively. The camera is directly above the interception barrel and the lens is 1m above the ground. It is used to estimate the cover or LAI of Qinghai spruce forest, and the pictures are processed with Gap Light Analyzer software.
ZHAO Chuanyan, MA Wenying
At the end of September and the beginning of October, 2011, a year-end ecological survey was carried out in heihe river basin for plants of different desert types to stop growing. There are altogether 8 survey and observation fields, which are: piedmont desert, piedmont gobi, middle reaches desert, middle reaches gobi, middle reaches desert, lower reaches desert, lower reaches gobi and lower reaches desert, with a size of 40m×40m. Three 20m×20m large quadrats were fixed in each observation field, named S1, S2 and S3, and regular shrub surveys were conducted.Each large quadrat was fixed with 4 5m x 5m small quadrats, named A, B, C, D, for the herbal survey.
SU Peixi
In mid-july 2011, photosynthetic organs (leaves or assimilating branches) of typical desert plants were collected and brought back to the laboratory in a liquid nitrogen tank for determination. The analysis indexes mainly include soluble protein unit: mg/g;Free amino acid unit: g/g;Chlorophyll content unit: mg/g;Superoxide dismutase (SOD) unit: U/g FW;Catalase (CAT) unit: U/(g•min);POD unit: U/(g•min);Proline (Pro) unit: g/g; Soluble sugar unit: g/g;Malondialdehyde (MDA) is given in moles per liter.
SU Peixi
A small lysimeter was made by ourselves, which simulated the natural conditions and selected typical desert plants as the object to study the water consumption and its law. Repeat 3 times for each plant.
SU Peixi
In mid July 2011, the photosynthetic organs (leaf or assimilating branches) of typical desert plants were collected and determined by laboratory. The indicators include: leaf water potential, total leaf water content, relative water content, dry weight water content, leaf dry matter content, specific leaf area, specific leaf volume, free water, bound water, etc.
SU Peixi
This data includes three parts of data, namely shrub water holding experiment, shrub interception experiment and shrub transpiration experiment data. Shrub water holding experiment: select the two shrub types of Caragana jubata and Potentilla fruticosa, respectively pick the branches and leaves of the two vegetation types, weigh their fresh weight, carry out water holding experiment, measure the saturated weight of branches and leaves, dry weight of branches and leaves, dry weight of branches and leaves after completion, and finally obtain the data of branches, leaves and total water holding capacity. Shrub interception experiment: two shrubs, Caragana jubata and Potentilla fruticosa, were also selected and investigated. 30 rain-bearing cups were respectively arranged under the two shrubs. after each rainfall, penetration rainfall was measured and observed from June 1, 2012 to September 10, 2012. Shrub Transpiration Experiment: Potentilla fruticosa on July 14, Caragana jubata on August 5, Salix gilashanica on August 15, 2012. The measurement is made every hour according to the daily weather conditions.
ZHAO Chuanyan, MA Wenying
China 1:100000 data of land use is a major application in the Chinese Academy of Sciences "five-year" project "the national resources and environment remote sensing macroscopic investigation and study of dynamic organized 19 Chinese Academy of Sciences institute of remote sensing science and technology team, by means of satellite remote sensing, in three years based on Landsat MSS, TM and ETM remote sensing data established China 1:100000 images and vector of land use database.The main contents include: China 1:100,000 land use data;China 1:100,000 land use graph data and attribute data. The data was directly clipped from China's 1:100,000 land-use data.A hierarchical land cover classification system was adopted for the land use data of heihe basin of 1:100,000, and the whole basin was divided into 6 primary categories (arable land, forest land, grassland, water area, urban and rural areas, industrial and mining areas, residential land and unused land) and 26 secondary categories.The data type is vector polygon, which is stored in Shape format.There are two types of data projection: WGS84/ALBERS;Data coverage covers the new heihe watershed boundary (lack of outer Mongolia data). Land use classification attributes: The first class type and the second class type attributes encode the spatial distribution position Cultivated paddy field 113 is mainly distributed in alluvial plain, basin and valley Cultivated paddy field 112 distributed in hilly valley narrow valley platform or beach (with irrigation conditions) Cultivated paddy field 111 is mainly distributed in mountain valley narrow valley platform or beach (with better irrigation conditions) Arable land 124 is mainly distributed in mountainous areas, the slope is generally more than 25 degrees (belongs to the steep slope hanging land), should be returned to forest. Cultivated dry land 123 is mainly distributed in basins, piedmont belts, river alluvial, diluvial or lacustrine plains (water shortage and poor irrigation conditions). Cultivated dry land 122 is mainly distributed in hilly areas (shaanxi, gan, ning, qing).In general, the plot is distributed on gentle slopes and x and sockets of hills. Arable land 121 is mainly distributed in the mountainous area, with an elevation of 4000 meters below the slope (gentle slope, mountainside, steep slope platform, etc.) and mountain front belt. Woodlands have woodlands (trees) 21 mainly distributed in the mountains (below 4000 meters above sea level) or in the slope, valley two slopes, mountain tops, plains.In qinghai nanshan, qilian mountains are. Woodland shrub 22 is mainly distributed in the higher mountain areas (below 4500 m), most of the distribution of hillside and valley and sand. Forest dredging 23 mainly distributed in the mountains, hills, plains and sandy land, gobi (soil, gravel) edge. Other woodlands 24 are mainly distributed in the oasis ridge, river, roadside and rural residential areas around. Grassland 31 is generally distributed in mountainous areas (gentle slopes), hills (steep slopes) and interriver beaches, gobi desert, sandy hills, etc. The covered grassland 32 is mainly distributed in dry places (next door low-lying land and sandy hills, etc.). Grassland low cover grassland 33 mainly grows in drier places (loess hills and sandy edges). The river channel 41 is mainly distributed in the plain, the cultivated land between the rivers and the valleys in the mountains. Water lakes are mainly distributed in low-lying areas. The reservoirs are mainly distributed in the intermountain lowlands and intersandy hills in qinghai province. Water area glaciers and permanent snow 44 mainly distributed in the plain, the valley between the river, there are surrounding residents and arable land. Waters and beaches are mainly distributed on the top of (over 4000) mountains.
WANG Jianhua, LIU Jiyuan
The data are from 2011 to 2012. A 30m×30m Picea crassifolia canopy interception sample plot was set up in the Picea crassifolia sample plot at an altitude of 2800m m. A siphon raingauge model DSJ2 (Tianjin Meteorological Instrument Factory) was set up on the open land of the river about 50m from the sample plot to observe the rainfall outside the forest and its characteristics. Penetrating rain in the forest adopts a combination of manual observation and automatic observation. Automatic observation is mainly realized through a penetrating rain collection system arranged in the interception sample plot, which consists of a water collecting tank and an automatic recorder. Two 400cm×20cm water collecting tanks are connected with DSJ2 siphon rain gauge, and the change characteristics of penetrating rain under the forest are continuously recorded by an automatic recorder. Due to the spatial variability of the canopy structure of Picea crassifolia forest in the sample plot, a standard rainfall tube for manual observation is also arranged in the sample plot to observe the penetrating rain in the forest. Ninety rainfall tubes with a diameter of 20cm are arranged in the sample plot at intervals of 3m. After each precipitation event ends and the penetrating rain in the forest stops, the amount of water in the rain barrel will be emptied and the penetrating rain in the barrel will be measured with the rain cup.
ZHAO Chuanyan, MA Wenying
Investigation of plant sample plots can reflect the structure and distribution of plant communities, the declining succession of plant communities and their interrelation with environmental changes, reveal the ecological damage process in the lower reaches of the Tarim River, and provide scientific basis for the environmental remediation of the Tarim River Basin in the large-scale development of the western part of the country. According to the difference of species composition of plant communities in different sections of 9 monitoring sections in the lower reaches of Tarim River, plant sample plots are set up along the direction perpendicular to the river course in each monitoring section. Due to the different vegetation growth in each section, the size and number of sample plots are not equal. Among them, the sample plot of 5m×5m is arranged on the section of the herbaceous community. 30m×30m sample plots are arranged on the section where vegetation grows sparsely or is basically free of herbaceous plants, and 4 15m× 15 m arbor and shrub sample plots are arranged at intervals of 15 m; 50m×50m sample plots are arranged on the section where arbor, shrub and grass vegetation all occupy a certain proportion. In each plot of 50×50m, four plots of 25m×25m are set at 25m intervals to record the individual number, coverage, DBH, basal diameter, height and crown width of each tree (or shrub). At the same time, 4 small sample plots of 5m×5m are set up in each sample plot to record the individual number, coverage, height and other indicators of each herbaceous plant, and GPS is used to locate and record the altitude and longitude and latitude of each sample plot. Data content includes: 1. word Document for Statistics of Plant Sample Land Survey Data from 2000, 2002 to 2007 2. 2000 Inventory of Plant Sample Sites in Lower Reaches of Tarim River (Akdun, Yahopumahan, Yingsu, Abodah, Keldayi Section Vegetation Coverage, Canopy Density, Root Weight, etc.) excel Table 3. excel Table of Plant Sample Plot Survey in Lower Reaches of Tarim River in August 2002 (Data on Individual Number, Crown Width, Plant Height, Density and Coverage of Plants in Akdun, Yingsu, Khaldayi, Arakan and Shidaoban Sections) 4. 2003 Inventory of Plant Sample Sites in Lower Reaches of Tarim River (Data on Individual Number, Crown Width, Plant Height, Density and Base Diameter of Plants in Lower Reaches of Tahe River and Herbaceous Biomass in Akerdun Section) excel Table 5. In September 2004, the lower reaches of the Tarim River plant sample plot questionnaire (data of individual number, crown width, plant height, basal diameter (or DBH), coverage and biomass) excel table of the lower reaches of the Tarim River in Yahefu Mahan, Yingsu, Abodah Le, Khaldayi, Tugamale, Arakan, Yiganbuma and Kaogan sections 6. In July 2005, the lower reaches of Tarim River plant sample plot questionnaire (9 monitoring sections in the lower reaches of Tahe River and data of individual number, crown width, plant height, basal diameter (or DBH) and coverage of plants in taitema lake, and herbaceous biomass data in Akerdun section) excel table 7. In July 2006, the lower reaches of Tarim River plant sample plot questionnaire (the number of individual plants, crown width, plant height, basal diameter (or DBH) and herbaceous biomass data of Akerdun section in 9 monitoring sections in the lower reaches of Tahe River) excel table 8. July 2007, the lower reaches of Tarim river plant sample plot questionnaire (the number of individual plants, crown width, plant height, basal diameter (or DBH) and herbaceous biomass data of akdun section in 9 monitoring sections in the lower reaches of Tahe river) excel table
CHEN Yaning, HAO Xingming, WU Lizong
On August 6, 2004, the institute of cold and drought, Chinese academy of sciences, organized a remote sensing experiment in the upper reaches of the heihe river basin, which obtained soil survey data of 14 sections, DEM of 1:500 scale in the drainage ditch basin, spectral data of typical features and synchronous ground observation data of dapingding TM and QuickBird satellite.It mainly includes: 1) spectral measurement data of typical ground objects The data mainly includes in continental river basin in linze county comprehensive research station near the station (hereinafter referred to as linze) of elaeagnus angustifolia, two poplars, tamarisk, bark, ephedra, sand, alfalfa, corn, cotton and salinization land spectra and dew ditch valley concept-people mei, grass, moss, alpine meadow grass, sword leaf thorns son, the spectra of soil and rock. 2) soil profile survey data Valley in line according to the altitude and vegetation types were set up 12 soil profile, and also in front of the row of dew ditch forest weather stations and linze weather station set up a soil profile 1, 14 were measured profile of soil moisture content, bulk density, adhering sand content and soil spectrum, dew ditch forest top weather stations and linze profile is measuring the thermal conductivity of soil and water parameters. 3) field measurement data of biophysical parameters of typical ground objects Standing near the corn, cotton, including linze small pine, alfalfa, and leaf area index measurement data of ephedra row dew in different heights with leaf photosynthesis, leaf area index data and vegetation features data (photosynthetic rate, stomatal conductance, intercellular CO2 concentration, leaf transpiration rate, leaf temperature) and the corresponding environmental factor data (air temperature, air relative humidity and atmospheric CO2 concentration, air, water content, atmospheric pressure, solar total radiation, photosynthetic active radiation). 4) ground synchronization test of remote sensing by large flat-topped satellite The simultaneous observation experiment of TM and QuickBird satellite was carried out in a relatively flat grass area (big flat roof) beside the drainage ditch watershed.On July 27, 2004, spectra, above-ground biomass and leaf area were measured at intervals of 15 meters in a 150m×150m quadrangular at a large flat roof.
LI Xin, RAN Youhua, HUANG Chunlin, QI Yuan, LU Ling, LI Jing, JING Zhefang, PENG Hongchun, Li Haiying, WANG Shugong
This data was compiled by Qiu Baoming, Gao Qianzhao, Peng Qilong, etc. of Lanzhou Desert Research Institute, Chinese Academy of Sciences, and published by Xi'an map publishing house in 1988 (Qiu Baoming, etc., 1988). The grassland is mainly divided into eleven categories: swamp grassland, low humidity grassland, plain desert grassland, plain semi desert grassland, desert riverside sparse forest shrub grassland, mountain desert grassland, mountain semi desert grassland, mountain grassland grassland, mountain meadow grassland, mountain meadow grassland, mountain shrub meadow grassland and ancillary grassland. Property fields include: Grassland code, type, and subclass.
Chou Baoming, Peng Qilong, Gao Qianzhao
Vegetation functional type (PFT) is the combination of large plant species according to the ecosystem function of plant species and the way of resource utilization. Each plant functional type shares similar plant properties, which simplifies the diversity of plant species to the diversity of plant function and structure.Vegetation functional types have been used in the dynamic global vegetation model (DGVM) to predict changes in ecosystem structure and function under global change scenarios.The 1km vegetation functional pattern map of heihe basin is based on the 1km land cover map of heihe basin (MICLCover subset of heihe basin), and is divided by using the vegetation functional climate rules proposed by Bonan et al. (2002).The climate data utilize the 0.1 degree atmospheric drive data of he jie and Yang kun, developing China region from 1981 to 2008.This map can be used in the land surface process model of heihe river basin.
RAN Youhua
In the ecosystem, soil and vegetation are two interdependent factors. Plants affect soil and soil restricts vegetation. On the one hand, there are a lot of nutrients such as carbon, nitrogen and phosphorus in the soil. On the other hand, the availability of soil nutrients plays a key role in the growth and development of plants, directly affecting the composition and physiological activity of plant communities, and determining the structure, function and productivity level of ecosystems. Soil moisture content (or soil moisture content): In the 9 sections from Daxihaizi to taitema lake in the lower reaches of Tarim River, plant sample plots are set in the direction perpendicular to the river channel according to the arrangement of groundwater level monitoring wells. Dig one soil profile in each sample plot, collect one soil sample from 0-5 cm, 5-15 cm, 15-30 cm, 30-50 cm, 50-80 cm, 80-120 cm and 120-170cm soil layers from bottom to top in each profile layer, each soil sample is formed by multi-point sampling and mixing of corresponding soil layers, each soil layer uses aluminum boxes to collect soil samples, weighs wet weight on site, and measures soil moisture content (or soil moisture content) by drying method. Soil nutrient: the mixed soil sample is used for determining soil nutrient after removing plant root system, gravel and other impurities, air-drying indoors and sieving. Organic matter is heated by potassium dichromate, total nitrogen is treated by semi-micro-Kjeldahl method, total phosphorus is treated by sulfuric acid-perchloric acid-molybdenum antimony anti-colorimetric method, total potassium is treated by hydrofluoric acid-perchloric acid-flame photometer method, effective nitrogen is treated by alkaline hydrolysis diffusion method, effective phosphorus is treated by sodium bicarbonate leaching-molybdenum antimony anti-colorimetric method, effective potassium is treated by ammonium acetate leaching-flame photometer method, PH and conductivity are measured by acidimeter and conductivity meter respectively (water to soil ratio is 5: 1). Soil water-soluble total salt was determined by in-situ salinity meter. Drought stress is the most common form of plant adversity and is also the main factor affecting plant growth and development. Plant organs will undergo membrane lipid peroxidation under adverse circumstances, thus accumulating malondialdehyde (MDA), the final decomposition product of membrane lipid peroxide. MDA content is an important indicator reflecting the strength of membrane lipid peroxidation and the damage degree of plasma membrane, and is also an important parameter reflecting the damage of water stress to plants. At the same time, under adverse conditions, the increased metabolism of reactive oxygen species in plants will lead to the accumulation of reactive oxygen species or other peroxide radicals, thus damaging cell membranes. Superoxide dismutase (SOD) and peroxidase (POD) in plants can remove excess active oxygen in plants under drought and other adversities, maintain the metabolic balance of active oxygen, protect the structure of the membrane, and finally enhance the resistance of plants to adversities. The analysis samples take Populus euphratica, Tamarix chinensis and Phragmites communis as research objects. According to the location of groundwater monitoring wells, six sample plots are set up starting from the riverside, with an interval of 50 m between each sample plot, which are sample plots 1, 2, 3, 4, 5 and 6 in turn. Fresh leaves of plants are collected, stored at low temperature, and pretreated (dried or frozen) on the same day. PROline (Pro), cell membrane system protective enzymes superoxide dismutase (SOD) and peroxidase (POD) were tested indoors. Preparation of enzyme solution: weigh 0.5g of fresh material and add 4.5mL pH7.8 with ph 7.8. The materials were homogenized in a pre-frozen mortar, which was placed in an ice bath. Centrifuge at 10000 r/min for 15 min. The supernatant was used for determination of superoxide dismutase, peroxidase and malondialdehyde (MDA). PRO determination: put 0.03 g of material into a 20 mL large test tube, add 10mL ammonia-free distilled water, seal it, put it in a boiling water bath for 30min, cool it, filter, filtrate 5 mL+ ninhydrin 5 mL, develop color in boiling water for 60min, and extract with toluene. The extract was colorized with Shimadzu UV-265 UV spectrophotometer at 515 nm. SOD activity was measured by NBT photoreduction. The order of sample addition for enzyme reaction system is: pH 7.8 PBS 2.4mL+ riboflavin 0.2 mL+ methionine 0.2 mL+EDTA0.1 mL+ enzyme solution 0.1 mL+NBT0.2 mL. Then the test tube was reacted under 40001ux light for 20 min, and photochemical reduction was carried out. SOD activity was measured at 650 nm wavelength by UV-265 ultraviolet spectrophotometer. POD activity determination: the reaction mixture was 50 ml PBS with pH 6.0+28 μ L guaiacol+19 UL30% H2O2. 2 mL of reaction mixture +1 mL of enzyme solution, immediately start timing, reading every 1 min, reading at 470 nm. Determination of chlorophyll: ethanol acetone mixed solution method. After cutting the leaves, the mixed solution of 0.2 g and acetone: absolute ethanol = 1: 1 was weighed as the extraction solution. After extracting in the dark for 24 h, the leaves turned white and chlorophyll was dissolved in the extraction solution. The OD value of chlorophyll was measured by spectrophotometer at 652nm. Determination method of soluble sugar: phenol sulfate method is adopted. (1) The standard curve is made by taking 11 20 ml graduated test tubes, numbering them from 0 to 10 points, and adding solution and water according to Table 1 respectively. Then add 1 ml of 9% phenol solution to the test tube in sequence, shake it evenly, then add 5 ml of concentrated sulfuric acid from the front of the tube for 5 ~ 20 s, the total volume of the colorimetric solution is 8 ml, and leave it at constant temperature for 30 minutes for color development. Then, with blank as control, colorimetric determination was carried out at 485 nm wavelength. With sugar as abscissa and optical density as ordinate, a standard curve was drawn and the equation of the standard curve was obtained. (2) Extraction of soluble sugar: fresh plant leaves are taken, surface dirt is wiped clean, cut and mixed evenly, 0.1-0.3 g are weighed, 3 portions are respectively put into 3 calibration test tubes, 5-10 ml distilled water is added, plastic film is sealed, extraction is carried out in boiling water for 3O minutes, the extraction solution is filtered into a 25 ml volumetric flask, repeated flushing is carried out, and the volume is fixed to the calibration. (3) Absorb 0.5 g of sample solution into the test tube, add 1.5 ml of distilled water, and work out the content of soluble sugar in the same way as the standard curve. The amount of solution and water in each test tube Pipe number 0 1-2 3-4 5-6 7-8 9-10 1.100μg/L sugar solution 0.20 0.40 0.60 1.0 2. water/ml 2.0 1.8 1.6 1.4 1.2 1.0 3. Soluble sugar content/μ g 0 20 40 60 80 100 Determination of malondialdehyde: thiobarbituric acid method. Fresh leaves were cut to pieces, 0.5 g was weighed, 5% TCA5 ml was added, and the homogenate obtained after grinding was centrifuged at 3 000 r/rain for 10 rain. Take 2 ml supernatant, add 0.67% TBA 2 ml, mix, boil in 100 water bath for 30 rain, cool and centrifuge again. Using 0.67% TBA solution as blank, the OD values at 450, 532 and 600 nm were determined. Methods for analysis and testing of plant hormones (GA3, ABA, CK, IAA): 0.1 0.005 g plant samples were taken and ground in liquid nitrogen. 500μl methanol was extracted overnight at 4℃. Centrifuge the sample and freeze-dry the supernatant. 30μl10%% CH3CN dissolved the sample. 10μl of sample solution was analyzed by HPLC. The external standard method was used to quantify plant hormones. Standard plant hormones were purchased from sigma Company. See (Ruan Xiao, Wang Qiang, et al., 2000, Journal of Plant Physiology.26 (5), 402-406) for analysis methods.
CHEN Yaning, HAO Xingming
The dataset of ground truth measurements synchronizing with airborne Polarimetric L-band Multibeam Radiometer (PLMR) mission was obtained in upper reaches of the Heihe River Basin on 1 August, 2012. PLMR is a dual-polarization (H/V) airborne microwave radiometer with a frequency of 1.413 GHz, which can provide multi-angular observations with 6 beams at ±7º, ±21.5º and ±38.5º. The PLMR spatial resolution (beam spot size) is approximately 0.3 times the altitude, and the swath width is about twice the altitude. The measurements were conducted along two transects respectively located at the west and east branches of the Babaohe River and two sampling plots in the A’rou foci experimental area. Along the transects, soil moisture was sampled at every 50 m in the west-east direction. In order to keep the ground measurements following the airborne mission as synchronous as possible in temporal, measurements were made discontinuously. In the A’rou foci experimental area, two sampling plots were identified with areas of 1.5 km × 0.6 km and 0.85 km × 0.6 km. In each plot, soil moisture was sampled at every 50 m in the west-east direction and 100 m in the north-south direction. Steven Hydro probes were used to collect soil moisture and other measurements. Concurrently with soil moisture sampling, vegetation properties were measured at some typical sampling plots. Observation items included: Soil parameters: volumetric soil moisture (inherently converted from measured soil dielectric constant), soil temperature, soil dielectric constant, soil electric conductivity. Vegetation parameters: biomass, vegetation water content, canopy height. Data and data format: This dataset includes two parts of measurements, i.e. soil and vegetation parameters. The former is as shapefile, with measured items stored in its attribute table. The measured vegetation parameters are recorded in an Excel file.
LI Xin, MA Mingguo, WANG Shuguo
Photosynthesis of Populus euphratica is mainly affected by atmospheric CO2 concentration, intercellular CO2 concentration, photosynthetic active radiation and leaf temperature when groundwater level is deep and shallow, but with the decrease of groundwater level, atmospheric CO2 concentration and photosynthetic active radiation become the main factors limiting photosynthesis of Populus euphratica. This is because when the groundwater depth is low, the groundwater supply is sufficient, and the leaves are not limited by the water supply. When the photosynthetic effective radiation is strong, the air temperature and leaf temperature are relatively high, and the relative humidity of the air is small. At this time, the photosynthesis and transpiration are both strong. Stomata mainly adapt to strong transpiration by increasing stomatal conductance, i.e. reducing stomatal resistance. At the same time, CO2 in the air continuously enters cells through open stomata, and becomes the raw material for photosynthesis together with intercellular CO2, thus causing the decrease of CO2 concentration in the air and intercellular space, which is the CO2 supply limitation that often causes photosynthesis inhibition in photosynthesis. However, when subjected to water stress, the supply of CO2 is no longer the main reason for limiting photosynthesis. When the photosynthetic effective radiation increases, the net photosynthetic rate, transpiration rate and stomatal conductance all increase. When the supply of CO2 concentration is relatively sufficient, photosynthesis will be slowed down due to the shortage of water, another necessary raw material for photosynthesis. Water use efficiency and water productivity of plants are of great practical significance for measuring and screening species in arid regions. The flow rate was 400μmol/ s and the leaf temperature was kept at 26°C using the L I-6400 portable photosynthesis analyzer, the CO2 concentration in the reference chamber was kept at 360μmol/ mol or 720μmol/ mol using the CO2 injection system, and the photosynthetically active radiation (PAR) was set at 2000,1500,1200,1000,500,300,50,0 μ mol/(m2) using the 6400-02B L ED light source. s) 。 Twelve healthy and mature leaves were selected from the east, south, west and north of each Populus euphratica to the middle and upper parts respectively, from 8 :00 to 20 :00, and photosynthetic apparatus Li 6400 (Li 6400, LiCOR, Lincoln, NE, USA) respectively measured the net photosynthetic rate (Pn), transpiration rate (Tr), stomatal conductance (gs) and other gas exchange parameters of each leaf, simultaneously measured the atmospheric CO2 concentration (Ca), intercellular CO2 concentration (Ci), photosynthetic effective radiation (Pa r), atmospheric temperature (T a), leaf surface temperature (Tl), air relative humidity (RH) and other parameters, and repeated readings for each leaf 3 times. Water use efficiency (WUE) = Pn/ Tr, stomatal limitation (Ls )= 1-Ci/Ca.
CHEN Yaning, HAO Xingming
The experimental project of vegetation degradation mechanism and reconstruction in Yuanjiang dry-hot valley in Yunnan belongs to the major research program of "Environmental and Ecological Science in Western China" of the National Natural Science Foundation. The principal is researcher Cao Kunfang of Xishuangbanna Tropical Botanical Garden, Chinese Academy of Sciences. The project runs from January 2004 to December 2007. Data collected for this project include: 1. Excel table of multi-year average temperature and rainfall in Yuanjiang dry-hot valley (1961-2004), with attribute fields including monthly average temperature and monthly average rainfall. 2. excel table of annual average temperature (1750-2006) in the middle of Hengduan Mountain in China based on tree ring, with attribute fields including year and reconstructed average temperature. 3. excel table of summer temperatures (1750-2006) in the central Hengduan Mountains in southern China based on tree rings. The attribute fields include the year and the reconstructed average temperature in summer (April-September). 4. excel table of drought index (1655-2005) in central Hengduan Mountains of China based on tree rotation, with attribute fields including year and reconstruction of drought index in spring (March-May). 5. pdf file of growth dynamic graph of leaves and branches. it records the growth dynamic trend line and leaf dynamic trend graph of plants with s-type, f-type, intermediate-type and S+SD-type branches from March 22, 2004 to April 8, 2005. 6.32 Phenological Summary Tables of Woody Plants (word Document: Specific Name, Number of Observed Plants/Branches, Type of Branch Extension, Leaf Phenology, Length of Current Year Branches (cm), Total Leaves on Branches, Leaf Area (cm2), Non-leaf Period (Months), Flowering Period, Fruit Ripening Period and Fruit Type) 7. Seasonal Changes of Relative Water Content of Plant Leaves in Yuanjiang Dry-hot Valley (March 2003-February 2004) Excel Table 8. Seasonal Changes of Photosynthesis of 6 Representative Plants in Yuanjiang Dry-hot Valley (Maximum Photosynthetic Rate, Stomatal Conductance, Water Use Efficiency, Maximum Subefficiency of photosystem II) excle Table (2003-2005) 9. excle Table of Long-term Water Use Efficiency (Isotope) Data of Representative Plants in Yuanjiang Dry-hot Valley (Water Use Efficiency in Dry and Wet Seasons of Shrimp Flower, Red-skin Water Brocade Tree, Three-leaf Lacquer, Phyllanthus emblica, Pearl Tree, Dried Sky Fruit, Cyclobalanopsis glauca, West China Small Stone Accumulation, Geranium, Tiger thorn, Willow and Pigexcrement Bean) 10. word Document of List of Plants in Mandan Qianshan, Yuanjiang
CAO Kunfang
The data set mainly includes observation data of each tree in the super site, and the observation time is from June 2, 2008 to June 10, 2008. The super site is set around the Dayekou Guantan Forest Station. Since the size of the super site is 100m×100m, in order to facilitate the forest structure parameter survey, the super site is divided into 16 sub-sample sites, and tally forest measurement is performed in units of sub-samples. The tally forest measurement factors include: diameter, tree height, height under branch, crown width in transversal slope direction, crown width in up and down slope direction, and tindividual tree growth status. The measuring instruments are mainly: tape, diameter scale, laser altimeter, ultrasonic altimeter, range pole and compass. The data set also records the center point latitude and longitude coordinates of 16 sub-samples (measured by Z-MAX DGPS). The data set can be used for verification of remote sensing forest structure parameter extraction algorithm. The data set, together with other observation data of the super site, can be used for reconstruction of forest 3D scenes, establishment of active and passive remote sensing mechanism models, and simulation of remote sensing images,etc.
CHEN Erxue, BAI Lina, WANG Bengyu, TIAN Xin, LIU Qingwang, CAO Bin, Yang Yongtian, Zhihai Gao, Bingxiang Tan, GUO Zhifeng, WANG Xinyun, FU Anmin, ZHANG Zhiyu, NI Wenjian, WANG Qiang, BAO Yunfei, WANG Dianzhong, ZHANG Yang, ZHAO Liqiong, LIANG Dashuang, WANG Shunli, ZHAO Ming, LEI Jun, NIU Yun, LUO Longfa
Observation time: 2008-06-05 ~ 2008-06-15.A sample strip with a length of 1Km and a width of 20m was set up to cross the super sample plot from the starting point of the super sample plot at the geantan forest station in ohnoguchi.The compass was used to determine the direction of the sample, and the azimuth was 115 degrees north by east, which was basically consistent with the flight route.20 meters ×20 meters of sample land shall be arranged every 50 meters in the sample belt, a total of 20 pieces of sample land.There is some overlap between the sample belt and the super sample land. The center of the no.1 sample land of the sample belt is located at the center of the super sample land. The observation data is shown in the measurement data set per wood of the super sample land.This data set records the observation data of sample 2 ~ 20.These data include the following three parts: 1) tree data of sample plots: each wood of 2 ~ 20 plots was measured: chest diameter, tree height, crown width and undershoot height.Laser altimeter and ultrasonic altimeter were used to measure the height of big trees and under branches, flower rod was used to measure the height of small trees and under branches, chest diameter was used to measure the chest diameter of trees, and crown width was measured with a leather tape measure. 2) sample location data: the sample location is roughly determined by using a tape measure and compass. The coordinates of the center point of the sample are accurately measured using the French THALES DGPS measurement system (model z-max).The observation method is to use two GPS receivers to conduct synchronous static measurement, one in the reference station and the other in the mobile station. The observation lasts 30 minutes. The data processing software provided by the system is used for post-processing difference. 3) LAI observation data: LAI area index (LAI) of each sample plot was measured by lai-2000 and HemiView.
CHEN Erxue, GUO Zhifeng, LIU Qingwang, WANG Bengyu, TIAN Xin, WANG Xinyun, FU Anmin, ZHANG Zhiyu, NI Wenjian, WANG Qiang, CAO Bin, Yang Yongtian, Zhihai Gao, Bingxiang Tan, WANG Dianzhong, ZHANG Yang, ZHAO Liqiong, LIANG Dashuang
The main contents of this data set are forest, shrub and grassland sample plot survey data.The fixed samples are located in the drainage ditch valley of qilian mountain and the dayaokou valley where the hydrology observation and test site of the water source conservation forest research institute of gansu province is located. The information of the sample is as follows: Number elevation quadrat size longitude latitude surface type G1 2715 20 × 20 100 ° 17 '12 "38 ° 33' 29" qinghai spruce forest G2 2800 20×36 100°17 '07 "38°33' 27" moss spruce forest G3 2840 20×20 100°17 '37 "38°33' 05" moss spruce forest G4 2952 20 × 20 100 ° 17 '59 "38 ° 32' 47" qinghai spruce forest G5 3015 20 × 20 100 ° 18 '06 "38 ° 32' 42" qinghai spruce forest G6 3100 20 × 20 100 ° 18 '13 "38 ° 32' 31" thicket qinghai spruce forest G7 3300 23.5 × 20 thickets qinghai spruce forest G8 2800 20×20 100°13 '30 "38°33' 29" moss spruce forest B1 2700 12.8×25 moss spruce forest B2 2800 20×20 100°17 '38 "38°32' 59" moss spruce forest B3 2900 20×20 100°17 '59 "38°32' 51" grass spruce forest B4 3028 20×20 100°17 '59 "38°32' 39" moss spruce forest B5 3097 20×20 100°18 '02 "38°32' 32" moss spruce forest B6 3195 20 × 20 100 ° 18 '06 "38 ° 32' 25" qinghai spruce forest B7 2762 20 × 20 100 ° 17 '08 "38 ° 33' 21" qinghai spruce forest B8 2730 20×20 100°17 '06 "38°33' 27" moss spruce forest GM1 3690 5×5 100°18 '02 "38°32' 02" caragana scrub (middle) GM2 3690 5×5 100°18 '02 "38°32' 02" caragana scrub (rare) GM3 3700 5×5 100°18 '03 "38°32' 03" caragana + jilaliu shrub (dense) GM4 3600 5×5 100°18 '10 "38°32' 06" caragana + jila willow thicket (middle) GM5 3600 5×5 100°18 '10 "38°32' 06" caragana + jila willow shrub (sparse) GM6 3600 5×5 100°18 '10 "38°32' 06" caragana + jila willow thicket (dense) GM7 3500 5×5 100°18 '14 "38°32' 08" caragana + jila willow thicket (middle) GM8 3500 5×5 100°18 '14 "38°32' 08" caragana + jila willow thicket (dense) GM9 3500 5×5 100°18 '14 "38°32' 08" caragana + jila willow thicket (rare) GM10 3400 5×5 100°18 '18 "38°32' 12" golden pheasant scrub (rare) GM11 3400 5×5 100°18 '18 "38°32' 12" golden pheasant + golden raspberry shrub (dense) GM12 3400 5×5 100°18 '18 "38°32' 12" golden pheasant scrub (rare) GM13 3300 5 × 5 100 ° 18 '21 "38 ° 32' 21" giraliu thicket GM14 3300 5 × 5 100 ° 18 '21 "38 ° 32' 21" caragana + jila shrub GM15 3300 5 × 5 100 ° 18 '21 "38 ° 32' 21" caragana + jila shrub YC3 2700 1×1 100°17 '14 "38°33' 33" needle thatch field YC4 2750 1×1 100°17 '18 "38°33' 32" needle thatch field YC5 2800 1×1 100°17 '21 "38°33' 33" needle thatch field YC6 2850 1×1 100°17 '25 "38°33' 33" needle thatch field YC7 2900 1×1 100°17 '31 "38°33' 32" aster + needle thatch field YC8 2950 1×1 100°17 '44 "38°33' 23" needle thatch field YC9 2980 1×1 100°17 '48 "38°33' 25" needle thatch field The sample geodesic tree data were surveyed from July to August 2007.The survey included: 1. Basic survey of sample plots in drainage ditch basin: A) sample land setting: sample land number, elevation, slope direction, slope position, slope, soil layer thickness, sample land size, longitude and latitude, community type, soil type, operation status, age B) survey of each wood in the sample plots: sample plot number, tree number, tree species, tree classification, chest diameter, tree height, undershoot height, crown radius 2. Soil profile survey record sheet Including forest/vegetation status, major tree species, forest age, soil name, surface soil erosion, parent rock and material, drainage conditions, land use history, soil profile (soil layer, moisture, color, texture, structure, root system, gravel content) 3. Standard ground cover factor Standard land area, dominant tree species, stand/vegetation origin, elevation, slope direction, slope position, slope, cutting and utilization method, afforestation land preparation type, survey method, canopy coverage, living ground cover, dead cover cover, litter thickness (undivided strata, semi-decomposed layer, decomposed layer) 4. Canopy survey: 5. Draft quadrat (1m×1m) survey record sheet Including species name, number, coverage, average height 6. Results of determination of soil physical properties in source forest of qilian mountain (land sample survey) Contains the soil physical properties measurement process (+ wet mud weight aluminum box, aluminum box, soil moisture content, suddenly bulk density, etc.), bringing biomass measurement (total fresh weight of shrub and herb, fresh weight of sample, sample dry weight, etc.), litter dry weight (including mosses) layer and the largest capacity calculation process (of moss and litter thickness, total fresh weight, fresh weight of samples, the dry weight of the sample, soaking for 24 h after heavy, maximum water holding capacity, the largest water depth, the biggest hold water rate, maximum moisture capacity) 7. Bush sample survey: Including species name, number, coverage, average height 8. Standard sample land setting and questionnaire for each wooden inspection ruler Including tree species, tree classification, age, chest diameter, number of height, undershoot height, crown radius 9. Litter layer survey record sheet Including litter (decomposed layer, semi-decomposed layer, decomposed layer) thickness 10. Update survey records: Including tree species, natural regeneration (height <30cm, height 31-50cm, height >51cm), artificial regeneration (height <30cm, height 31-50cm, height >51cm) This data set can provide ground measured data for remote sensing inversion of forest structure parameters.
WANG Shunli, LUO Longfa, WANG Rongxin, CHE Zongxi, JING Wenmao
I. Overview The long-term sequence China Vegetation Index dataset is mainly for the normalized vegetation index (NDVI), based on four bands synthesized every 10 days from 1 April 1998 to 31 December 2011 with a spatial resolution of 1 km. Spectral reflectance and 10-day maximized NDVI dataset. Ⅱ. Data processing description The VEGETATION sensor was launched by SPOT-4 in March 1998, and has received SP0T VGT data for global vegetation coverage observation since April 1998. It has a very complete and efficient image ground processing mechanism system. The VEGETATION data is mainly received by the Kiruna ground station in Sweden. The image quality monitoring center in Toulouse, France is responsible for image quality and provides related parameters (such as calibration coefficients). Finally, the image processing and archiving center of VITO Institute in Belgium Global VEGETATION data archiving and user orders. Among them, VGT-P (prototype) data products mainly provide scientific researchers with high-quality physical quantity prototype data in order to facilitate their research and development of algorithms and application models. The data undergoes strict systematic error correction and resampling into a longitude and latitude network projection, the pixel resolution is lkm, and the pixel brightness value is the reflectivity of the ground features on the top layer of the atmosphere. In addition to providing four bands of raw data, relevant auxiliary parameters such as atmospheric conditions, system information (solar zenith angle, azimuth, field of view, and reception time) and terrain data are also provided according to user needs. VGT-S (synthesis) products provide atmospheric-corrected surface reflectance data, and use multi-band synthesis techniques to obtain a normalized vegetation index (w) data set with lkm resolution. VGI-S products include the spectral reflectance and NDVI data set (s1) of four bands synthesized daily, the spectral reflectance of four bands synthesized every 10 days, and the maximum NDVI data set (S10) every 10 days to reduce cloud and The impact of BRDF, while S10 was also resampled into 4km resolution (S10.4) and 8km resolution (S10.8) datasets. VGT-S products are widely used for their high time resolution. This data set contains the spectral reflectance of four bands synthesized every 10 days and the 10-day maximized NDVI data set (S10). The pre-processing of SPOT source data includes atmospheric correction, radiation correction, and geometric correction. NDVI data with a maximum of 10 days of synthesis is generated, and the values of -1 to -0.1 are set to -0.1, and then formula YDN = (JNDVI +0.1) /0.004 Convert to a YDN value from 0 to 250. Ⅲ. Data content description The long-term sequence China Vegetation Index dataset is mainly for the normalized vegetation index (NDVI), based on four bands synthesized every 10 days from 1 April 1998 to 31 December 2011 with a spatial resolution of 1 km. Spectral reflectance and 10-day maximized NDVI dataset. The SPOT-VEGETATION-NDVI data set contains .zip compressed files with time resolution from April 1, 1998 to December 31, 2011. After decompression, it is an ESRI-GRID file with a scene every 10 days. The SPO-VEGETATION-NDVI data set naming rules are: v-yymmdd, where v is the abbreviation of vegetation, yymmdd represents the date of the file, and is the main identifier that distinguishes other files. Ⅳ. Data usage description An important feature of the Vegetation Index product is that it can be converted into leaf crown biophysical parameters. Vegetation index (VI) also plays an "intermediate variable" in the acquisition of vegetation biophysical parameters (such as foliar index LAI, green shade, fAPAR, etc.). The relationship between vegetation indices and vegetation biophysical parameters is currently being studied using globally representative ground, aircraft and satellite observation datasets. These data can be used to evaluate the performance of the VI algorithm before satellite launch, and also provide the conversion coefficient between the vegetation index product and the biophysical characteristics of the leaf crown. The use of biophysical data is part of the Vegetation Index Verification Program. Vegetation index products will play a major role in several Earth Observation System (EOS) studies and are also part of global and regional biosphere model products in recent years.
XUE Xian, DU Heqiang
NDVNDVI project belongs to the national natural science foundation "environment and ecological science in western China" major research program, led by professor gao qiong of Beijing normal university. The project runs from 2003.1-2005.12. Remittance data of the project: 1. Monitoring data of photosynthesis of 8 plants in ansai station in 2002 (excel) 2. Monitoring data of photosynthesis of 6 plants near the lime temple of ijin horo banner in July 2003 (excel) 3. Monitoring data of photosynthesis of 5 kinds of plants in wufen gutter of huangfuchuan, jungeer banner in July 2003 (excel)
GAO Qiong
The forest hydrology experimental area of Heihe River integrated remote sensing experiment includes the dense observation area of Dayekou basin and the dense observation area of Pailugou basin. Due to the concentrated distribution of the fixed sample plots in the drainage ditch basin, these sample plots lack of representativeness to the forest of the whole dayokou basin, so in June 2008, 43 temporary forest sample plots were set up in the whole dayokou basin. The data set is the ground observation data of the 43 temporary plots. In addition to the measurement and recording of stand status and site factors, Lai was also observed. The instruments used to measure each wood in the sample plot are mainly tape, DBH, flower pole, tree measuring instrument and compass. The DBH, tree height, height under branch, crown width in cross slope direction, crown width along slope direction and single tree growth were measured for each tree. WGS84 latitude and longitude coordinates of the center point of the sample plot were measured with different hand-held GPS, and the positioning error was about 5-30m. Other observation factors include: Forest Farm, slope direction, slope position, slope, soil thickness, canopy density, etc. The implementation time of these temporary sample plots is from 2 to 30 June 2008. The data set can provide ground data for the development of remote sensing inversion algorithm of forest structure parameters.
LING Feilong, HE Qisheng, ZHANG Xuelong, WANG Shunli, ZHAO Ming, LEI Jun, NIU Yun, LUO Longfa, CHEN Erxue
The fixed forest sample plot is located in the drainage ditch of Dayekou, Qilian Mountain, where the hydrological observation field of Gansu Water Conservation Forest Research Institute is located. From July 2003 to August 2003 and from July 2007 to August 2007, the tree survey of the sample plot was completed by technicians from Gansu Water Conservation Forest Research Institute and Institute of environment and Engineering in cold and dry areas of Chinese Academy of Sciences. A total of 17 fixed forest samples were observed, including the survey of sample plot factors and the survey of each tree. The observation factors of sample plots mainly include forest farm, longitude and latitude coordinates, slope direction, slope position, slope, soil thickness, canopy density of arbor layer, leaf area index, etc. The main instruments used in the measurement are tape, DBH, flower pole, tree measuring instrument, compass and fish eye camera. The measurement factors of each tree include DBH, height of tree, height under branch, crown width in cross slope direction, crown width along slope direction, growth status of single tree, etc. For details, please refer to the metadata of "Heihe River Integrated Remote Sensing joint test: fixed sample plot tree survey data set (2003)" and "Heihe River Integrated Remote Sensing joint test: fixed sample plot tree survey data set (2007)". The Lai in this data set is the supplementary measurement data during the joint remote sensing experiment of Heihe River in 2008. That is to say, the supplementary measurement of Lai has been done in these fixed plots. The supplementary observation time of Lai was from June 1 to 13, 2008. 15 of the 17 fixed plots were investigated. Four instruments were used to observe each plot. In addition to the commercial instruments such as hemiview fish eye camera, LAI-2000 and trac, these instruments also use the canopy analysis instrument made by Beijing Normal University. In each 20 m × 20 m plot, trac measures along two parallel routes perpendicular to the direction of sunlight incidence, which can basically represent the entire quadrat; hemiview fisheye camera and LAI-2000 measure the same points, that is, take three points on the trac line, plus the center point of the quadrat, a total of 7 measuring points. This set of data set can provide ground data for the study of remote sensing inversion method of forest structure parameters.
SONG Jinling, FU Zhuo, LI Shihua, ZOU Jie, ZHANG Xuelong, WANG Shunli, ZHAO Ming, LEI Jun, NIU Yun, LUO Longfa, LING Feilong, HE Qisheng, CHEN Erxue
This dataset: Editor-in-Chief: Hou Xueyu Drawing: Hou Xueyu, Sun Shizhou, Zhang Jingwei, He Miaoguang. Wang Yifeng, Kong Dezhen, Wang Shaoqing Publishing: Map Press Issue: Xinhua Bookstore Year: 1979 Scale: 1: 4,000,000 It took five years to complete from May 1972 to July 1976. In the process of drawing legends and mapping, referring to the vast majority of vegetation survey data (including maps and texts) after 1949 in China, we held more than a dozen mapping seminars involving researchers from inside and outside the institute. During the layout after the mapping work was completed, many new survey data were added, especially vegetation data in western Tibet. The nature of this map basically belongs to the current vegetation map, including two parts of natural vegetation and agricultural vegetation. The legend of natural vegetation is arranged according to the seven vegetation groups. They are mainly divided according to the appearance of plant communities and certain ecological characteristics. The concept of agricultural vegetation community, like the natural vegetation community, also has a certain life form (appearance, structure, layer), species composition and a certain ecological location. In 1990, the State Key Laboratory of Resources and Environmental Information Systems of the Institute of Geographical Sciences and Resources, Chinese Academy of Sciences completed the digitization of this map, and wrote relevant data description documents. The digitized data also adopt equal product cone projection and can be converted into other projections by GIS software. This data includes a vector file in e00 format, a Chinese vegetation coding design description, a dataset description, a vegetation data layer attribute data table, and a scanned "People's Republic of China Vegetation Map-Brief Description" and other files. Data projection: Projection: Albers false_easting: 0.000000 false_northing: 0.000000 central_meridian: 110.000000 standard_parallel_1: 25.000000 standard_parallel_2: 47.000000 latitude_of_origin: 0.000000 Linear Unit: Meter (1.000000) Geographic Coordinate System: Unknown Angular Unit: Degree (0.017453292519943299) Prime Meridian: Greenwich (0.000000000000000000) Datum: D_Unknown Spheroid: Clarke_1866 Semimajor Axis: 6378206.400000000400000000 Semiminor Axis: 6356583.799999999800000000 Inverse Flattening: 294.978698213901000000
HOU Xueyu, SUN Shizhou, ZHANG Jingwei, HE Miaoguang, WANG Yifeng, KONG Dezhen, WANG Shaoqing
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS 0931-4967287 poles@itpcas.ac.cnLinks
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved | No.11010502040845
Tech Support: westdc.cn