Climate records obtained by most instruments are relatively short in time, which limits the study of climate change, necessitating the use of proxy data to extend records to the past. It was not until the late 1940s that atmospheric data of sufficient quality and spatial resolution were available to determine the main patterns of climate change such as the North American Pacific model and the Pacific Decadal Oscillation. The global ice cores are from the north and south poles and the third pole, and there are also mountain glaciers in Alaska. The ice core data obtained in that area are of great significance for revealing the climate in North America and climate change in the Arctic regions at both low and high latitudes. The physical meaning of each variable: First column: time; second column: accumulation rate data; third column: oxygen isotope data value
Du Zhiheng
Snow water equivalent (the product of snow depth and density) is an important factor reflecting the change in snow cover on the ground surface, and it is also an important parameter in surface hydrological models and climatic models. As the “Headwaters of Asia”, the Tibetan Plateau is the source of several major rivers, which are fed with glacier and snow meltwater. Based on the sensitivity of passive microwave radiation to snow, these monitoring data enable long-term inversion of snow water equivalents in the High Asia region. The data set includes daily snow water equivalent, monthly snow water equivalent and five-day snow water equivalent, and these data can be applied in analyses of local hydrology, animal husbandry production and other fields.
QIU Yubao
The High Asia region is an area sensitive to global changes in mid-latitude regions and is a hotspot for research. The lakes in the territory are scattered, and the lake freeze-thaw process is one of the key factors sensitive to global change. Due to the large difference in the dielectric constant between ice and water, satellite-borne passive microwave remote sensing is weather insensitive and has a high revisiting rate; thus, it can achieve rapid monitoring of the freeze-thaw state of lakes. According to the area ratio of the lake and the land surface in the sub-pixels of passive microwave radiometer data, this data set represents the lake brightness temperature information of the pixel (sub-pixel level) by applying the hybrid pixel decomposition method in order to monitor the lake freeze-thaw process in the High Asia region. Thus, by adopting a variety of passive microwave data, time series of lake brightness temperature and freeze-thaw status were obtained for a total of 51 medium to large lakes from 2002 to 2016 in the High Asia region. Using cloudless MODIS optical products as validation data, three lakes of different sizes in different regions of High Asia, i.e., Hoh Xil Lake, Dagze Co Lake, and Kusai Lake, were selected for freeze-thaw detection validation. The results indicated that the lake freeze-thaw parameters obtained by microwave and optical remote sensing were highly consistent, and the correlation coefficients reached 0.968 and 0.987. This data set contained the time series brightness temperature of lakes and the freeze-thaw parameters of lake ice, which could be used to further invert the characteristic parameters of lakes and enhance the understanding of lake ice freezing and thawing in the High Asia region. This database will be useful in the assessment of climatic and environmental changes in the High Asia region and in global climatic change response models. The data set consists of two parts: the passive microwave remote sensing brightness temperature data set of 51 lakes in the High Asia region from 2002 to 2016, with an observation interval of 1 to 2 days, and the lake ice freeze-thaw data set obtained by estimation of the lake brightness temperature. The files are the lake brightness temperature data via the nearest neighbour method and pixel decomposition in the form of a .zip file (12 MB) and the lake freeze-thaw data set for 51 lakes in the High Asia region from 2002 to 2016 in the form of an .xls file (0.1 MB).
QIU Yubao
The Greenland Ice Sheet Project Two (GISP2), initiated by the United States, has provided detailed oxygen isotope data for a time span of more than 100,000 years, covering almost the entire glacial-interglacial cycle. These data include the oxygen isotope changes from 818 to 1987, with a clear record showing that the Little Ice Age was the coldest period of the past 1000 years. Fluctuating warming occurred from 1850 to 1987, and the changes were consistent with those of GRIP, NGRIP and the latest NEEM ice core obtained in Greenland. This finding indicated that the snow and ice records from the Greenland ice sheet were highly consistent. The physical meaning of each variable is as follows: First column: ice core depth; second column: oxygen isotope value; third column: time
Du Zhiheng
From 1000 AD to the present, the concentration of methane in the atmosphere has increased significantly in the ice cores of the Antarctic and Arctic. These data came from the Tasmanian laboratory of Australia, where the high resolution data were obtained by using wet extraction of ice core samples, and the same measurement and calibration procedures were applied to all samples. The results are consistent with the results of internationally renowned ice core greenhouse gas laboratories such as the University of Bern, the University of Copenhagen and the University of Ohio. The physical meaning of each variable: First column: time; second column: methane concentration value
Du Zhiheng
The microwave radiometer data set comprises brightness temperature data from SMMR (1978-1987), SSM/I (1987-2009) and SSMIS (2009-2015), with temporal coverage from 1978 to 2015 and a spatial resolution of 25 km. Each Antarctic data file consists of 316*332 grids, and each Arctic freeze-thaw data file consists of 304*448 grids. The microwave scatterometer data set comprises backscattering data from QScat (2000-2009) and ASCAT (2009-2015), with a temporal coverage from 2000 to 2015 and a spatial resolution of 4.45 km. Each Antarctic data file consists of 1940*1940 grids, and each Arctic data file consists of 810*680 grids. The temporal resolution of the data set is one day, and the data cover both Antarctica and Arctic ice sheets.
Li Xinwu, Liang Lei
Using the Modis1B data of 11 scenes from 2003 to 2013 (the ice shelf Modis1B data published on the NSIDC website), the surface velocity of the Antarctic Amery Ice Shelf was extracted by the subpixel cross-correlation method, the ice velocity was extracted by the COSI-Corr software, and then the time sequence of annual average velocities for nearly ten years was obtained. Due to the lack of field observations in the study area, the accuracy of the ice flow results was estimated by using the offset value of the stable region, and the ice flow error was approximately ±50 m/year. The ice velocity data date from 2003 to 2013, the temporal resolution is one year, and the data cover the Amery area with a spatial resolution of 500 m. A GeoTIFF file of velocity data is stored every year. For details regarding the data, please refer to the Amery Ice Flow Field - Data Description.
JIANG Liming
Under the background of global warming, mountain glaciers worldwide are facing strong ablation and retreat, but from existing field observations, it is found that most of the glaciers in the Karakorum region remain stable or are advancing, which is called the ＂Karakorum anomaly＂. Glacier surface velocity is an important parameter for studying glacier dynamics and mass balance. Studying the temporal and spatial variation characteristics of glacier velocity in central Karakorum is significant for understanding the dynamic characteristics of the glacier in this region and its response to climate change. Four pairs of Landsat 7 ETM+ images acquired in 1999 to 2003 (images acquired on 1999.7.16, 2000.6.16, 2001.7.21, 2002.8.9, 2002.4.19, 2003.3.21) were selected; using the panchromatic band with a resolution of 15 m, each pair of images was accurately registered, and then cross-correlation calculations were then performed on each image pair after registration to obtain the surface velocity of the glacier in the central Karakorum region from 1999 to 2003. Due to the lack of velocity observation data in the study area, the accuracy of the ice flow results is estimated using the offset value of the stable region, and the surface velocity error of the glacier is approximately ±7 m/year. The glacier velocity data dates are from 1999 to 2003, with a temporal resolution of one year. They cover the central Karakorum region, with a spatial resolution of 30 m. The data are stored as a GeoTIFF file every year. For details regarding the data, please refer to the data description.
JIANG Liming
The Antarctic ice sheet elevation data were generated from radar altimeter data (Envisat RA-2) and lidar data (ICESat/GLAS). To improve the accuracy of the ICESat/GLAS data, five different quality control indicators were used to process the GLAS data, filtering out 8.36% unqualified data. These five quality control indicators were used to eliminate satellite location error, atmospheric forward scattering, saturation and cloud effects. At the same time, dry and wet tropospheric, correction, solid tide and extreme tide corrections were performed on the Envisat RA-2 data. For the two different elevation data, an elevation relative correction method based on the geometric intersection of Envisat RA-2 and GLAS data spot footprints was proposed, which was used to analyze the point pairs of GLAS footprints and Envisat RA-2 data center points, establish the correlation between the height difference of these intersection points (GLAS-RA-2) and the roughness of the terrain relief, and perform the relative correction of the Envisat RA-2 data to the point pairs with stable correlation. By analyzing the altimetry density in different areas of the Antarctic ice sheet, the final DEM resolution was determined to be 1000 meters. Considering the differences between the Prydz Bay and the inland regions of the Antarctic, the Antarctic ice sheet was divided into 16 sections. The best interpolation model and parameters were determined by semivariogram analysis, and the Antarctic ice sheet elevation data with a resolution of 1000 meters were generated by the Kriging interpolation method. The new Antarctic DEM was verified by two kinds of airborne lidar data and GPS data measured by multiple Antarctic expeditions of China. The results showed that the differences between the new DEM and the measured data ranged from 3.21 to 27.84 meters, and the error distribution was closely related to the slope.
HUANG Huabin
This data set contains the wide swath mode Level 1B SAR data acquired over Greenland in 2005 by the ASAR sensor of the ENVISAT-1 satellite. The width is 400 km, the spatial resolution is 75 m, and the absolute positioning accuracy is approximately 200 m. The SAR data are stored in a time-growth order, which causes the images of the descending track to be left-right mirror images and the images of the ascending track to be up-down images. The naming scheme for these data is as follows: ASA_IMS_1PPIPA 20050402_095556_000000162036_00065_16151_0388.N1 ASA: Product identification, ASAR Sensor IMS: Reception and processing information of the data (imaging modes, such as WS, WSS, IM, ...) 1PPIPA: Customized number 20050402: Acquisition time of the data (UTC time) 095556: Geographic location (start, end) 000000162036: Information on the satellite orbit 00065: Product trust data 16151: Size and structure information of the product 0388 => Check code
HUI Fengming
The Antarctic and Arctic bacterial distribution data set provides distribution characteristics of bacteria in the Arctic and Antarctic. The collection period of the samples was from December 13,2005, to December 8,2006; 52 samples were obtained from 3 Arctic regions (Spitsbergen Slijeringa, Spitsbergen Vestpynten, and Alexandra Fjord_Highlands), and 171 samples were obtained from 5 Antarctic regions (the Mitchell Peninsula, Casey station main Power house, Robinsons Ridge, Herring Island, and Browning Peninsula). The soil surface samples were stored in liquid nitrogen after collection, shipped to a Sydney laboratory, and extracted using the FastPrep DNA kit. The extracted DNA samples were processed by 27F (5'-GAGTTTGATCNTGGCTCA-3' and 519R (5'-GTNTTACNGCGGCKGCTG-3') to amplify the 16S rRNA gene fragments. The amplified fragments were sequenced by the 454 method, and the raw data were analyzed by Mothur software. First, the sequences with poor sequencing quality were removed, the sequences were then sorted, and the chimera sequences were removed. The similarities between the sequences were calculated, the sequences with similarities above 97% were clustered into one OTU, and the OTU representative sequence was defined. By comparison with the Silva database, the OTU sequences with reliabilities greater than 80% were identified as level one. This data system compared the diversity of microorganisms in the eastern Antarctic with that in the Arctic and is of great significance for the study of the distributions of microorganisms in the Antarctic and Arctic.
JI Mukan
A high-resolution remote sensing image mosaic of the entire Antarctic was generated by synthesizing the 1073 images taken by American Landsat 7 during 1999 to 2003 and the medium-resolution MODIS image (taken in 2005) covering south of 82.5°southern latitude. Based on the mosaic, combined with the needs of Antarctic scientific research, Antarctica land cover was divided into six types using the combination method of computer automatic interpretation and artificial assistance. They were blue ice, fissures, bare rocks, water bodies, moraines and firns, and the areas and proportions of the above types were 225,207.29 square kilometers (1.651%), 7153.36 square kilometers (0.052%), 72,958.04 square kilometers (0.535%), 189.43 square kilometers (0.001%), 310.76 square kilometers (0.003%), and 13337392.66 square kilometers (97.758%), respectively. The map is a satellite image map of approximate true color synthesis, and the regions of various cover types are represented by different color blocks. The map mainly provides a reference for popular scientific research, geography education and science popularization.
HUI Fengming
This dataset is the spatial distribution map of the marshes in the source area of the Yellow River near the Zaling Lake-Eling Lake, covering an area of about 21,000 square kilometers. The data set is classified by the Landsat 8 image through an expert decision tree and corrected by manual visual interpretation. The spatial resolution of the image is 30m, using the WGS 1984 UTM projected coordinate system, and the data format is grid format. The image is divided into five types of land, the land type 1 is “water body”, the land type 2 is “high-cover vegetation”, the land type 3 is “naked land”, and the land type 4 is “low-cover vegetation”, and the land type 5 is For "marsh", low-coverage vegetation and high-coverage vegetation are distinguished by vegetation coverage. The threshold is 0.1 to 0.4 for low-cover vegetation and 0.4 to 1 for high-cover vegetation.
Li Xinwu, Liang Lei
The 2008 national remote sensing annual average surface temperature and freezing index is a 5 km instantaneous surface temperature data product based on MODIS Aqua/Terra four times a day by Ran Youhua et al. (2015). A new method for estimating the annual average surface temperature and freezing index has been developed. The method uses the average daily mean surface temperature observed by LST in morning and afternoon to obtain the daily mean surface temperature. The core of the method is how to recover the missing data of LST products. The method has two characteristics: (1) Spatial interpolation is carried out on the daily surface temperature variation observed by remote sensing, and the spatial continuous daily surface temperature variation obtained by interpolation is utilized, so that satellite observation data which is only once a day is applied; (2) A new time series filtering method for missing data is used, that is, the penalty least squares regression method based on discrete cosine transform. Verification shows that the accuracy of annual mean surface temperature and freezing index is only related to the accuracy of original MODIS LST, i.e. the accuracy of MODIS LST products is maintained. It can be used for frozen soil mapping and related resources and environment applications.
RAN Youhua, LI Xin
The data set provided the cloudless Fractional Snow Cover area (FSC) time-series product basing on the MODIS data and covered the Heihe River Basin from January 2010 to December 2013. They also provide the high spatial (500 m) and temporal (1 day) resolution. Firstly, the end-member were automatically extracted by the fast autonomous spectral end-member determination (N-FINDR) maximizing volume iteration algorithm. Combining N-FINDR with the orthogonal subspace projection (OSP) approach, we propose an improved end-member extraction algorithm using a maximizing, volume-based iterative method. All the 6 end-members were extracted including snow, soil, water, bare land, vegetation, and cloud, respectively. Then, the 10-day spectral library time series based on prior knowledge of Heihe basin are built for 2009. The primary data were produced using the fully constrained least squares (FCLS) linear spectral mixture analysis method by the spectral library. Finally，the cubic spline interpolation algorithm were used to the eliminate the cloud pixels completely and obtain the data set. The data are validated by the fractional snow cover derived from Landsat imagery and the results indicate that the improved algorithm can obtain the end-member information accurately, and the retrieved fractional snow cover has better accuracy than the MODIS fractional snow-cover product (MOD10A1). So the data set can provide more accurate input for the hydrology and climate model.
HUANG Xiaodong, ZHANG Ying, TANG Zhiguang, LI Xin
This data set includes the observation data of 25 water net sensor network nodes in Babao River Basin in the upper reaches of Heihe River from January 2015 to December 2015. 4cm and 20cm soil moisture / temperature is the basic observation of each node; some nodes also include 10cm soil moisture / temperature, surface infrared radiation temperature, snow depth and precipitation observation. The observation frequency is 5 minutes. The data set can be used for hydrological simulation, data assimilation and remote sensing verification. For details, please refer to "2015 data document 20160501. Docx of water net of Babao River in the upper reaches of Heihe River"
KANG Jian, LI Xin, MA Mingguo
Microwave emissivity of the surface characterization of the object to launch the ability of microwave radiation, spaceborne passive microwave emissivity can on macro, large scale integral expression of epicontinental microwave radiation is a passive microwave surface parameters in quantitative inversion experience for one of the important basic data, is also on the large scale understand epicontinental microwave radiation in a way.This data set is considered to carry on the Aqua satellite advanced microwave scanning radiometer (amsr-e) and moderate resolution imaging spectroradiometer (MODIS) synchronous observation characteristics, using the MODIS land surface temperature and atmospheric water vapor data as input, by considering the effects of atmospheric emissivity estimation model, produced a global sky conditions during the running of amsr-e sensor (June 2002 ~ October 2011) of the epicontinental multichannel bipolar microwave instantaneous emission rate.Through product low-frequency radio signal, data alignment, statistic analysis, the different emissivity characteristics of surface coverage condition, frequency dependence and correlation studies conducted confirmatory analysis, the results show that the instantaneous dynamic details of emissivity is rich, standard deviation within 0.02 month daily variation, the change of time and space, frequency dependent on and related to the understanding of the natural physical process. This data set includes amsr-e global land surface daily, daily, daily, monthly and monthly products in the whole life cycle, which can be used to carry out satellite based passive microwave remote sensing simulation, land surface model, and inversion research of land surface temperature, snow cover, atmospheric precipitation/moisture/precipitation.The projection coordinates of the data adopt the standard EASE-GRID projection, and the data storage method is binary floating point lattice (the size of the matrix is 1383*586). After the data is obtained, ENVI/IDL and other software or the corresponding program code can be read in the form of binary files. All land surface emissivity data produced are named according to the following rules: RADI_AMSRE_EM # # # # _yyymmdd_EG_V. Bin For example, file name: RADI_AMSRE_EM01_20060101_EG_V# EM##: 01 means daily, 05 means 5 days, 10 means ten days, HM means half a month, MO means a month Yyyymmdd: yyyy means year, mm means month, and dd means date V##: version number, such as 0.1, 1.0, etc., the units digit is the official version RADI: institute of remote sensing and digital earth, Chinese academy of sciences AMSRE: advanced microwave scanning radiometer
QIU Yubao
This dataset mainly includes the passive microwave brightness temperature obtained from the Scanning Multichannel Microwave Radiometer (SMMR) carried by the Nimbus-7 satellite, including 06H, 06V, 10H, 10V, 18H, 18V, 21H, 21V, 37H, 37V, a total of ten microwave channels with two transits (ascending & descending) brightness temperature per day from October 25, 1978 to August 20, 1987, where H represents horizontal polarization and V represents vertical polarization. Nimbus-7, launched in October 1978, is a solar-synchronous polar-orbiting satellite. The microwave sensor SMMR is a dual-polarization microwave radiometer that measures the brightness temperature of five frequencies (6.6GHz, 10.69GHz, 18.0GHz, 21.0GHz, 37.0GHz) on the surface. It scans the surface at a fixed incident angle of about 50.3 °, with a width of 780 km, and passes through the equator at noon 12:00 (ascending orbit) and 24:00 (descending orbit). The time resolution of SMMR is daily, but due to the wide distance between swaths, the same surface will be revisited every 5-6 days. 1. File format and naming: Each set of data is composed of remote sensing data files. The name and naming rules of each group of data files in the SMMR_Grid_China directory are as follows: SMMR-MLyyyydddA / D.subset.ccH / V (remote sensing data) Among them: SMMR stands for SMMR sensor; ML stands for multi-channel low resolution; yyyy stands for year; ddd stands for Julian Day of the year (1-365 / 366); A / D stands for ascending (A) and derailing (D ); subset represents the brightness temperature data in China; cc represents the frequency (6.6GHz, 10.69GHz, 18.0GHz, 21.0GHz, 37.0GHz); H / V represents horizontal polarization (H) and vertical polarization (V). 2. Coordinate system and projection: The projection method is an equal area secant cylindrical projection, and the double standard parallels are 30 degrees north and south. For more information about EASE-GRID, please refer to http://www.ncgia.ucsb.edu/globalgrids-book/ease_grid/. If you need to convert the EASE-Grid projection to Geographic projection, please refer to the ease2geo.prj file, the content is as follows: Input projection cylindrical units meters parameters 6371228 6371228 1 / * Enter projection type (1, 2, or 3) 0 00 00 / * Longitude of central meridian 30 00 00 / * Latitude of standard parallel Output Projection GEOGRAPHIC Spheroid KRASovsky Units dd parameters end 3. Data format: Stored as integer binary, each data occupies 2 bytes. The actual data stored in this dataset is the brightness temperature * 10. After reading the data, you need to divide by 10 to get the real brightness temperature. Spatial resolution: 25km; Time resolution: daily, from 1978 to 1987. 4. Spatial range: Longitude: 60.1 ° -140.0 ° East longitude; Latitude: 14.9 ° -55.0 ° north latitude. 5. Data reading Remote sensing image data files for each set of data can be opened in ENVI and ERDAS software.
NSIDC
This dataset mainly includes the twice a day (ascending-descending orbit) brightness temperature (K) of the space-borne microwave radiometers SSM / I and SSMIS carried by the US Defense Meteorological Satellite Program satellites (DMSP-F08, DMSP-F11, DMSP-F13, and DMSP-F17), time coverage from September 15, 1987 to December 31, 2015. The SSM/I brightness temperature of DMSP-F08, DMSP-F11 and DMSP-F13 include 7 channels: 19.35H, 19.35V, 22.24V, 37.05H, 37.05V, 85.50H and 85.50V; The SSMIS brightness temperature observation of DMSP-F17 consists of seven channels: 19.35H, 19.35V, 22.24V, 37.05H, 37.05V, 91.66H and 91.66v. Among them, DMSP-F08 satellite brightness temperature coverage time is from September 15, 1987 to December 31, 1991; DMSP-F11 satellite brightness temperature coverage time is from January 1, 1992 to December 31, 1995; The coverage time of DMSP-F13 satellite brightness temperature is from January 1, 1996 to April 29, 2009; The coverage time of DMSP-F17 satellite brightness temperature is from January 1, 2009 to December 31, 2015. 1. File format and naming: The brightness temperature is stored separately in units of years, and each directory is composed of remote sensing data files of each frequency, and the SSMIS data also contains the .TIM time information file. The data file names and their naming rules are as follows: EASE-Fnn-ML / HyyyydddA / D.subset.ccH / V (remote sensing data) EASE-Fnn-ML / HyyyydddA / D.subset.TIM (time information file) Among them: EASE stands for EASE-Grid projection method; Fnn stands for satellite number (F08, F11, F13, F17); ML / H stands for multi-channel low-resolution and multi-channel high-resolution respectively; yyyy represents the year; ddd represents Julian Day of the year (1-365 / 366); A / D stands for ascending (A) and descending (D) respectively; subset represents brightness temperature data in China; cc represents frequency (19.35GHz, 22.24 GHz, 37.05GHz, (85.50GHz, 91.66GHz); H / V stands for horizontal polarization (H) and vertical polarization (V), respectively. 2. Coordinate system and projection: The projection method of this data set is EASE-Grid, which is an equal area secant cylindrical projection, and the double standard parallels are 30 ° north and south. For more information about EASE-GRID, please refer to http://www.ncgia.ucsb.edu/globalgrids-book/ease_grid/. If you need to convert the EASE-Grid projection to Geographic projection, please refer to the ease2geo.prj file, the content is as follows: Input projection cylindrical units meters parameters 6371228 6371228 1 / * Enter projection type (1, 2, or 3) 0 00 00 / * Longitude of central meridian 30 00 00 / * Latitude of standard parallel Output Projection GEOGRAPHIC Spheroid KRASovsky Units dd parameters end 3. Data format: Stored as integer binary, Row number: 308 *166，each data occupies 2 bytes. The actual data stored in this dataset is the brightness temperature * 10. After reading the data, you need to divide by 10 to get the real brightness temperature. 4. Data resolution: Spatial resolution: 25.067525km, 12.5km (SSM / I 85GHz, SSMIS 91GHz) Time resolution: daily, from 1978 to 2015. 5. Spatial range: Longitude: 60.1 ° -140.0 ° east longitude; Latitude: 14.9 ° -55.0 ° north latitude. 6. Data reading: Remote sensing image data files in each set of data can be opened in ArcMap, ENVI and ERDAS software.
National Snow and Ice Data Center（NSIDC）
This data includes the distribution along the height of the blowing snow flux collected during the wind-blown snow event at the big winter tree pass observation station (longitude 100 degrees 14 minutes 28 seconds east and latitude 38 degrees 00 minutes 58 seconds north) on December 17, 2013 at solstice on July 9, 2014.
HUANG Ning, WANG Zhengshi
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS
0931-4967287
poles@itpcas.ac.cn
Links
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved
｜ 
No.11010502040845
Tech Support: westdc.cn
