Acceleration is an important parameter to reflect the dynamics of slope. Twenty-two acceleration sensors are arranged on the slope surface, lithological interface and inside the slope of the Xiaguiwa bedding rock model slope. An acceleration sensor is arranged on the shaking table to record the real acceleration state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the acceleration data set of the bedding rock model slope; The peak values of the acceleration data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action, and the ratio of the peak acceleration on the slope to the peak acceleration on the table can reflect whether the slope is enhanced or attenuated at each location under the seismic action.
GUO Mingzhu
Displacement is an important parameter to reflect the dynamics of slopes. Six acceleration sensors on the interface of weak and hard lithology and three acceleration sensors on the slope surface of the Xiaguiwa bedding rock model slope were selected as the study samples. The acceleration data of the study samples were processed by filtering, noise reduction and screening, and then quadratic integration and zero line callback were performed to calculate the peak displacement under the amplitude of 0.3g~0.8g Maoxian wave, and the displacement data set of the shaking table model test was obtained for the bedding rock model slope; the two sets of data on the weak and hard lithology interface can reflect the influence of the weak rock layer on the displacement of the bedding rock slope under the seismic action; The two sets of data on the interface of weak and hard lithology can reflect the influence of weak rock layer on the displacement of the bedding rock slope under the seismic effect; The set of data on the slope table can reflect the displacement relationship of various positions on the slope table;
GUO Mingzhu
Velocity is an important parameter to reflect the dynamics of slope. A velocity sensors are arranged on the top of slope of the Xiaguiwa bedding rock model slope. A velocity sensor is arranged on the shaking table to record the real velocity state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the velocity data set of the bedding rock model slope; The peak values of the velocity data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action. The ratio of the peak velocity on the slope to the peak velocity on the table reflects the enhancement level of the velocity response of the slope top under seismic action.
GUO Mingzhu
A total of two types of seismic waves are used as input in the test, one type is sinel wave; the other type is natural wave, and the natural wave is adopted from Wenchuan Maoxian wave. The sine wave amplitude and frequency are unique, so it can be used to study the influence of ground motion parameters on the dynamic response of slopes. By comparing the dynamic response of slopes under the action of sine waves with different frequencies and amplitudes, the influence of the input seismic wave parameters on the dynamic response of rock slopes is investigated; the natural waves are selected from the bedrock seismic waves recorded at the Maoxian station. The seismic wave input is loaded in a step-by-step manner, firstly loading the sine wave with low amplitude, and then loading the Wenchuan Maoxian wave with 0.1g increase, and after each loading, white noise is carried out to analyze the natural characteristics of the slope. After each loading was completed, 10 minutes were spent to take pictures and observe the damage of the slope.
GUO Mingzhu
Based on the distribution locations of the Qinghai toad-headed lizard (Phrynocephalus vlangalii) collected by field investigation and literature investigation, combined with five climate factors from WorldClim database, the current (1960-1990) and future (2061-2080) climate data were input into the trained species distribution model to predict the current and future suitable habitats. The prediction results shows that the lizard will lose a lot of original habitats under the climate change, and the protection measures for the lizard species should focus on the eastern margin of Qinghai-Tibet Plateau, the northern and eastern parts of Qaidam Basin. The model also predicts that after the climate change, new suitable habitats will appear in areas that were not suitable for the Qinghai toad-headed lizard. However, due to the very limited diffusion ability of reptiles (the maximum annual diffusion distance recorded in the literature is less than 500m), the newly emerging suitable habitats may not be used by the Qinghai toad-headed lizard. Meanwhile, based on the physiological, life history, behavior and morphological data of three altitudinal populations of the Qinghai toad-headed lizard collected by field work, and combined with microclimate data, the physiological consequences of climate change on the Qinghai toad-headed lizard in the current suitable distribution area were predicted by using the mechanism niche model. The prediction results of the model show that, whether in the SSP245 or SSP585 climate change scenarios, the activity time of the lizard will increase in most areas (> 93%) of the current suitable distribution area, and the thermal safety threshold will decrease in all places of the current suitable distribution area. The increase of activity time of high-altitude populations is less than that of low-altitude populations, but the decrease of thermal safety threshold is greater than that of low-altitude populations. The results reveal that climate change may have a greater impact on lizard populations in high altitude areas.
ZENG Zhigao
Displacement is an important parameter reflecting the characteristics of slope dynamics. The displacement data set is obtained by arranging one displacement measurement point at each of the toe, middle, shoulder and top of the counter-bedding model slope, collecting displacement data every one minute, correcting the collected data and deleting the abnormal data at the end of each point, and obtaining the displacement data set of the counter-bending rock slope shaking table model test; The displacement data set of the model slope under the same working condition can reflect the relationship between the displacement of the toe, middle, shoulder and top of the slope under such seismic action, and the displacement data set of the model slope under different working conditions can reflect the damage mechanism of the counter-beddomg rock slope with the accumulation of seismic action.
GUO Mingzhu
The Central Asia West Asia economic corridor is dominated by deserts, mountains and plateaus, with an average altitude of about 1000m. The climate is extremely arid, the desert distribution area is large, the ecology is fragile, the dry and hot season lasts for a long time, up to 7 months, and the annual average rainfall is only 150mm at most. There are great differences in natural environment and complex geological conditions in the area. Under the compound driving action of regional differentiated structure, earthquake, meteorology, hydrology and ecology, debris flow and landslide are widely distributed in the corridor. Based on remote sensing images, the landslide and debris flow disasters in China Central Asia West Asia economic corridor are interpreted. Statistics show that 303 landslides and 2159 debris flow disasters are developed in China Central Asia West Asia economic corridor. Debris flows mainly include freeze-thaw debris flow, ice water debris flow and rainstorm debris flow.
ZOU Qiang
Velocity is an important parameter to reflect the dynamics of slope. A velocity sensors are arranged on the top of slope of the Xuelongnang counter-bedding rock model slope. A velocity sensor is arranged on the shaking table to record the real velocity state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the velocity data set of the counter-bedding rock model slope; The peak values of the velocity data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action. The ratio of the peak velocity on the slope to the peak velocity on the table reflects the enhancement level of the velocity response of the slope top under seismic action.
GUO Mingzhu
The data includes: zooplankton species list; zooplankton density; microscopy; high-throughput sequencing; complete data; constructing an original data set for lakes on the Qinghai-Tibet Plateau. Zooplankton is an indispensable link in lake water ecological investigation, and it is a link between the system The location of the food web is an important carrier for the material circulation and energy flow of the food web. The systematic investigation and study of the composition and biodiversity of the zooplankton in the lakes on the Qinghai-Tibet Plateau is particularly important for understanding the stability and resilience of the lake ecosystem on the Qinghai-Tibet Plateau. In addition, Zooplankton are very sensitive to environmental changes, and changes in their structure and functional groups can indicate the intensity and magnitude of environmental pressure.
LI Yun
The data set is a numerical simulation data set based on CESM2.1.3 mode. The data set is global multi scenario monthly climate data. The spatial resolution is f19_ G17 atmosphere/land is 1.9x2.5 degrees, from January 2015 to December 2010, and the data is in NETCDF format. The data set includes historical data from 1850-2014 (referred to as Hist for short) and SSP scenarios (SSP126, SSP245, SSP370, SSP585). Each scenario includes three sets of climate data (default emission data CMIP6 (referred to as CMIP6 for short), China's carbon neutral CNCN (referred to as CNCN for short) CO2 emissions, and China's CH4 and N2O changes with CNCN, which are further used to drive the CESM (referred to as CNCNext for short)), The data set contains a geospatial range of - 90 ° N – 90 ° N and - 180 ° E – 180 ° E.
LI Longhui
Through the investigation of tourist spots, tourist routes and tourist areas at different levels, form photos and video data of tourism resources, tourism services and tourism facilities of scenic spots, scenic spots, corridors and important tourism transportation nodes, tourism villages and tourism towns, record the tourism development status, find problems in tourism development, and form corresponding ideas for the construction of world tourism destinations; The data sources are UAV, tachograph and camera, mobile phone and GPS, and are divided into different folders according to scenic spots and data categories; The data has been checked for many times to ensure its authenticity; This data can provide a traceable basis for the construction of world tourism destinations on the Qinghai Tibet Plateau.
SHI Shanshan
During the development of debris flow monitoring microwave radar prototype, a series of demonstration applications were carried out in tianmogou, Bomi County, Nyingchi Prefecture, Tibet Autonomous Region. The test alarm data and application alarm data information in the demonstration application were reported and recorded through the multi-mode communication unit. This record gives the report records during the test and application. The data is the original log records exported from the background database of the control center, which are listed in Excel table according to the display of the control center, so as to improve its readability. Because the debris flow microwave radar is a result oriented monitoring, that is, its monitoring results directly give whether there is debris flow, rather than the relevant conditions of debris flow. Therefore, this data is mainly used to determine the target recognition ability in the research and development process of debris flow monitoring microwave radar. The data can be used as a reference for the development of debris flow microwave radar.
DUAN Jiangnian
This dataset is about the historical yield data (yield per unit area and sown area) of the main crops (hull-less barley and wheat) on Tibetan Plateau between years 1988-2018, covering some prefectures and cities located in Tibetan Plateau. The data are obtained from Tibet Statistical Yearbook, Qinghai Statistical Yearbook, Sichuan Statistical Yearbook, Gansu Statistical Yearbook, Yunnan Statistical Yearbook and the aba Tibetan and Qiang Autonomous Prefecture and Ganzi Tibetan Autonomous Prefecture Agriculture and Animal Husbandry Bureau with the same accuracy. Hull-less barley and wheat are the main crops on the Tibetan Plateau. This data set is of great value for the study of food security and agricultural production on Tibetan Plateau.
PAN Zhifen
(1) Data content: the annual mean Northern Annular mode index and the Northern Annular mode index from 1500 to 2000; (2) Data source and processing method: this data is independently produced by the author. It is based on PAGES2k data set and reconstructed by machine learning model (random forest, extreme tree, Light GBM and catboost). (3) Data quality description: the data set has high consistency with multiple instrumental data during the observed period, and the reconstruction is better. The data can be used to study the change and mechanism of the main atmospheric circulation in the northern and southern hemispheres on multiple time scales (interannual, interdecadal and multidecadal).
YANG Jiao
(1) Data content: This data set is based on the Xiaguiwa landslide in the Sanjiang basin of the Qinghai-Tibet Plateau, reconstructing the bedding slope of the Xiaguiwa landslide; the bedding slope of the Xiaguiwa landslide is used as a reference for shaking table model tests, which is used to design the shaking table model test model and sensor layout diagram for the bedding rock slope, with a weak rock layer in the model slope, and the sensors deployed are acceleration sensors and velocity sensors, and the measured (2) Data source and processing method: The data set is drawn by Guo Mingzhu of Beijing University of Technology using CAD software. (3) The data provide reference for the subsequent shaking table model test implementation.
GUO Mingzhu
This data is mainly the data collection of mechanical properties of anti slide pile structure, including bearing capacity, displacement, strain of reinforcement and steel strand, and monitoring of prestress, which is used to analyze various performance indexes of bending and shear resistance of the structure and optimize the structural design; This experiment is mainly completed by scaling the anti slide pile components and loading them with MTS machine for four point bending. The data are collected by static strain acquisition instrument based on force sensor, displacement gauge, strain gauge, optical fiber monitoring and anchor cable dynamometer. Due to the effect of end iron block on the dispersion of prestress transmission, The change of prestress in the whole process of loading has not been completely monitored, and the other data have been analyzed and processed to obtain the corresponding law. The corresponding laws can be obtained by sorting and analyzing the data, which provides some design basis for the application of this kind of prestressed steel strand anti slide pile.
JIANG Qinghui
(1) Data content: This data set is based on the Xuelongnang landslide in the Sanjiang basin of the Qinghai-Tibet Plateau, and reconstructs the counter-bedding slope before the slide; the counter-bedding slope before the slide is used as a reference for the shaking table model test, which is used to design the shaking table model test model and the sensor layout diagram for the counter-bedding rock slope, and a special joint is set in the model slope, and the deployed sensors are the acceleration sensors and the velocity sensors. (2) Data source and processing method: The data set is drawn by Guo Mingzhu of Beijing University of Technology using CAD software. (3) The data provide reference for the subsequent shaking table model test implementation.
GUO Mingzhu
Two types of seismic waves are used as dynamic inputs, one is synthetic waves, including sine waves and synthetic waves with different transcendence probabilities; the other is natural waves, selecting Wenchuan Wolong waves and Maoxian waves. The sine wave amplitude and frequency are unique, so they can be used to study the influence of ground motion parameters on the dynamic response of slopes; the natural waves are selected from the soil layer waves recorded at Wolong station and bedrock seismic waves recorded at Maoxian station during the Wenchuan earthquake, aiming to investigate the influence of different types of seismic wave inputs on the dynamic response of rock slopes by comparing the dynamic response law of slopes under the action of two types of seismic waves. White noise was performed after each loading to analyze the natural characteristics of the slope. A 10-minute stay after each loading was used to take pictures and observe the damage of the slope.
GUO Mingzhu
The triple pole aerosol type data product is an aerosol type result obtained through a series of data pre-processing, quality control, statistical analysis and comparative analysis processes by comprehensively using MEERA 2 assimilation data and active satellite CALIPSO products. The key of the aerosol type fusion algorithm is to judge the aerosol type of CALIPSO. During the data fusion of aerosol type, the final aerosol type data (12 types in total) and quality control results in the three polar regions are obtained according to the types and quality control of CALIPSO aerosol types and referring to MERRA 2 aerosol types. The data product fully considers the vertical and spatial distribution of aerosols, and has a high spatial resolution (0.625 ° × 0.5 °) and time resolution (month).
ZHAO Chuanfeng
This data comes from a random questionnaire survey conducted in the one-river-two-river region of Tibet, southeastern Tibet, and Hengduan mountainous area of eastern Sichuan and Tibet during July-August 2020. The data set mainly includes agricultural waste utilization data (straw utilization and livestock and poultry wastes). Utilization methods), straw utilization methods mainly include returning to the field, fuel, feed and compost, and livestock and poultry manure utilization methods mainly include fuel and fertilizer. The interviewees were mainly adults who were familiar with the family situation. In some villages, the output was calculated in small groups. The questionnaire design is based on the principles of scientificity, applicability, feasibility, typicality and specificity, and the "Household Questionnaire" is designed for the above areas. In order to ensure the reliability and validity of the questionnaire design content, the questionnaire was pre-investigated before the formal investigation, and there were problems in further modifying and improving the questionnaire. Before the official start of the questionnaire, the investigators were given the explanation of the content of the questionnaire and the training of investigation skills.
SONG Dagang SONG Dagang
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS 0931-4967287 poles@itpcas.ac.cnLinks
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved | No.11010502040845
Tech Support: westdc.cn