The 1 km / 5-day FVC data set of Heihe River basin provides the 5-day FVC synthesis results in 2015. The data uses the data of Terra / MODIS, Aqua / MODIS, and domestic satellites fy3a / MERSI and fy3b / MERSI to build a multi-source remote sensing data set with a spatial resolution of 1 km and a time resolution of 5 days. The whole country is divided into different vegetation divisions and land types, and the conversion coefficient of NDVI and FVC is calculated respectively. The conversion coefficient look-up table and 1km / 5-day synthetic NDVI product production area 1km / 5-day synthetic FVC product are used. In the Heihe River Basin, 1 km / 5-day synthetic FVC products can directly obtain vegetation coverage ratio through high-resolution data to reduce the impact of low-resolution data heterogeneity; in addition, select the typical period of vegetation growth and change, obtain the corresponding growth curve parameters of each pixel by fitting the vegetation index of each pixel time series; and then cooperate with land use map and vegetation classification map, To find the representative uniform pixel of the region to train the conversion coefficient of vegetation index. Compared with the results of high-resolution aster reference FVC in Heihe River Basin, the first step is to aggregate the aster products in Heihe River basin to 1km scale by combining the measured ground data and using the scale up method, and to obtain the aster aggregate FVC data, which is based on spot vegetation remote sensing data released by geoland 2 project (geov1 for short) The results show that the results of geov1 are higher than those of ASTER image combined with ground measurement, and the results of 1 km / 5-day synthetic FVC products in Heihe River Basin are between the two, and the results of 1 km / 5-day synthetic FVC products in Heihe River Basin in the experimental area are better than those of geov1 products. In a word, the comprehensive utilization of multi-source remote sensing data to improve the estimation accuracy and time resolution of FVC parameter products can better serve the application of remote sensing data products.
MU Xihan, RUAN Gaiyan, ZHONG Bo, LIU Qinhuo
The 30 m / month vegetation index (NDVI / EVI) data set of Heihe River basin provides the monthly NDVI / EVI composite products from 2011 to 2014. This data uses the characteristics of HJ / CCD data of China's domestic satellite, which has both high time resolution (2 days after Networking) and spatial resolution (30 m), to construct multi angle observation data set. The average composite MC method is used as the main algorithm for synthesis, and the backup algorithm uses VI method. At the same time, the main observation angles of the multi-source data set are used as part of the quality descriptor to help analyze the angle effect of the composite vegetation index residue. The remote sensing data acquired every month can provide more angles and more observations than the single day sensor data, but the quality of multi-phase and multi angle observation data is uneven due to the difference of on orbit operation time and performance of the sensor. Therefore, in order to effectively use the multi-temporal and multi angle observation data, before using the multi-source data set to synthesize the vegetation index, the algorithm designs the data quality inspection of the multi-source data set, removing the observation with large error and inconsistent observation. The verification results in the middle reaches of Heihe River show that the NDVI / EVI composite results of the combined multi temporal and multi angle observation data are in good agreement with the ground measured data (R2 = 0.89, RMSE = 0.092). In a word, the 30 m / month NDVI / EVI data set of Heihe River Basin comprehensively uses multi temporal and multi angle observation data to improve the estimation accuracy and time resolution of parameter products, so as to realize the stable standardized products from scratch and better serve the application of remote sensing data products.
LI Jing, LIU Qinhuo, ZHONG Bo, WU Junjun, WU Shanlong
The 1km / 5day vegetation index (NDVI / EVI) data set of Heihe River basin provides a 5-day resolution NDVI / EVI composite product from 2011 to 2014. The data uses the characteristics of FY-3 data, a domestic satellite, with high time resolution (1 day) and spatial resolution (1km), to construct a multi angle observation data set, which is the basis for analyzing multi-source data sets and existing composite vegetation index products and algorithms On the basis of this, an algorithm system of global composite vegetation index production based on multi-source data set is proposed. The vegetation index synthesis algorithm of MODIS is basically adopted, that is, the algorithm system of BRDF angle normalization method, cv-mvc method and MVC method based on the semi empirical walthal model. Using the algorithm system, the composite vegetation index is calculated for the first level data and the second level data, and the quality is identified. Multi-source data sets can provide more angles and more observations than a single sensor in a limited time. However, due to the difference of on orbit running time and performance of sensors, the observation quality of multi-source data sets is uneven. Therefore, in order to make more effective use of multi-source data sets, the algorithm system first classifies the quality of multi-source data sets, which can be divided into primary data, secondary data and tertiary data according to the observation rationality. The third level data are observations polluted by thin clouds and are not used for calculation. In the middle reaches of Heihe River, the verification results of farmland and forest areas show that the NDVI / EVI composite results of combined multi temporal and multi angle observation data are in good agreement with the ground measured data (RMSE = 0.105). Compared with the time series of MODIS mod13a2 product, it fully shows that when the time resolution is increased from 16 days to 5 days, a stable and high-precision vegetation index can describe the details of vegetation growth in detail. In a word, the NDVI / EVI data set of Heihe River Basin, which is 1km / 5day, comprehensively uses multi temporal and multi angle observation data to improve the estimation accuracy and time resolution of parameter products and better serves the application of remote sensing data products.
LI Jing, LIU Qinhuo, ZHONG Bo, YANG Aixia
The datasets of “Land Cover Map of Heihe River Basin” provide monthly land cover classification data in 2012-2013. The HJ-1/CCD data with both high spatial resolution (30 m) and high temporal (2 days) frequency was used to construct the time series data. The NDVI curves from the time series HJ-1/CCD data can depict the variation of typical land surface. Different land use type has different NDVI curve. Rules were set to extract every land use type information. The datasets of “Land Cover Map of Heihe River Basin” hold the traditional land use types including water bodies, urban and built-up, croplands, evergreen coniferous forests, deciduous broadleaf forests and so on. Crop type classification (including maize, spring wheat, highland barely, rape and so on), snow and ice and glaciers information updates, make the datasets more detailed. Compared with previous land cover map and other products, the classification result of the datasets is visually bette. Especially in middle stream, the accuracy of crop classification is quite high compared with the data from the ground campaign. The accuracy of land cover map of the datasets in 2012 was evaluated using very high spatial resolution remote sensing data within Google Earth and data from campaign, and the overall accuracy can be as high as 92.19%. In a word, the datasets of “Land Cover Map of Heihe River Basin” is not only high in overall accuracy, but also more detailed in crop fine classification. Furthermore, it updated some new classes like glaciers and snow. The datasets of “Land Cover Map of Heihe River Basin” are consequently the classification datasets with the highest accuracy and most detailed information up to now.
ZHONG Bo, YANG Aixia
The 30 m / month synthetic photosynthetic effective radiation absorption ratio (fAPAR) data set of Heihe River basin provides the monthly Lai synthetic products from 2011 to 2014. This data uses the characteristics of HJ / CCD data of China's domestic satellite, which has both high time resolution (2 days after Networking) and spatial resolution (30 m), to construct multi angle observation data set, considering different vegetation types, based on land cover classification map, combined with 30 m /Monthly synthetic leaf area index (LAI) products were produced by fapar-p model based on energy conservation. Based on the principle of energy conservation, the algorithm considers the multiple bounces between vegetation, soil and vegetation, as well as the influence of various factors such as sky scattered light. By analyzing the process of the interaction between photons and canopy, from the point of view that the movement of photons in the canopy is equal to the probability of re collision when multiple scattering occurs, a uniform and continuous vegetation fAPAR model is established. In addition, the effects of various factors on the fAPAR model were analyzed, including soil and leaf reflectance, aggregation index, and G function. The algorithm is highly dynamic, and can get better results for different soil background, vegetation type, radiation conditions, light and observation geometry, weather conditions. Compared with the data of corn canopy par measurement in Yingke irrigation area of Zhangye City, Gansu Province on July 8, 2012, the 30 m / month fAPAR product has a high consistency with the ground observation data, and the error with the observation value is less than 5%. In a word, the 30 m / month synthetic photosynthetic effective radiation absorption ratio (fAPAR) data set of Heihe River Basin comprehensively uses the multi temporal and multi angle observation data to improve the estimation accuracy and time resolution of parameter products, and better serves the application of remote sensing data products.
FAN Wenjie, LIU Qinhuo, ZHONG Bo, WU Junjun, WU Shanlong
The 1 km / 5-day FVC data set of Heihe River basin provides the 5-day FVC synthesis results from 2011 to 2014. The data uses the data of Terra / MODIS, Aqua / MODIS, and domestic satellites fy3a / MERSI and fy3b / MERSI to build a multi-source remote sensing data set with a spatial resolution of 1 km and a time resolution of 5 days. The whole country is divided into different vegetation divisions and land types, and the conversion coefficient of NDVI and FVC is calculated respectively. The conversion coefficient look-up table and 1km / 5-day synthetic NDVI product production area 1km / 5-day synthetic FVC product are used. In the Heihe River Basin, 1 km / 5-day synthetic FVC products can directly obtain vegetation coverage ratio through high-resolution data to reduce the impact of low-resolution data heterogeneity; in addition, select the typical period of vegetation growth and change, obtain the corresponding growth curve parameters of each pixel by fitting the vegetation index of each pixel time series; and then cooperate with land use map and vegetation classification map, To find the representative uniform pixel of the region to train the conversion coefficient of vegetation index. Compared with the results of high-resolution aster reference FVC in Heihe River Basin, the first step is to aggregate the aster products in Heihe River basin to 1km scale by combining the measured ground data and using the scale up method, and to obtain the aster aggregate FVC data, which is based on spot vegetation remote sensing data released by geoland 2 project (geov1 for short) The results show that the results of geov1 are higher than those of ASTER image combined with ground measurement, and the results of 1 km / 5-day synthetic FVC products in Heihe River Basin are between the two, and the results of 1 km / 5-day synthetic FVC products in Heihe River Basin in the experimental area are better than those of geov1 products. In a word, the comprehensive utilization of multi-source remote sensing data to improve the estimation accuracy and time resolution of FVC parameter products can better serve the application of remote sensing data products.
MU Xihan, RUAN Gaiyan, ZHONG Bo, LIU Qinhuo
30m month compositing Fraction Vegetation Cover (FVC) data set of Heihe River Basin provides the results of monthly FVC synthesis in 2011-2014. The data constructs multi-angle observation data sets by using China's domestic satellite HJ/CCD data with high temporal resolution (2 days after networking) and spatial resolution (30m) , and divides the country into different vegetation divisions and land types. The conversion coefficients of NDVI and FVC are calculated respectively, and use the calculated conversion coefficient lookup table and monthly compositing NDVI to produce the regional monthly compositing FVC products. The 30m month compositing FVC product in the Heihe River Basin can directly obtain the vegetation coverage ratio through high-resolution data, and mitigate the influence of low-resolution data heterogeneity; in addition, selecting the typical period of vegetation growth change, by fitting the vegetation index of each pixel time series to obtain the growth curve parameters that correspond to each pixel; then the land use map and the vegetation classification map are combined to find the representative uniform pixels of the region for training the conversion coefficients of the vegetation index. Compared with the ASTER reference FVC results, the 30m/month compositing FVC product in the Heihe River Basin is slightly higher than the ASTER reference result, but the overall deviation is not large, and the maximum value of the root mean square error (RMSE) of the product and the reference value is less than 0.175. In addition, compared with the ground survey data of Huailai experimental site in Hebei Province, the 30 m/month compositing FVC products generally reflect the seasonal variation of vegetation growth, and the deviation from the ground survey data is less than 0.1. At the same time, compared with the ground measurements of vegetation coverage in many watersheds in Northeast, North China and Southeast China, the overall error between the compositing FVC products and the ground measurements is less than 0.2. In all, the 30m/month compositing FVC data set of Heihe River Basin comprehensively utilizes multi-temporal and multi-angle remote sensing data to improve the estimation accuracy and time resolution of FVC parameter products, so as to better serve the application of remote sensing data products.
MU Xihan, RUAN Gaiyan, ZHONG Bo, WU Junjun, WU Shanlong, LIU Qinhuo
The 30 m / month synthetic leaf area index (LAI) data set of Heihe River basin provides the monthly Lai synthetic products from 2011 to 2014. This data uses the domestic satellite HJ / CCD data with high time resolution (2 days after Networking) and spatial resolution (30 m) to construct the multi angle observation data set. Considering the impact of surface classification and terrain fluctuation, the algorithm is selected according to the characteristics of different vegetation types Choosing a suitable parameterization scheme of integrated model, inversion Lai based on look-up table method. The remote sensing data acquired every month can provide more angles and more observations than the single day sensor data, but the quality of multi-phase and multi angle observation data is uneven due to the difference of on orbit operation time and performance of the sensor. Therefore, in order to effectively use multi temporal and multi angle observation data, a data quality inspection scheme is designed. Using the Lai ground observation data of 9 forest quadrats, 20 farmland quadrats and 14 savanna quadrats from dayokou area in the upper reaches of Heihe River and Yingke and Linze areas in the middle reaches to verify the Lai in July, the inversion results are in good agreement with the measurement results, and the average error is less than 1; in addition, the Lai inversion results of the combined multi temporal and multi angle observation data are in good agreement with the ground measurement data （R2=0.9，RMSE=0.42）。 In a word, the 30 m / month synthetic leaf area index (LAI) data set of Heihe River Basin comprehensively uses multi temporal and multi angle observation data to improve the estimation accuracy and time resolution of parameter products, so as to better serve the application of remote sensing data products.
LIU Qinhuo, FAN Wenjie, ZHONG Bo
The vegetation phenology data set of Heihe River basin provides remote sensing phenology products from 2012 to 2015. The spatial resolution is 1km and the projection type is sinusoidal. MODIS Lai product mod15a2 is used as the phenological remote sensing monitoring data source, and MODIS land cover classification product mcd12q1 is used as the auxiliary data set for extraction. The product algorithm first uses the time series data reconstruction method (bise method) to control the data quality of the input time series; then uses the main algorithm (logistic function fitting method) and the backup algorithm (piecewise linear fitting method) to extract the vegetation phenological parameters, realizes the complementary calculation method, guarantees the accuracy and improves the inversion rate. The algorithm can extract up to three growth cycles in a year, each growth cycle contains six data sets, including the start point of vegetation growth, the start point of growth peak, the end point of growth peak, the end point of growth, the fastest growth and the fastest decline. At the same time, it records the growth cycle type, growth season length, quality identification, etc., a total of 25 data sets. The phenology product reduces the missing rate of inversion, improves the stability of the product, and the data set is relatively reliable with rich information.
LI Jing
This data is the ASTER fractional vegetation cover in a growth cycle observed in the Yingke Oasis Crop land. Data observations began on May 30, 2012 and ended on September 12. Original data: 1.15m resolution L1B reflectivity product of ASTER 2.Vegetation coverage data set of the artificial oasis experimental area in the middle reaches Data processing: 1.Preprocessing of ASTER reflectance products to obtain ASTER NDVI; 2.Through the NDVI-FVC nonlinear transformation form, the ASTER NDVI and the ground measured FVC are used to obtain the conversion coefficients of NDVI to FVC at different ASTER scales. 3.Apply this coefficient to the ASTER image to obtain a vegetation coverage of 15m resolution; 4.Aggregate 15m resolution ASTER FVC to get 1km ASTER FVC product
HUANG Shuai, MA Mingguo
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jun. 1, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire CCD, MIR and TIR band data. The simultaneous ground data included: (1) The radiative temperature of maize, wheat and the bare land in Yingke oasis maize field and Huazhaizi desert No. 1 plot by ThermaCAM SC2000 (1.2m above the ground, FOV = 24°×18°). The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived in Excel format). (2) The radiative temperature by the automatic thermometer (FOV: 10°; emissivity: 1.0; from Institute of Remote Sensing Applications), observing straight downwards at intervals of 1s in Yingke oasis maize field. Raw data, blackbody calibrated data and processed data were all archived in Excel format. (3) FPAR (Fraction of Photosynthetically Active Radiation) of maize and wheat by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in Excel format. (4) The reflectance spectra by ASD in Yingke oasis maize field (350-2500nm , from BNU, the vertical canopy observation and the transect observation), and Huazhaizi desert No. 1 plot (350-2500nm , from Cold and Arid Regions Environmental and Engineering Research Institute, CAS, the NE-SW diagonal observation at intervals of 30m). The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (5) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (6) The radiative temperature by the handheld radiometer in Yingke oasis maize field (from BNU, the vertical canopy observation, the transect observation and the diagonal observation), Yingke oasis wheat field (only for the transect temperature), and Huazhaizi desert No. 1 plot (the NE-SW diagonal observation). Besides, the maize radiative temperature and the physical temperature were also measured both by the handheld radiometer and the probe thermometer in the maize plot of 30m near the resort. The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (7) Atmospheric parameters on the playroom roof at the resort by CE318 (produced by CIMEL in France). The underlying surface was mainly composed of crops and the forest (1526m high). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (8) Narrow channel emissivity of the bare land and vegetation by the W-shaped determinator in Huazhaizi desert No. 1 plot. Four circumstances should be considered for emissivity, with the lid plus the au-plating board, the au-plating board only, the lid only and without both. Data were archived in Word.
CHEN Ling, HE Tao, REN Huazhong, REN Zhixing, YAN Guangkuo, ZHANG Wuming, XU Zhen, LI Xin, GE Yingchun, SHU Lele, JIANG Xi, HUANG Chunlin, GUANG Jie, LI Li, LIU Sihan, WANG Ying, XIN Xiaozhou, ZHANG Yang, ZHOU Chunyan, LIU Xiaocheng, TAO Xin, CHEN Shaohui, LIANG Wenguang, LI Xiaoyu, CHENG Zhanhui, Liu Liangyun, YANG Tianfu
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on May 30, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire CCD, MIR and TIR band data. The simultaneous ground data included: (1) The radiative temperature by the handheld radiometer (BNU) in Yingke oasis maize field and Huazhaizi desert maize field (the vertical canopy observation and the transect observation for both fields), and Huazhaizi desert No. 2 plot (the diagonal observation). The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (2) The component temperature of maize and wheat by the handheld radiometer in Yingke oasis maize field, Yingke wheat field and Huazhaizi desert maize field. For maize, the component temperature included the vertical canopy temperature, the bare land temperature and the plastic film temperature; for the wheat, it included the vertical canopy temperature, the half height temperature, the lower part temperature and the bare land temperature. The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (3) The radiative temperature of maize, wheat and the bare land in Yingke oasis maize field by ThermaCAM SC2000 (1.2m above the ground, FOV = 24°×18°), The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived in Excel format). (4) The radiative temperature and the canopy multi-angle radiative temperature by the fixed automatic thermometer (FOV: 10°; emissivity: 1.0), observing straight downwards at intervals of 1s in Yingke oasis maize field (2 instruments for maize canopy), Huazhaizi desert maize field (only one for maize canopy) and Huazhaizi desert No. 2 plot (two for reaumuria soongorica canopy and the bare land). The thermal infrared remote sensing calibration was carried out in the resort plot. Raw data, blackbody calibrated data and processed data were all archived in Excel format. (5) Coverage fraction of maize and wheat by the self-made instrument and the camera (2.5m-3.5m above the ground) in Yingke oasis maize field. Based on the length of the measuring tape and the bamboo pole, the size of the photo can be decided. GPS date were also collected and the technology LAB was applied to retrieve the coverage of the green vegetation. Besides, such related information as the surrounding environment was also recorded. Data included the primarily measured image and final fraction of vegetation coverage. (6) Reflectance spectra of Yingke oasis maize field (350-2500nm, from Institute of Remote Sensing Applications) and resort calibration site (350-2500nm, from Beijing Univeristy) by ASD (Analytical Sepctral Devices); BRDF by the self-made observation platform. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (7) Atmospheric parameters at the resort calibration site by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (8) Soil moisture (0-40cm) by the cutting ring, the soil temperature by the thermocouple thermometer, roughness by the self-made roughness board and the camera in Huazhaizi desert No. 1 plot. Sample points were selected every 30m along the diagonals. Data were all archived in Excel format. (9) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (10) FPAR (Fraction of Photosynthetically Active Radiation) by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in Word. LAI in Yingke oasis maize field. The maximum leaf length and width of each maize and wheat were measured. Data were archived in Excel format of May 31.
CHAI Yuan, CHEN Ling, HE Tao, KANG Guoting, QIAN Yonggang, REN Huazhong, REN Zhixing, WANG Haoxing, ZHANG Wuming, ZOU Jie, GE Yingchun, SHU Lele, WANG Jianhua, XU Zhen, GUANG Jie, LIU Sihan, XIN Xiaozhou, ZHANG Yang, ZHOU Chunyan, LIU Xiaocheng, TAO Xin, LIANG Wenguang, WANG Dacheng, LI Xiaoyu, CHENG Zhanhui, YANG Tianfu, HUANG Bo, LI Shihua, LUO Zhen
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jul. 11, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire CCD, MIR and TIR band data. The simultaneous ground data included: (1) Atmospheric parameters in Huazhaizi desert No. 2 plot from CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for details. Processed data (after retrieval of the raw data) in Excel format are on optical depth, Rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (2) Radiative temperature of maize, wheat and the bare land (in Yingke oasis maize field), vegetation and the bare land (Huazhaizi desert No. 2 plot) by the thermal cameras at a height of 1.2m above the ground. Optical photos of the scene were also taken. Raw data (read by ThermaCAM Researcher 2001) was archived in IMG format and radiative files are stored in Excel format. . (3) Photosynthesis by LI6400 in Yingke oasis maize field, carried out according to WATER specifications. Raw data were archived in the user-defined format (by notepat.exe) and processed data were in Excel format. (4) Ground object reflectance spectra in Yingke oasis maize field, Huazhaizi maize field, Huazhaizi desert No. 1 and 2 plots, by ASD FieldSpec (350～2500 nm) from Institute of Remote Sensing Applications (IRSA), CAS. Raw data were binary files direct from ASD (by ViewSpecPro), which were recorded daily in detail, and pre-processed data on reflectance were in .txt format. (5) The radiative temperature in Huazhaizi desert No. 2 plot by the handheld infrared thermometer (BNU and IRSA). Raw data, blackbody calibrated data and processed data (in Excel format) were all archived. (6) FPAR (Fraction of Photosynthetically Active Radiation) by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in Excel format. (7) The radiative temperature of the maize canopy by the automatic thermometer (FOV: 10°; emissivity: 0.95) mearsued at nadir with an time intervals of 1s in Huazhaizi desert maize field. Raw data, blackbody calibrated data and processed data were all archived as Excel files. (8) Maize albedo from two shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format.
REN Huazhong, WANG Tianxing, YAN Guangkuo, LI Li, LI Hua, LIU Sihan, XIA Chuanfu, XIN Xiaozhou, ZHOU Chunyan, ZHOU Mengwei, YANG Guijun, LI Xiaoyu, CHENG Zhanhui, Liu Liangyun
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jun. 29, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire VNIR, MIR and TIR band data. The simultaneous ground data included: (1) Atmospheric parameters in Huazhaizi desert No. 2 plot from CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (2) Emissivity of maize and wheat in the Yingke oasis by portable 102F (2.0~25.0um) from BNU. Warm blackbody, cold blackbody, the target and the au-plating board of known emissivity. Raw data of those four measurements were archived in *.WBX, *.CBX, *.SAX and *.CBX Besides, the spectral radiance and emissivity calculated by 102F were archived in *.RAX and *.EMX, respectively. Meanwhile, the final spectral emissivity of targets were also calculated by TES (ISSTES). (3) LAI of mazie and wheat in Yingke oasis maize field. The maximum leaf length and width of leaves were measured. Data were archived as Excel files of Jul. 2. (4) FPAR (Fraction of Photosynthetically Active Radiation) of maize and wheat by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in MS Office Word format. (5) the radiative temperature by the automatic thermometer (FOV: 10°; emissivity: 0.95), measured at nadir with time intervals of one second in Yingke oasis maize field (one from BNU and the other from Institute of Remote Sensing Applications), Huazhaizi desert maize field (only one from BNU for continuous radiative temperature of the maize canopy) and Huazhaizi desert No. 2 plot (two for reaumuria soongorica canopy and the background bare soil). Raw data, blackbody calibrated data and processed data were all archived as Excel files. (6) the component temperature in Yingke oasis maize field (by the handheld radiometer and the thermal image from BNU), Yingke oasis wheat field and Huazhaizi desert maize field. For maize, the component temperature included the vertical canopy temperature, the bare land temperature and the plastic film temperature; for the wheat, it included the vertical canopy temperature, the half height temperature, the lower part temperature and the bare land temperature. The data included raw data (in MS Office Word format), recorded data and the blackbody calibrated data (in Excel format). (7) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the observation height). Data were archived in MS Office Excel format. (8) the radiative temperature by the handheld radiometer in Yingke oasis maize field and Huazhaizi desert maize field (the vertical canopy observation and the transect observation for both fields), and Huazhaizi desert No. 2 plot (the NE-SW diagonal observation). The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (9) ground object reflectance spectra in Yingke oasis maize field by ASD FieldSpec (350～2 500 nm) from BNU. The vertical canopy observation and the line-transect observation were used. The data included raw data (from ASD, read by ViewSpecPro), recorded data and processed data on reflectance (in Excel format).
CHEN Ling, GUO Xinping, REN Huazhong, WANG Tianxing, XIAO Yueting, YAN Guangkuo, CHE Tao, GE Yingchun, GAO Shuai, LI Hua, LI Li, LIU Sihan, SU Gaoli, WU Mingquan, XIN Xiaozhou, ZHOU Chunyan, ZHOU Mengwei, FAN Wenjie, SHEN Xinyi, YU Fan, YANG Guijun, Liu Liangyun
The dataset of the ground-based microwave radiometers and ground truth observations (multi-frequency, multi-polar multi-angle) for soil freeze/thaw cycle in the A'rou foci experimental area from Oct. 19 to 25, 2007, during the pre-observation period, X-band from Oct. 20 to 25, S-band from Oct. 20 to 25, K-band from Oct. 19 to 24, and Ka-band from Oct. 20 to 24, to be specific. The aims of the measurements were the effects of the soil freeze/thaw status on the microwave brightness temperatures. Those provide reliable ground data for improving and verifying microwave radiative transfer models and parameters retrieval of soil freeze/thaw status. Time-continuous ground observations synchronizing with the ground-based microwave radiometers including self-recording and manual measurements, were carried out in No. 1 quadrate of A'rou with dry natural grassland as the landscape. (1) self-recording observations: the soil temperatures at 0cm, 5cm, 10cm, 15cm and 20cm by the temperature probe from Oct. 21 to 25, 2007, and shallow layer soil moisture at 0-5cm, 5cm, 10cm, 15cm and 20cm by TDR from Oct. 19 to 21 2007. Both time interval of the observations were 5 minutes. (2) manual observations: the surface radiative temperature by the handheld infrared thermometer, the soil temperature at 0cm, 5cm, 10cm, 15cm and 20cm by the glass geothermometer, and the mean soil temperature from 0-5cm by the probe thermometer. The time interval of observations was 30 minutes from Oct. 19-21, 2007.
BAI Yunjie, CAO Yongpan, HAO Xiaohua, LI Hongyi, LI Xin, LI Zhe, QIN Chun, Wang Weizhen
The dataset of the ground-based microwave radiometers and ground truth observations for soil freeze/thaw cycle was obtained in the A'rou foci experimental area (N38º03.639'/E100º26.793'; 2998m) from May 5 to 8, 2008, S-band from Apr. 6 to 8, C-band from Apr. 7 to 8, K-band from Apr. 5 to 8, and Ka-band on Apr. 5, to be specific. The aims of the measurements were the effects of the soil freeze/thaw status on the microwave brightness temperatures. The observation site was bare land and the soil moisture was 30% after artificial irrigation. Observation items included the soil temperature at 5cm automatically (the time interval: 10m), the soil temperature at 5cm, 10cm, 20cm and 30cm by the probe thermometer (the time interval: 1h), and the soil moisture at 5cm, 10cm, 20cm and 30cm automatically (the time interval: 10m). Seven files were included, four ground-based microwave radiometers (S-band, C-band, K-band and Ka-band) observations, the automatic soil temperature, the manual soil temperature, and the automatic soil moisture, and the last three were archived in Excel format.
CAO Yongpan, CHE Tao, HAO Xiaohua, LI Zhe, Wang Weizhen, WU Yueru
The dataset of the survey at the sampling plots in the transit zone between oasis and desert was obtained in the Linze station foci experimental area. Observation items included: (1) soil moisture and temperature of the soil profiles (0-10cm, 10-20cm, 20-30cm and 30-40cm) measured by the cutting ring method (50cm^3, once each layer) and the probe thermometer (15cm, twice each layer) on May 25, 2008. Data were archived as Excel files. (2) biomass (green weight and dry weight, samples from 0.5m×0.5m) with photos measured by the plant harvesting in LY07 quadrate on Jun. 22, 2008. Data were archived as Excel files. (3) vegetation coverage measured by the diagonal method on Jun. 22, 2008. By estimating the coverage along the two diagonals, the total coverage of the plot can be developed. Data were archived as Excel files.
GAO Song, PAN Xiaoduo, Qian Jinbo, SONG Yi, WANG Yang, ZHU Shijie
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission and Landsat TM was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jul. 7, 2008. Observation items included: (1) the radiative temperature by the thermal camera (Institute of Remote Sensing Applications) of maize, wheat and the bare land of Yingke oasis maize field at a height of 1.2m above the ground. Optical photos of the scene were also taken. Raw data (read by ThermaCAM Researcher 2001) was archived in IMG format, and blackbody calibrated data and processed data were all archived as Excel files. (2) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (3) Reflectance spectra in Yingke oasis maize field by ASD FieldSpec (350-1603nm) from Institute of Remote Sensing Applications (CAS). The grey board and the black and white cloth were also used for calibration on the CCD camera. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (4) the component temperature by the handheld radiometer in Yingke oasis maize field and Huazhaizi desert maize field. For maize, the component temperature included the vertical canopy temperature, the bare land temperature and the plastic film temperature; for the wheat, it included the vertical canopy temperature, the half height temperature, the lower part temperature and the bare land temperature. The data included raw data (in Word format), recorded data and the blackbody calibrated data (in Excel format). (5) the radiative temperature by the handheld radiometer (emissivity = 1.0) in Yingke oasis maize field (for the canopy mean temperature), Huazhaizi desert maize field (for the transect temperature), Zhangye airport (the black and white cloth for calibration) and Huazhaizi desert No. 2 plot (the diagonal radiative temperature and the radiative temperature of 30m*30m subplot). The component temperature was also measured. The data included raw data (in Word format), recorded data and the blackbody calibrated data (as Excel files). (6) The air temperature (°C) , the soy bean leaf temperature (°C) and the maize leaf temperature (°C) by SPAD (from Institute of Remote Sensing Applications (CAS)) in Yingke oasis maize field. Besides, spectrum, photosynthesis, fluorescence and chlorophyll were measured as well. (7) The leaf reflectance spectra ASD (serial number: 64831) and 50% grey board from Institute of Remote Sensing Applications (CAS). The spectral DN was changed into radiance based on the 50% grey board calibration data and calibration lamp data, which could further be transformed into Excel format. Moreover, the solar radiance=the reference board radiance/the reference reflectance. (8) The leaf fluorescence by ImagingPam from Beijing Academy of Agriculture and Forestry Sciences. YII = (Fm'-F)/Fm' was applied for caculation, F indicating fluorescence before saturating flash light, Fm' the maximum fluorescence before saturating flash light, and YII the quantum yield of photosystem II. Data were archived in pim and could be read by ImagingPam, which can be downloaded from http://www.zealquest.com. (9) The leaf photosynthesis by LI-6400. (10) The radiative temperature by the automatic thermometer (FOV: 10°; emissivity: 0.95), observing straight downwards at intervals of 1s in Yingke oasis maize field and Huazhaizi desert maize field. Raw data, blackbody calibrated data and processed data were all archived in Excel format. (11) FPAR (Fraction of Photosynthetically Active Radiation) by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in the table format of Word. (12) Atmospheric parameters near Daman Water Management office by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, Rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number.
CHEN Ling, REN Huazhong, WANG Tianxing, YAN Guangkuo, HAO Xiaohua, WANG Shuguo, LI Li, LI Hua, LIU Sihan, SU Gaoli, XIA Chuanfu, XIN Xiaozhou, ZHOU Chunyan, ZHOU Mengwei, LI Xinhui, YU Fan, ZHU Xiaohua, YANG Guijun, CHENG Zhanhui, Liu Liangyun
The data set contains all single glacial reserves (in KM3) in the Tibetan Plateau of 1970s and 2000s. This data set comes from the result data of the paper entitled "consolidating the Randolph glacier inventory and the glacier inventory of China over the Qinghai titanium plate and investigating glacier changes since the mid-20th century". The first draft of this paper has been completed and is planned to be submitted to earth system science data. The 1970s basic glacier catalog data in the dataset is extracted from Randolph glacier Inventory data set, 2000s basic glacial catalogue is from China's second glacial catalogue data set. Based on the glacial boundary extracted from the two data sets and combined with the grid based bedrock elevation data set (https://www.ngdc.noaa.gov/mgg/global/global.html, DOI: 10.7289/v5c8276m) and the glacial table obtained by a slope dependent method Based on the surface elevation data set, the single glacier reserves in the two catalogues are calculated. In addition, the calculation results of single glacier reserves obtained in this study have been compared and verified with the calculation results of partial glacier reserves, relevant remote sensing data sets, and the global glacier thickness data set based on the average of multiple glacier model sets in multiple directions, and the errors in the calculation results have also been quantified. The establishment of the data set is expected to provide the data basis for the future regional water resources estimation and glacier ablation research, and the acquisition of the data also provides a new idea for the future glacier reserves research.
WANG Zhongjing
The proportion data set of daily cloudless MODIS snow cover area in babaohe river basin (2008.1.1-2014.6.1) was obtained after cloud removal processing using a cloud removal algorithm based on cubic spline function interpolation on the basis of daily cloudless MODIS snow cover product-mod10a1 (tang zhiguang, 2013). This data set adopts the projection method of UTM (horizontal axis isometric cutting cylinder), with a spatial resolution of 500m, and provides Daily Snow Albedo daily-sad results for the babao river basin.The data set is a daily file from January 1, 2008 to June 1, 2014.Each file is the snow albedo result of the day, with a value of 0-100 (%), is the ENVI standard file, and the naming rule is: mod10a1.ayyyyddd_h25v05_snow_sad_grid_2d_reproj_babaohe_nocloud.img, where YYYY represents the year, DDD stands for Julian day (001-365/366).The file can be opened directly with ENVI or ARCMAP software. The original MODIS snow cover data products processed by declouding are derived from MOD10A1 products processed by the us national snow and ice data center (NSIDC). This data set is in HDF format and USES sinusoidal projection. The attributes of the cloud-free MODIS albedo data set (2008.1.1-2014.1.1) in babaohe river basin are composed of the spatial and temporal resolution, projection information and data format of the dataset.
WANG Jian, PAN Haizhu
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS
0931-4967287
poles@itpcas.ac.cn
Links
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved
｜ 
No.11010502040845
Tech Support: westdc.cn
