The Antarctic ice sheet elevation data were generated from radar altimeter data (Envisat RA-2) and lidar data (ICESat/GLAS). To improve the accuracy of the ICESat/GLAS data, five different quality control indicators were used to process the GLAS data, filtering out 8.36% unqualified data. These five quality control indicators were used to eliminate satellite location error, atmospheric forward scattering, saturation and cloud effects. At the same time, dry and wet tropospheric, correction, solid tide and extreme tide corrections were performed on the Envisat RA-2 data. For the two different elevation data, an elevation relative correction method based on the geometric intersection of Envisat RA-2 and GLAS data spot footprints was proposed, which was used to analyze the point pairs of GLAS footprints and Envisat RA-2 data center points, establish the correlation between the height difference of these intersection points (GLAS-RA-2) and the roughness of the terrain relief, and perform the relative correction of the Envisat RA-2 data to the point pairs with stable correlation. By analyzing the altimetry density in different areas of the Antarctic ice sheet, the final DEM resolution was determined to be 1000 meters. Considering the differences between the Prydz Bay and the inland regions of the Antarctic, the Antarctic ice sheet was divided into 16 sections. The best interpolation model and parameters were determined by semivariogram analysis, and the Antarctic ice sheet elevation data with a resolution of 1000 meters were generated by the Kriging interpolation method. The new Antarctic DEM was verified by two kinds of airborne lidar data and GPS data measured by multiple Antarctic expeditions of China. The results showed that the differences between the new DEM and the measured data ranged from 3.21 to 27.84 meters, and the error distribution was closely related to the slope.

Data Citations Data citation guideline What's data citation?

Cite as:

Huang, H. (2018). Antarctic ice sheet surface elevation data (2003-2009). A Big Earth Data Platform for Three Poles, DOI: 10.11888/Glacio.tpdc.270891. CSTR: 18406.11.Glacio.tpdc.270891. (Download the reference： RIS | Bibtex )

Using this data, the data citation is required to be referenced and the related literatures are suggested to be cited.

References literature

1.Huabin Huang, Xiao Cheng, Peng Gong, & CLINTON Nick. (2014). A new 1000m digital elevation model for Antarctica by integrating ICESat/GLAS and Envisat RA-2 data. Journal of Remote Sensing, 18(1), 117-125. (View Details )

Support Program

CASEarth:Big Earth Data for Three Poles（grant No. XDA19070000） (No:XDA19000000)

Copyright & License

To respect the intellectual property rights, protect the rights of data authors, expand services of the data center, and evaluate the application potential of data, data users should clearly indicate the source of the data and the author of the data in the research results generated by using the data (including published papers, articles, data products, and unpublished research reports, data products and other results). For re-posting (second or multiple releases) data, the author must also indicate the source of the original data.

License： This work is licensed under an Attribution 4.0 International (CC BY 4.0)