Acceleration is an important parameter to reflect the dynamics of slope. Twenty-two acceleration sensors are arranged on the slope surface, lithological interface and inside the slope of the Xiaguiwa bedding rock model slope. An acceleration sensor is arranged on the shaking table to record the real acceleration state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the acceleration data set of the bedding rock model slope; The peak values of the acceleration data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action, and the ratio of the peak acceleration on the slope to the peak acceleration on the table can reflect whether the slope is enhanced or attenuated at each location under the seismic action.

File naming and required software

File naming: The acceleration is stored in text format in a folder named "GKaa", and the file name is "TDbb.txt", where aa represents the condition number and bb represents the sensor number. Data reading method: All ASCII files in this dataset can be opened directly with a text program (such as Notepad), and the acceleration data will be shown when the file is

Data Citations Data citation guideline What's data citation?

Cite as:

Guo, M. (2022). Shaking table model test data for bedding rock slope - acceleration. A Big Earth Data Platform for Three Poles, DOI: 10.11888/Terre.tpdc.272180. CSTR: 18406.11.Terre.tpdc.272180. (Download the reference： RIS | Bibtex )

Using this data, the data citation is required to be referenced and the related literatures are suggested to be cited.

Support Program

Catastrophic mechanisms and risk control of disastrous landslides in the Tibetan Plateau (No:2018YFC1505000)

Endogenic and exogenic geological conditions and coupling effects on the occurrence of landslide hazard (No:2018YFC1505001)

Copyright & License

To respect the intellectual property rights, protect the rights of data authors, expand services of the data center, and evaluate the application potential of data, data users should clearly indicate the source of the data and the author of the data in the research results generated by using the data (including published papers, articles, data products, and unpublished research reports, data products and other results). For re-posting (second or multiple releases) data, the author must also indicate the source of the original data.

License： This work is licensed under an Attribution 4.0 International (CC BY 4.0)