Large-ensemble simulations of the atmosphere-only time-slice experiments for the Polar Amplification Model Intercomparison Project (PAMIP) were carried out by the model group of the Chinese Academy of Sciences (CAS) Flexible Global Ocean-Atmosphere-Land System (FGOALS-f3-L). Eight groups of experiments forced by different combinations of the sea surface temperature (SST) and sea ice concentration (SIC) for pre-industrial, present-day, and future conditions were performed and published. The time-lag method was used to generate the 100 ensemble members, with each member integrating from 1 April 2000 to 30 June 2001 and the first two months as the spin-up period. All of these model datasets will contribute to PAMIP multi-model analysis and improve the understanding of polar amplification.
HE Bian
CAS FGOALS-f3-H, with a 0.25° horizontal resolution, and CAS FGOALS-f3-L, with a 1° horizontal resolution, were forced by the standard external conditions, and two coordinated sets of simulations were conducted for 1950–2014 and 2015–50 with the Experiment IDs of ‘highresSST-present’ and ‘highresSST-future’, respectively. The model outputs contain multiple time scales including the required hourly mean, three-hourly mean, six-hourly transient, daily mean, and monthly mean datasets.
BAO Qing
Meteorological elements of the dataset include the near-surface land-air exchange parameters, such as downward/upward longwave/shortwave radiation flux, momentum flux, sensible heat flux, latent heat flux, etc. In addition, the vertical distributions of 3-dimensional wind, temperature, humidity, and pressure from the surface to the tropopause are also included. Independent evaluations were conducted for the dataset by comparison between the observational data and the most recent ERA5 reanalysis data. The results demonstrate the accuracy and superiority of this dataset against reanalysis data, which provides great potential for future climate change research.
LI Fei, Ma Shupo, ZHU Jinhuan, ZOU Han , LI Peng , ZHOU Libo
The Tibetan Plateau Subregional Dynamical Downscaling Dataset-Standard Year (TPSDD-Standard) is a high spatial-temporal resolution gridded dataset for the study of land-air exchange processes and lower atmospheric structure over the entire Tibetan Plateau, taking into account the climatic characteristics of each subregion of the Tibetan Plateau. Based on the 500 hPa multi-year average of the geopotential height field over the Tibetan Plateau, the year (2014) with the largest pattern correlation coefficient with this geopotential height field is selected as the standard year, which means that it can roughly reflect the multi-year average status of the atmosphere over the Tibetan Plateau. The temporal resolution of this data is 1 hour and the spatial resolution is 5 km. Meteorological elements of the dataset include near-surface land-air exchange parameters such as downward/upward long-wave/short-wave radiation fluxes, sensible heat fluxes, latent heat fluxes, etc. In addition, the 3-dimensional vertical distribution of wind, temperature, humidity, and pressure from the surface to the top of the troposphere is also included. The dataset was independently evaluated by comparing the observed data with the latest ERA5 reanalysis data. The results demonstrate the accuracy and superiority of the dataset, which offers great potential for future climate change studies.
LI Fei, Ma Shupo, ZHU Jinhuan, ZHOU Libo , LI Peng , ZOU Han
The extraction of glacier surface movement is of great significance in the study of glacier dynamics and material balance changes. In view of the shortcomings of the current application of autonomous remote sensing satellite data in glacier movement monitoring in China, the SAR data covering typical glaciers in alpine areas of the Qinghai Tibet Plateau from 2019 to 2020 obtained under the GF-3 satellite FSI mode was used to obtain the glacier surface velocity distribution in the study area with the help of a parallel offset tracking algorithm. With its good spatial resolution, GF-3 image has significant advantages in extracting glacier movement with small scale and slow movement, and can better reflect the details and differences of glacier movement. This study is helpful to analyze the movement law and spatio-temporal evolution characteristics of glaciers in the Qinghai Tibet Plateau under the background of climate change.
YAN Shiyong
The Antarctic McMurdo Dry Valleys ice velocity product is based on the Antarctic Ice Sheet Velocity and Mapping Project (AIV) data product, which is post-processed with advanced algorithms and numerical tools. The product is mapped using Sentinel-1/2/Landsat data and provides uniform, high-resolution (60m) ice velocity results for McMurdo Dry Valleys, covering the period from 2015 to 2020.
JIANG Liming JIANG Liming JIANG Liming
This data is the simulation of Antarctic sea ice density data from 2020 to 2100 under the medium emission scenario (ssp245) of the 6th International Coupled Model Comparison Program (CMIP6). The 25 mode data of CMIP6 were uniformly interpolated and then aggregated averaged. The size of sea ice density data is 0-1, the data time range is from January 2020 to December 2100, the time resolution is month, the spatial range is south of 45 ° S, and the spatial resolution is 1 ° × 1°。 This data provides the status and evolution of Antarctic sea ice under the medium emission scenario, and can provide reference for future changes in Antarctica.
LI Shuanglin, WANG Hui
The basic data of hydrometeorology, land use and DEM were collected through the National Meteorological Information Center, the Hydrological Yearbook, the China Statistical Yearbook and the Institute of Geographic Sciences and Resources of the Chinese Academy of Sciences. The distributed time-varying gain hydrological model with independent intellectual property rights is used for modeling, and the Qinghai Tibet Plateau is divided into 10937 sub basins with a threshold of 100 square kilometers. In Heihe River, Yarlung Zangbo River, the source of Yangtze River, the source of Yellow River, Yalong River, Minjiang River and Lancang River basins, 14 flow stations were selected to observe the daily flow data to develop and verify the model. The daily scale Naxi efficiency coefficient is above 0.7, and the correlation coefficient is above 0.8. The precipitation and temperature data output from 13 models and 4 scenarios provided by CMIP6 are used to post process the future precipitation and temperature data. The post processed precipitation and temperature driven hydrological model simulates the water cycle process from 2046 to 2065, and gives the possible future spatial and temporal distribution of 0.1 degree daily scale runoff across the Qinghai Tibet Plateau.
YE Aizhong
Based on the CMIP6 model data (see Table 1 for the model list), the distribution and thickness of frozen soil in the Qinghai Tibet Plateau and the circum Arctic region, as well as the terrestrial ecosystem carbon flux (total primary productivity GPP and ecosystem carbon source sink NEP) data in the frozen soil area under different climate change scenarios (including SSP126, SSP245 and SSP585) in the historical period (1990-2014) and the future (2046-2065) are estimated, with a spatial resolution of 1 ° × 1°。 Among them, the distribution of frozen soil is estimated under the future climate warming scenario by using the spatial constraint method (Chadburn et al., 2017), based on the probability of frozen soil occurrence under different temperature gradients at the current stage, and combined with the future temperature change simulated by the Earth system model. For the change of active layer thickness, the sensitivity of active layer thickness to temperature change estimated by remote sensing at this stage is used to constrain the change of active layer thickness simulated by the Earth System Model, so as to correct the error of the model in simulating the thickness of frozen soil active layer. The future permafrost carbon flux is the multi model ensemble average of the Earth system model simulation results. The simulation results show that the permafrost in the Qinghai Tibet Plateau will be significantly degraded under the future climate change scenario. With the future temperature rise, the continuous permafrost regions will be shown as carbon sources, but the temperature rise will promote the growth of vegetation, and the carbon sink capacity in the discontinuous permafrost regions will be enhanced. Similar to the Qinghai Tibet Plateau, the permafrost around the Arctic will also be generally degraded in the future, and the future climate warming will promote the growth of vegetation in the Arctic, thus enhancing regional carbon sinks.
WANG Tao, LIU Dan , WEI Jianjun
Based on the 33rd Antarctic Scientific Expedition in China, the data set of temporal and spatial distribution of metal element concentrations in snow and ice obtained on the section from Zhongshan Station to Dome A in East Antarctica mainly includes: 1. A shallow ice core obtained 202 km away from Zhongshan Station. The ice core covers the period from 1990 to 2017 with a resolution of years, including metal element iron, hydrogen and oxygen isotopes and other data. 2. Collect a sample every 10km along the Zhongshan Station Dome A section in East Antarctica. The metal elements include rare earth elements, barium and other elements. The data can be used to study the pollution and contribution of natural sources and human activities to Antarctic snow and ice.
Du Zhiheng
Based on the data of GF-1 and GF-2 in China, the freeze-thaw disaster distribution data of Qinghai Tibet project corridor is produced by using the deep learning classification method and manual visual interpretation and correction. The geographical range of the data is 40km along the Xidatan Anduo section of Qinghai Tibet highway. The data include the distribution data of thermokast lakes and the distribution data of thermal melting landslides. The dataset can provide data basis for the research of freeze-thaw disaster and engineering disaster prevention and reduction in Qinghai Tibet engineering corridor. The spatial distribution of freezing and thawing disasters within 40km along the Xidatan-Anduo section of Qinghai Tibet highway is self-made based on the domestic GF-2 image data. Firstly, the deep learning method is used to extract the mud flow terrace block from GF-2 data; Then, ArcGIS is used for manual editing.
NIU Fujun, LUO Jing LUO Jing
This data is generated based on meteorological observation data, hydrological station data, combined with various assimilation data and remote sensing data, through the preparation of the Qinghai Tibet Plateau multi-level hydrological model system WEB-DHM (distributed hydrological model based on water and energy balance) coupling snow, glacier and frozen soil physical processes. The time resolution is monthly, the spatial resolution is 5km, and the original data format is ASCII text format, Data types include grid runoff and evaporation (if evaporation is less than 0, it means condensation; if runoff is less than 0, it means precipitation is less than evaporation in the month). If the asc cannot be opened normally in arcmap, please top the first 5 lines of the asc file.
WANG Lei, CHAI Chenhao
There are 396 temperature-sensitive proxy data for the past millennium over the Northern Hemisphere, including 370 tree rings, 15 ice cores, 9 lake sediments and 2 historical documents; This data is derived from the global temperature proxy dataset released by PAGES2k Consortum in 2017; During the process of temperature assimilation in the past millennium (1000-2000 AD) in the Northern Hemisphere, the data were further screened, and only the data with annual resolution were retained; The proxy data contained in the dataset have passed strict quality inspection and temperature signal verification; The data set can be used to reconstruct the temperature of the Northern Hemisphere at the hemispherical and regional scales for the past millennium.
FANG Miao
This data is a 5km monthly hydrological data set, including grid runoff and evaporation (if evaporation is less than 0, it means condensation; if runoff is less than 0, it means precipitation is less than evaporation), simulated and output through the WEB-DHM distributed hydrological model of the Indus River basin, with temperature, precipitation, barometric pressure, etc. as input data.
WANG Lei, LIU Hu
The ground-based observation dataset of aerosol optical properties over the Tibetan Plateau was obtained by continuous observation with a Cimel 318 sunphotometer, involving two stations: Qomolangma Station and Nam Co Station. These products have taken the process of cloud detection. The data cover the period from January 1, 2021 to December 31, 2021, and the time resolution is daily. The sunphotometer has eight observation channels from visible light to near infrared, and the central wavelengths are 340, 380, 440, 500, 670, 870, 940 and 1120 nm, respectively. The field of view angle of the instrument is 1.2°, and the sun tracking accuracy is 0.1°. Six bands of aerosol optical thickness can be obtained from direct solar radiation, and the accuracy is estimated to be 0.01-0.02. Finally, AERONET unified inversion algorithm was used to obtain the aerosol optical thickness, Ångström index, aerosol particle size distribution, single scattering albedo, phase function, complex refraction index and asymmetry factor.
CONG Zhiyuan
Both a decrease of sea ice and an increase of surface meltwater, which may induce ice-flow speedup and frontal collapse, have a significant impact on the stability of the floating ice shelf in Greenland. However, detailed dynamic precursors and drivers prior to a fast-calving process remain unclear due to sparse remote sensing observations. Here, we present a comprehensive investigation on hydrological and kinematic precursors before the calving event on 26 July 2017 of Petermann Glacier in northern Greenland, by jointly using remote sensing observations at high-temporal resolution and an ice-flow model. Time series of ice-flow velocity fields during July 2017 were retrieved with Sentinel-2 observations with a sub-weekly sampling interval. The ice-flow speed quickly reached 30 m/d on 26 July (the day before the calving), which is roughly 10 times quicker than the mean glacier velocity.
JIANG Liming
Glaciers are sensitive to climate change. With global warming, the melting of glaciers continues to accelerate all over the world. Surging glaciers are glaciers with intermittent and periodic acceleration, which is a sensitive indicator of climate change. Based on Landsat and Sentinel satellite images from 1980s to 2020, the study area images were obtained by filtering, stitching, and cropping. Among them, the L1GS level images collected by Landsat TM sensor were geo-registered using a second-order polynomial, and the error of the geo- registered images was less than one pixel. After image template matching with an orientation correlation algorithm, this data set provides the surface ice flow velocity of a typical surging glacier in the Greenland ice sheet, Sortebræ Glacier in different period from 1980s to 2020. It is expected to contribute to the research on the surging process of Sortebræ Glacier and the discussion on the mechanism of glacier surging in the context of global warming.
QIAO Gang , SUN Zixiang , YUAN Xiaohan
Data content: money supply (2012-2021) and assets and liabilities of financial institutions (2007-2020) Data source and processing method: The original data of the third pole (China) banks and currencies from 2015 to 2021 were obtained from the official website of the World Bank and Sina.com, and the data set of the third pole (China) banks and currencies from 2012 to 2021 was obtained through data sorting, screening and cleaning. The data started from 2012 to 2021 in Microsoft Excel (xls) format. Data quality description: excellent Data application achievements and prospects: provide effective reference as socio-economic data
FU Wenxue
Data content: price index_ Consumer Price Index (CPI) (2009-2022) Data source and processing method: The original data of the third pole (China) price index economy from 2015 to 2022 were obtained from the official website of the World Bank and Sina.com, and the economic data set of the third pole (China) price index from 2009 to 2022 was obtained through data collation, screening and cleaning. The data started from 2009 to 2022 in Microsoft Excel (xls) format. Data quality description: excellent Data application achievements and prospects: provide effective reference as socio-economic data
FU Wenxue
Data content: annual statistics of gross domestic product (GDP) (1991-2021), domestic assets and liabilities data (2011-2020) and domestic input and output data (2012-2018) Data source and processing method: The original macroeconomic data of the third pole (China) from 2015 to 2021 were obtained from the official website of the World Bank and Sina.com, and the macroeconomic data set of the third pole (China) from 1991 to 2021 was obtained through data sorting, screening and cleaning. The data was stored in Microsoft Excel (xls) format. Data quality description: excellent Data application achievements and prospects: provide effective reference as socio-economic data
FU Wenxue
Data content: foreign economy and trade_ Total import and export of goods (1991-2021) Data source and processing method: The original data of foreign trade and investment of the third pole (China region) from 2015 to 2021 were obtained from the official website of the World Bank and Sina.com, and the data set of foreign trade and investment of the third pole (China region) from 1991 to 2021 was obtained through data sorting, screening and cleaning. The data started from 1991 to 2021 in Microsoft Excel (xls) format. Data quality description: excellent Data application achievements and prospects: provide effective reference as socio-economic data
FU Wenxue
This phenological data is based on the MOD13A2 data of the Qinghai Tibet Plateau from 2000 to 2015 (with a temporal resolution of 16 days and a spatial resolution of 1km). The NDVI curve is fitted using the segmented Gaussian function in the TIMESAT software. The spring phenology, autumn phenology and the length of the growth season are extracted using the dynamic threshold method. The thresholds of spring phenology and autumn phenology are set to 0.2 and 0.7 respectively. The phenological data were masked. Among them, the mask rules are: 1) The maximum value of NDVI must be met between June and September; 2) The average value of NDVI from June to September shall not be less than 0.2; 3) The average NDVI in winter shall not exceed 0.3.
ZU Jiaxing , ZHANG Yangjian
This data set is the global vegetation productivity data, including total primary productivity (GPP), net primary productivity (NPP) and net ecosystem productivity (NEP). It is simulated by BCC-ESM1 model in Phase 6 of the Coupling Model Comparison Plan (CMIP6) under the historical scenario. The data time range is 1850-2014, the time resolution is month, and the spatial resolution is about 2.8125 °. Analog Data Details Visible Link https://www.wdc-climate.de/ui/cmip6?input=CMIP6.CMIP.BCC.BCC -ESM1。
ZHENG Zhoutao
The feedback of the biosphere to the atmosphere is one of the core contents of global change research. When the atmospheric CO2 concentration rises, the behavior of the terrestrial ecosystem is the main uncertainty factor to predict this feedback effect. Elevated CO2 concentration (eCO2) can directly stimulate plant growth and ecosystem C absorption by increasing carboxylation and inhibiting photorespiration rate. Through the impact of CO2 fertilization effect (CFE) on photosynthesis and carbon sequestration, the terrestrial ecosystem can buffer the surge of atmospheric CO2 concentration, thereby slowing down climate change. In order to study the impact of CO2 enrichment on vegetation productivity, CO2 enrichment experiments were conducted at Naqu Grassland Station (31 ° 38 ′ 31 ″ N, 92 ° 00 ′ 54 ″ E, 4600m above sea level) in the north of the Qinghai Tibet Plateau. The test is designed in zones, with CO2 as the main treatment factor and N as the secondary treatment factor; A total of four experimental treatments span two CO2 concentration levels [ambient CO2 (aCO2), increased CO2 (eCO2):+100ppm]. Considering the low vegetation height and windy weather in the study area, octagonal open top chambers (OTCs) are used to control the carbon dioxide concentration, rather than the free FACE system. The design height of OTC is 2.5 meters, the length of each side is 1.5 meters, and each OTC occupies 7.7 square meters.
ZHANG Yangjian
This data set is the daily vorticity related flux observation data of Naqu flux station (31.64 ° N 92.01 ° E, 4598 m a.s.l.), including ecosystem net ecosystem productivity (NEP), total primary productivity (GPP) and ecosystem respiration (ER) data. The main steps of data pre-processing include wild point removal (± 3 σ）、 Coordinate axis rotation (3D wind rotation), Webb Pearman Leuning correction, outlier elimination, carbon flux interpolation and decomposition, etc. Missing data are interpolated through the nonlinear empirical formula between CO2 flux value (Fc) and environmental factors.
ZHANG Yangjian
Vegetation survey data is essential for the study of ecosystem structure and function. The Qinghai Tibet Plateau contains a vast grassland ecosystem, mainly including alpine meadow, alpine grassland, and alpine desertification grassland. Due to the unique geographical location and high altitude anoxic environmental conditions, the community survey data in the northern Tibetan Plateau is relatively scarce. This data set includes the aboveground biomass and coverage data of 47 sampling points on the northern Tibet transect in 2019, and the sampling time is from July to August. The sample size is 50cm × 50cm, dry weight of the plant is weighed after drying. This data set can be used for spatial analysis of productivity and calibration of models.
ZHANG Yangjian, ZHU Juntao
This dataset is the daily vorticity related flux observation data of Naqu flux station (31.64 ° N 92.01 ° E, 4598 m a.s.l.), including net ecosystem productivity (NEP), total primary productivity (GPP), ecosystem respiration (ER), evapotranspiration, latent heat, sensible heat, air temperature, relative humidity, wind speed, soil temperature, soil moisture and other data. The main steps of data pre-processing include wild point removal (± 3 σ）、 Coordinate axis rotation (3D wind rotation), Webb Pearman Leuning correction, outlier elimination, carbon flux interpolation and decomposition, etc. Missing data are interpolated through the nonlinear empirical formula between CO2 flux value (Fc) and environmental factors.
ZHANG Yangjian
This dataset is global respiration data, including autotrophic respiration (ra) and heterotrophic respiration (rh). It is simulated by TaiESM1 model in Phase 6 of the Coupling Model Comparison Plan (CMIP6) under historical scenarios. The data time range is 1850-2014, the time resolution is month, and the spatial resolution is about 0.9 ° x1.25 °. Analog Data Details Visible Link https://www.wdc-climate.de/ui/cmip6?input=CMIP6.CMIP.AS -RCEC.TaiESM1.historical。
Program for Climate Model Diagnosis and Intercomparison (PCMDI)
CMIP6 is the sixth climate model comparison plan organized by the World Climate Research Program (WCRP). Original data from https://www.wcrp-climate.org/wgcm-cmip/wgcm-cmip6 。 This dataset contains four SSP scenarios of Scenario MIP in CMIP6. (1) SSP126: Upgrade of RCP2.6 scenario based on SSP1 (low forcing scenario) (radiation forcing will reach 2.6W/m2 in 2100). (2) SSP245: Upgrade of RCP4.5 scenario based on SSP2 (moderate forcing scenario) (radiation forcing will reach 4.5 W/m2 in 2100). (3) SSP370: New RCP7.0 emission path based on SSP3 (medium forcing scenario) (radiation forcing will reach 7.0 W/m2 in 2100). (4) SSP585: Upgrade the RCP8.5 scenario based on SSP5 (high forcing scenario) (SSP585 is the only SSP scenario that can make the radiation forcing reach 8.5 W/m2 in 2100). Using GRU data to correct the post-processing deviation of the original CMIP data, the post-processing data set of monthly precipitation (pr) and temperature (tas) estimates from 2046-2065 was obtained, with a reference period of 1985-2014.
YE Aizhong
The data set of ecological adjustment value of Arctic permafrost change from 1982 to 2015, with the time resolution of 1982, 2015 and the change rate of two phases, covers the entire Arctic tundra area, with the spatial resolution of 8km. Based on multi-source remote sensing, simulation, statistics and measured data, and combined with GIS and ecological methods, it quantifies the adjustment service value of Arctic permafrost to the ecosystem, The unit price refers to the correlation (0.35) between the active layer thickness and NDVI changes after excluding precipitation and snow water equivalent, and the grassland ecosystem service value (the unit price of tundra ecosystem service is based on 1/3 of the grassland ecosystem service value).
WANG Shijin
The active layer thickness in the Wudaoliang permafrost region of the Qinghai Tibet Plateau is retrieved based on the seasonal deformation obtained by SBAS-InSAR technology and ERA5-Land spatio-temporal multi-layer soil moisture data corrected by variational mode decomposition method. The time range of the is 2017-2020, and the spatial resolution is 1km. This data can be used to study the change of the active layer thickness in the permafrost region of the Qinghai Tibet Plateau and analyze its interaction with climate change, water cycle and energy cycle. It is significance to understand the permafrost degradation, environment evolution and the impact of permafrost degradation on ecology and climate.
LU Ping , HAO Tong , LI Rongxing
The aerosol optical thickness data of the Arctic Alaska station is formed based on the observation data products of the US Department of Energy's atmospheric radiation observation program at the Arctic Alaska station. The data coverage time is from 1998 to 2020, the time resolution is hourly, the coverage site is the Arctic Alaska station, and the longitude and latitude coordinates are (71 ° 19 ′ 22.8 ″ N, 156 ° 36 ′ 32.4 ″ W). The observation data is obtained from the inversion of the radiation data observed by MFRSR instrument. The optical characteristic variable is aerosol optical thickness, and the observation inversion error range is about 15%. The data format is nc format.
ZHAO Chuanfeng
The triple pole aerosol type data product is an aerosol type result obtained through a series of data pre-processing, quality control, statistical analysis and comparative analysis processes by comprehensively using MEERA 2 assimilation data and active satellite CALIPSO products. The key of the aerosol type fusion algorithm is to judge the aerosol type of CALIPSO. During the data fusion of aerosol type, the final aerosol type data (12 types in total) and quality control results in the three polar regions are obtained according to the types and quality control of CALIPSO aerosol types and referring to MERRA 2 aerosol types. The data product fully considers the vertical and spatial distribution of aerosols, and has a high spatial resolution (0.625 ° × 0.5 °) and time resolution (month).
ZHAO Chuanfeng
Pine Island Glacier, Swett Glacier, etc. are distributed in the basins of the Antarctic Ice Sheet 21 and 22, which is one of the areas with the most severe melting in the Southwest Antarctica. This dataset first uses Cryosat-2 data (August 2010 to October 2018) to establish a plane equation in each regular grid, taking into account terrain items, seasonal fluctuations, backscattering coefficients, wave front width, lifting rails and other factors, and calculates the elevation change of ice cover surface in the grid through least square regression. In addition, we used ICESat-2 data (October 2018 to December 2020) to calculate the surface elevation change during the two periods by obtaining the elevation difference at the intersection of satellite lifting orbits in each regular grid. The spatial resolution of surface elevation change data in two periods is 5km × 5km, the file format is GeoTIFF, the projection coordinate is polar stereo projection (EPSG 3031), and it is named by the name of the satellite altimetry data used. The data can be opened using ArcMap, QGIS and other software. The results show that the average elevation change rate of the region from 2010 to 2018 is -0.34 ± 0.08m/yr, which belongs to the area with severe melting. The annual average elevation change rate from October 2018 to November 2020 is -0.38 ± 0.06m/yr, which is in an intensified state compared with CryoSat-2 calculation results.
YANG Bojin , HUANG Huabing , LIANG Shuang , LI Xinwu
Data content: Industrial added value of national economy (monthly) (2010-2021) Data source and processing method: obtain the original data of the third pole (China) industrial economy in 2010-2021 from the official website of the World Bank and Sina.com, and obtain the industrial economy data set in 2010-2021 (China) through data sorting, screening and cleaning. The data starts from 2010 to 2021 in Microsoft Excel (xls) format. Data quality description: excellent Data application achievements and prospects: provide effective reference as social, industrial and economic data
FU Wenxue
The 0.1 º aerosol optical thickness dataset (also known as the "Poles AOD Collection 1.0" aerosol optical thickness (AOD) dataset) in the polar regions from 2000 to 2020 was produced by combining Merra-2 mode data and MODIS satellite sensor AOD. The data covers the period from 2000 to 2020, with a daily time resolution, covering the "tri polar" (Antarctic, Arctic and Qinghai Tibet Plateau) region, and a spatial resolution of 0.1 degree. The verification of the measured stations shows that the relative deviation of the data is within 35%, which can effectively improve the coverage and accuracy of AOD in the polar region.
GUANG Jie GUANG Jie
The Qinghai-Tibet Engineering Corridor runs from Golmud to Lhasa. It passes through the core region of the Qinghai-Tibet Plateau and is an important passage connecting the interior and Tibet. The active layer thickness (ALT) is not only an important index to study the thermal state of ground in permafrost region, but also a key factor to be considered in the construction of permafrost engineering. The core of GIPL1.0 is kudryavtesv method, which takes into account the thermophysical properties of snow cover, vegetation and different soil layers. However, Yin Guoan et al. found that compared with kudryavtesv method, the accuracy of TTOP model is higher, so they improved the model in combination with freezing / thawing index. Through verification of field monitoring data, it was found that the simulation error of ALT is less than 50cm. Therefore, the ALT in the Qinghai Tibet project corridor is simulated by using the improved GIPL1.0 model, and the future ALT under the ssp2-4.5 climate change scenario is predicted.
NIU Fujun
(1) Data content: the annual mean Northern Annular mode index and the Northern Annular mode index from 1500 to 2000; (2) Data source and processing method: this data is independently produced by the author. It is based on PAGES2k data set and reconstructed by machine learning model (random forest, extreme tree, Light GBM and catboost). (3) Data quality description: the data set has high consistency with multiple instrumental data during the observed period, and the reconstruction is better. The data can be used to study the change and mechanism of the main atmospheric circulation in the northern and southern hemispheres on multiple time scales (interannual, interdecadal and multidecadal).
YANG Jiao
We utilized 12 datasets covering the period 900–1999 CE, including two summer temperature gridded datasets from the Qinghai–Tibetan Plateau, two summer temperature series from the Arctic, a summer temperature gridded dataset from the Arctic, six global gridded annual temperature reconstruction datasets, and a last millennium reanalysis dataset with seasonal resolution. We used the optimal information extraction method to reconstruct the summer temperature anomalies in the Qinghai-Tibet Plateau and the Arctic over the past millennium (900–1999 CE) with annual resolution. The range of the Qinghai-Tibetan Plateau is 27°N–36°N, 77°E–106°E, and the range of the Arctic is 60°N–90°N. The reconstruction target is the summer (June–August) temperature anomalies (with respect to 1961–1990 CE period) in the instrumental CRUTEM4v dataset. The data can be used to study the mechanism of temperature variability in the Qinghai-Tibetan Plateau and Arctic over the past millennium.
SHI Feng
(1) Data content: data set of Antarctic sea ice extent (Northernmost Latitude of Sea Ice Edge (NLSIE) [°N]) in the past 200 years; (2) Data source and processing method: the data is generated based on the statistical model using six annual resolution proxies (ice core MSA, accumulation rate, etc.); (3) Data quality description: annual resolution; Areas: Indian and western Pacific sector of the Southern Ocean (50 ° – 150 ° E, indwpac), Ross Sea (160 ° E – 140 ° W, RS), Amundsen Sea (90 ° – 140 ° W, as), Bellingshausen Sea (50 ° – 90 ° W, BS), Weddell Sea (50 ° W – 20 ° E, WS); (4) It can be used to study the interdecadal variability of Antarctic sea ice.
YANG Jiao
As a huge elevated surface and atmospheric heat source in spring and summer, the Qinghai Tibet Plateau (TP) has an important impact on regional and global climate and climate. In order to explore the thermal forcing effect of TP, the sensitivity test data set of sensible heat anomaly on the Qinghai Tibet Plateau was prepared. This data includes three groups of sensitivity tests: (1) in the fully coupled model cesm1.2.0, the plateau sensible heat is stronger CGCM from March to may in spring_ lar_ mon_ 3-12-2.nc and plateau thermal sensitivity are weak (CGCM)_ sma_ mon_ 3-12-2. Sensitivity test of NC; (2) In the single general circulation model cam4.0, the sensible heat of the plateau is stronger in spring (March may)_ lar_ Mon 3-8.nc and low sensible heat cam_ sma_ Mon3-8.nc sensitivity test. Including: 3D wind, potential height, air temperature, surface temperature, specific humidity, sensible heat flux, latent heat flux, precipitation and other conventional variables Space scope: global simulation results
DUAN Anmin
The data is an excel file, which includes four tables named as follows: Altay Snow DOC Time Series, Altay Snow Pit Data, Altay Snow MAC (absorption section) and Central Asia Mos Island Glacier BC, OC, DUST Data. Altay snow DOC table includes seven columns including sample number, sampling date, sampling time, sampling depth, DOC-PPM, BC-PPb and TN-PPM, and 47 sample data. Altay snow pit table includes 8 columns including snow pit number, sample number, sampling date, sampling time, sampling depth, DOC-PPM, BC-PPb and TN-PPM, and 238 sample data. Altay snow MAC table includes: sampling time, MAC and AAE, a total of three columns, and 46 sample data. The BC, OC and DUST data tables of glaciers in Central Asia's Muse Island include 8 columns: code no (sample number), Latitude (latitude), Longitude (longitude),/m a.s.l (altitude), snow type (snow type), BC, OC and DUST, which are analyzed by sampling time. There are 105 rows of data in total. Abbreviation explanation: DOC: Dissolved Organic Carbon MAC: mass absorption cross section BC: black carbon DUST: Dust OC: Organic carbon TN: Total Nitrogen PPM: ug g-1 (microgram per gram) PPb: ng g-1 (nanogram per gram)
ZHANG Yulan
The alpine region of Asia is the third pole in the world, and it is called the "Asian water tower". Affected by climate warming, glaciers continue to lose money, which has profoundly changed the supply-demand relationship of glacial water resources. In order to systematically understand the response of glaciers to climate change, the project reveals the relationship between the change of glacier material balance and climate factors through the sensitivity of glacier material balance. The data includes two maps: the sensitivity distribution map of material balance to temperature and precipitation and the climate sensitivity zoning. In the past 70 years, there have been significant differences in the evolution sequence of glacier material balance among mountain systems in the high mountain region of Asia. The glaciers in the Karakoram and West Kunlun regions have shown a stable state, and the material balance is a weak positive balance, while the Himalayas, Tianshan and Qilian Mountains have shown an accelerated trend after 1990. This is mainly due to the sensitivity of material balance to temperature and precipitation. The monthly scale material balance model is driven by 0.5 ° resolution era5 temperature and precipitation data, and the material balance calibration parameters of 43 monitored glaciers are 1 ° from 2000 to 2016 × The parameters are spatially constrained by the 1 ° aster material balance data, and the material balance sequences of 95085 glaciers in the high mountain region of Asia from 1951 to 2020 are reconstructed by using the method of extrapolation of spatial parameters. The sensitivity of glacier material balance to temperature (± 0.5K, ± 1K, ± 1.5k) and precipitation (± 10%, ± 20%, ± 30%) is analyzed, In combination with the influencing factors of glacier material balance (distribution of summer temperature, ratio of summer precipitation, distribution of glacier types, distribution of clear sky solar radiation in summer, etc.), the glacial climate sensitivity in the high mountain region of Asia is classified and divided into four categories, as shown in Fig. 4: the main control area of air temperature: the temperature is the main control factor of glacier material balance change, and precipitation occupies a secondary position; Precipitation control area: the glacier is mainly controlled by precipitation, and the temperature in the glacier area is lower than 0 ° C throughout the year; Temperature and precipitation control area of accumulated glacier in winter: refers to that the glacier is mainly supplied by precipitation in winter, and the change of material balance of the glacier is the result of the joint action of temperature and precipitation; Summer cumulative glacier temperature and precipitation control area: refers to the supply mode of glacier is summer precipitation, and the material balance of glacier is the result of the joint action of temperature and precipitation.
SHANGGUAN Donghui
The Qinghai-Tibet Engineering Corridor runs from Golmud to Lhasa. It passes through the core region of the Qinghai-Tibet Plateau and is an important passage connecting the interior and Tibet. As the primary parameter in the surface energy balance, the land surface temperature represents the degree of energy and water exchange between the earth and the atmosphere, and is widely used in the research of climatology, hydrology and ecology. The annual average surface land temperature is obtained by using the four day and night observations of Aqua and Terra. Therefore, the 8-day land surface temperature synthesis products MOD11A2 and MYD11A2 with a resolution of 1km were downloaded first, and then the data were batch projected by MRT (MODIS Reprojection Tool). Finally, the annual average MODIS land surface temperature data after 2010 was calculated by IDL.
NIU Fujun
The Qinghai Tibet Engineering Corridor starts from Golmud in the north and ends at Lhasa in the south. It passes through the core area of the Qinghai Tibet Plateau and is an important channel connecting the mainland and Tibet. Permafrost temperature is not only an important index to study ground thermal state in permafrost regions, but also a key factor to be considered in permafrost engineering construction. The core of GIPL1.0 is the Kudryavtesv method, which considers the thermophysical properties of snow cover, vegetation and different soil layers. However, Yin found that compared with the Kudryavtesv method, the accuracy of TTOP model was higher. Therefore, the model was improved in combination with the freezing/thawing index. Through the verification of field monitoring data, it was found that the simulation error of permafrost temperature was less than 1 ℃. Therefore, the improved GIPL1.0 model is used to simulate the permafrost temperature of the Qinghai Tibet project corridor, and predict the future permafrost temperature under the SSP2-4.5 climate change scenario.
NIU Fujun
The dataset is the remote sensing image data ofGF-1 satellite in the Qinghai-Tibet engineering corridor obtained by China High Resolution Earth Observation Center. After the fusion processing of multispectral and panchromatic bands, the image data with a spatial resolution of 2 m is obtained. In the process of obtaining ground vegetation information, the classification technology of combining object-oriented computer automatic interpretation and manual interpretation is adopted, The object-oriented classification technology is to collect adjacent pixels as objects to identify the spectral elements of interest, make full use of high-resolution panchromatic and multispectral data space, texture and spectral information to segment and classify, and output high-precision classification results or vectors. In actual operation, the image is automatically extracted by eCognition software. The main processes are image segmentation, information extraction and accuracy evaluation. After verification with the field survey, the overall extraction accuracy is more than 90%.
NIU Fujun
This data set includes five periods of lake transparency data, including 1995, 2002, 2005, 2010 and 2015. The data sources are: Landsat 5, Landsat 7 and Landsat 8. Method of use: It is convenient to measure the spectral reflectance. On the basis of analyzing the relationship between the spectral reflectance and the transparency measured synchronously, the semi empirical method is used to select the best band combination, establish the transparency algorithm of Qinghai Tibet Plateau lakes, and obtain the water transparency. The verification of measured points shows that the relative error of water transparency estimation is 35%.
SONG Kaishan
This data includes bacterial 16S ribosomal RNA gene sequence data from 25 lakes in the middle of the Qinghai Tibet Plateau. The sample was collected from July to August 2015, and the surface water was sampled three times with a 2.5 liter sampler. The samples were immediately taken back to the Ecological Laboratory of the Beijing Qinghai Tibet Plateau Research Institute, and the salinity gradient of the salt lake was 0.14~118.07 g/L. This data is the result of amplification sequencing. Concentrate the lake water to 0.22 at 0.6 atm filtration pressure μ The 16S rRNA gene fragment amplification primers were 515F (5 '- GTGCCAAGCCGCGGTAA-3') and 909r (5 '- GGACTACHVGGGTWTCTAAT-3'). The Illumina MiSeq PE250 sequencer was used for end-to-end sequencing. The original data was analyzed by Mothur software. The sequence was compared with the Silva128 database and divided into operation classification units (OTUs) with 97% homology. This data can be used to analyze the microbial diversity of lakes in the Qinghai Tibet Plateau.
KONG Weidong
This data includes the distribution data of soil bacteria in Namco region of the Qinghai Tibet Plateau, which can be used to explore the seasonal impact of fencing and grazing on soil microorganisms in Namco region. The sample was collected from May to September 2015, and the soil samples were stored in ice bags and transported back to the Ecological Laboratory of Beijing Institute of Qinghai Tibet Plateau Research; This data is the result of amplification sequencing, using MoBio Powersoil ™ Soil DNA was extracted with DNA isolation kit, and the primers were 515F (5 '- GTGCCAAGCGCCGGTAA-3') and 806R (5'GGACTACNVGGGTWTCTAAT-3 '). The amplified fragments were sequenced by Illumina Miseq PE250. The original data is analyzed by Qiime software, and then the similarity between sequences is calculated, and the sequences with a similarity of more than 97% are clustered into an OTU. The Greengenes reference library is used for sequence alignment to remove the sequence that only appears once in the database. The soil moisture content and soil temperature were measured by a soil hygrometer, and the soil pH was measured by a pH meter (Sartorius PB-10, Germany). The soil nitrate nitrogen (NO3 −) and ammonium nitrogen (NH4+) concentrations were extracted with 2 M KCl (soil/solution, 1:5), and analyzed with a Smartchem200 discrete automatic analyzer. This data set is of great significance to the study of soil microbial diversity in arid and semi-arid grasslands.
KONG Weidong
Data on soil bacterial diversity of grassland in Qinghai Tibet Plateau. The samples were collected from July to August 2017, including 120 samples of alpine meadow, typical grassland and desert grassland. The soil surface samples were collected and stored in ice bags, and then transported back to the ecological laboratory of the Beijing Qinghai Tibet Plateau Research Institute. The soil DNA was extracted by MO BIO PowerSoil DNA kit. The 16S rRNA gene fragment amplification primers were 515F (5 '- GTGCCAAGCCGGTAA-3') and 806R (5 ´ GGACTACNVGGGTWTCTAAT-3 ´). The amplified fragments were sequenced by Illumina Miseq PE250. The original data is analyzed by Qiime software, and the sequence classification is based on the Silva128 database. Sequences with a similarity of more than 97% are clustered into an operation classification unit (OTU). This data systematically compares the bacterial diversity of soil microorganisms in the Qinghai Tibet Plateau transect, which is of great significance to the study of the distribution of microorganisms in the Qinghai Tibet Plateau.
KONG Weidong
Data content: this data set is the historical archived satellite data of the domestic high score series (GF1 / 2 / 3 / 4) in the key river and lake research areas of the Qinghai Tibet Plateau from 2015 to 2020, which can cover the typical river and lake areas for effective monitoring. The time range of the data is from 2015 to 2020. Data source and processing method: the data are level 1 products. After equalizing radiation correction, the changes affecting the sensors are corrected by the equalizing functions of different detectors. Some data are based on the Landsat 8 images in the same period as the base map, and control points are selected for geometric correction of the images. Then, orthophoto correction is carried out based on DEM data, and band fusion processing is carried out for the corresponding data. Data quality description: the Gaofen series satellites are processed by the China Resources Satellite Application Center. There are raw data received by the satellite ground receiving station of the Chinese Academy of Sciences and processed products at all levels. Among them, level 1a (pre-processing level radiometric correction image product): image data processed by data analysis, uniform radiometric correction, noise removal, MTFC, CCD splicing, band registration, etc; And provide RPC files for satellite direct attitude orbit data production. Refer to the data website of China Resources Satellite Application Center for details. Data application achievements and prospects: the data are domestic high-resolution data with high resolution, which can be used to monitor the changes of the Qinghai Tibet Plateau as a water tower in Asia and the generated images, and test the accuracy of other data in the region
QIU Yubao
The data is the result of the prediction of Arctic sea ice density and sea ice coverage by the climate system model FGOALS independently developed by the project members. The correct selection of assimilation technology is an important factor for Arctic sea ice prediction. In the sea ice data assimilation technology, the singular value evolutionary interpolation Kalman filter (seik) is a relatively early but still commonly used filtering algorithm. However, due to the calculation of error covariance between all grid points, there is a false teleconnection error. Therefore, it is considered to develop a local filtering method to assimilate sea ice density and sea ice thickness. In the climate system model FGOALS, the project will initialize and process the sea ice thickness data retrieved by the European Space Agency (ESA) cryosat-2 and soil moisture and ocean salinity (SMOs) satellite remote sensing.
SONG Mirong
The data is the result of the prediction of Arctic sea ice density and sea ice coverage by the climate system model FGOALS independently developed by the project members. The correct selection of assimilation technology is an important factor for Arctic sea ice prediction. In the sea ice data assimilation technology, the singular value evolutionary interpolation Kalman filter (seik) is a relatively early but still commonly used filtering algorithm. However, due to the calculation of error covariance between all grid points, there is a false teleconnection error. Therefore, it is considered to develop a local filtering method to assimilate sea ice density and sea ice thickness. In the climate system model FGOALS, the project will initialize and process the sea ice thickness data retrieved by the European Space Agency (ESA) cryosat-2 and soil moisture and ocean salinity (SMOs) satellite remote sensing.
SONG Mirong
(1) Data content: data set of precipitation field of the three poles (Arctic, Antarctic and Qinghai Tibet Plateau) in the past millennium; (2) Data source and processing method: the data is independently produced by the author and is produced by assimilating the precipitation proxy data in the three polar regions through the paleoclimate data assimilation method; (3) Data quality description: there is a high degree of spatial-temporal consistency between the data set and the precipitation data sets measured by multiple instruments (correlation coefficient is above 0.35, P < 0.001; Nash efficiency coefficient is above 0.3). In addition, the correlation coefficient with multiple precipitation data series reconstructed based on proxy data is between 0.2 and 0.6 (P < 0.001); (4) It can be used to study the temporal and spatial changes of precipitation in the past millennium in the three polar regions.
FANG Miao
(1) Data content: Millennial temperature (near-surface air temperature anomaly based on the millinnial mean）datasets over the three poles, e.g., Arctic, Antarctic, and Qinghai-Tibet Plateau; (2) Data sources and processing methods: These datasets were produced by the authors themselves using the paleoclimate data assimilationand approach based on climatic proxies over the three poles; (3) Description of data quality: There are high spatio-temporal consistency between these datasets and several instrumental gridded temperature datasets (correlation coefficient above 0.6, p <0.001; Nash efficiency coefficient above 0.5). In addition, the correlations between these datasets and several proxy-based temperature series are between 0.4 and 0.8 (p <0.001). (4) Data application achievements and prospects: These datasets can be used to investigate the temporal and spatial variations in temperature over the three poles during the past millennium.
FANG Miao
In recent years, with the acceleration of the melting of the Antarctic ice sheet, a large amount of ice melt has formed on the surface of the ice sheet from 2000 to 2019. It is of great significance to study the material balance of the Antarctic ice sheet to deeply understand the spatial-temporal distribution and dynamic changes of the melt water on the Antarctic ice sheet. This data set is based on Landsat7 and landsat8 images with 30 m spatial resolution from 2000 to 2019. By using normalized water body index, Gabor filtering and morphological path opening operations, the ice melt grid data set is generated, and the grid water body mask is converted into vector data in ArcGIS. This data set is based on the 250m ice surface melt water data set of the Antarctic ice sheet melting area (Alexander Island, Antarctic Peninsula) from 2000 to 2019 extracted from Landsat images. The time is concentrated from December to February (Southern Hemisphere summer)
YANG Kang
According to the data of three future scenarios of CMIP5 (RCP2.6、RCP4.5、RCP8.5), the spatial variation characteristics and temporal variation trend of the global mean annual air temperature from 2006 to 2100 are analyzed. Under rcp2.6 scenario, the mean annual air temperature shows an increasing trend, with the growth rate ranging from 0.0 ° c/decade to 0.2 ° c/decade (P<0.05), the growth in high latitude regions is faster, ranging from 0.1 ° c/decade to 0.2 ° C / decade. Based on the spatial and temporal characteristics of the mean annual air temperature in the northern hemisphere in the 21st century, under different scenarios, the mean annual air temperature shows a warming trend, and the high latitudes show a more sensitive and rapid growth.
NIU Fujun
According to the inducing factors of potential thermal melting disasters (mainly thermal melting landslides) in the pan Arctic, including temperature (freezing and Thawing Environment), rainfall, snow cover, soil type, topography and landform, and underground ice content, based on the basic data provided by the big data resource database of the earth, machine learning methods (logic regression, random forest, artificial neural network, support vector machine, etc.) are adopted, and the currently interpreted thermal melting landslides in the northern hemisphere are taken as training samples, Finally, the zonation map of thermal melt disaster susceptibility (occurrence probability) in the pan Arctic was obtained. According to the sensitivity of driving factors, it is found that climate factors (temperature and rainfall) have the largest contribution to the occurrence and distribution of thermal melt disasters, followed by slope factors, and ice content and radiation also have a high contribution.
NIU Fujun
Firstly, the freeze thaw index is calculated by using the resampled crunep data, and then the permafrost area of circum-Arctic is predicted by the frozen number model after snow depth correction. The simulated pan Arctic permafrost area from 2000 to 2015 is 19.96 × 106 km2。 Places inconsistent with the distribution of Pan Arctic permafrost provided by the existing international snow and Ice Data Center are mainly located in island permafrost areas.
NIU Fujun
The global high-resolution simulated near sea surface temperature precipitation SST data set from 1990 to 2020 is from the latest cmip6 project. Cmip6 is the sixth climate model comparison program organized by the world climate research project (WCRP). Original data source: https://www.wcrp-climate.org/wgcm-cmip/wgcm-cmip6 。 The data set includes the global near ocean surface temperature (TMP), precipitation (PR) and sea surface temperature (TOS). The air temperature and precipitation data include the rectangular combination of shared social economic path (SSP) and representative concentration path (RCP) of four different experimental scenarios of scenario MIP in cmip6. (1) Ssp126: upgrade rcp2.6 scenario based on ssp1 (low forcing scenario) (radiation forcing will reach 2.6w/m2 in 2100). (2) Ssp245: upgrade rcp4.5 scenario based on SSP2 (moderate forcing scenario) (radiation forcing will reach 4.5 w / m2 in 2100). (3) Ssp370: a new rcp7.0 emission path based on ssp3 (medium forcing scenario) (radiation forcing will reach 7.0 w / m2 in 2100). (4) Ssp585: upgrade rcp8.5 scenario based on ssp5 (high forcing scenario) (ssp585 is the only SSP scenario that can make radiation forcing reach 8.5 w / m2 in 2100). SST data provides ssp126 scenario data.
YE Aizhong
The basic data of hydrometeorology, land use and DEM were collected through the National Meteorological Information Center, the hydrological Yearbook, the China Statistical Yearbook and the Institute of geographical science and resources of the Chinese Academy of Sciences. The distributed time-varying gain hydrological model (DTVGM) with independent intellectual property rights is adopted for modeling, and the Qinghai Tibet Plateau is divided into 10937 sub basins with a threshold of 100 square kilometers. The daily flow data of 14 flow stations in Heihe River, Yarlung Zangbo River, Yangtze River source, Yellow River source, Yalong River, Minjiang River and Lancang River Basin were selected to draft and verify the model. The daily scale Naxi efficiency coefficient is above 0.7 and the correlation coefficient is above 0.8. The actual evaporation simulation is basically consistent with the station observation published by the Meteorological Bureau. The model simulates the water cycle process from 1998 to 2017. After verification, the spatial and temporal distribution of the actual evaporation (including soil evaporation and plant transpiration) on the 0.01 degree daily scale in the whole Tibetan Plateau is given.
YE Aizhong
The basic data of hydrometeorology, land use and DEM were collected through the National Meteorological Information Center, the hydrological Yearbook, the China Statistical Yearbook and the Institute of geographical science and resources of the Chinese Academy of Sciences. The distributed time-varying gain hydrological model (DTVGM) with independent intellectual property rights is adopted for modeling, and the Qinghai Tibet Plateau is divided into 10937 sub basins with a threshold of 100 square kilometers. The daily flow data of 14 flow stations in Heihe River, Yarlung Zangbo River, Yangtze River source, Yellow River source, Yalong River, Minjiang River and Lancang River Basin were selected to draft and verify the model. The daily scale Naxi efficiency coefficient is above 0.7 and the correlation coefficient is above 0.8. The model simulates the water cycle process from 1998 to 2017, and gives the spatial and temporal distribution of 0.01 degree daily scale runoff in the whole Qinghai Tibet Plateau.
YE Aizhong
We propose an algorithm for ice fissure identification and detection using u-net network, which can realize the automatic detection of ice fissures of Typical Glaciers in Greenland ice sheet. Based on the data of sentinel-1 IW from July and August every year, in order to suppress the speckle noise of SAR image, the probabilistic patch based weights (ppb) algorithm is selected for filtering, and then the representative samples are selected and input into the u-net network for model training, and the ice cracks are predicted according to the trained model. Taking two typical glaciers in Greenland (Jakobshavn and Kangerdlussuaq) as examples, the average accuracy of classification results can reach 94.5%, of which the local accuracy of fissure area can reach 78.6%, and the recall rate is 89.4%.
LI Xinwu , LIANG Shuang , YANG Bojin , ZHAO Jingjing
We propose an algorithm for ice crack identification and detection using u-net network, which can realize the automatic detection of Antarctic ice cracks. Based on the data of sentinel-1 EW from January to February every year, in order to suppress the speckle noise of SAR image, the probabilistic patch based weights (ppb) algorithm is selected for filtering, and then representative samples are selected and input into the u-net network for model training, and the ice cracks are predicted according to the trained model. Taking five typical ice shelves（Amery、Fimbul、Nickerson、Shackleton、Thwaiters) in Antarctica as an example, the average accuracy of classification results can reach 94.5%, of which the local accuracy of fissure area can reach 78.6%, and the recall rate is 89.4%.
LI Xinwu , LIANG Shuang , YANG Bojin , ZHAO Jingjing
In order to better understand the mechanism of the interaction between the global climate and the Fimbu and Jelbart ice shelves, it is important to obtain the long-term ice velocity changes in this region. 1960-1980s Ice Flow Velocity Field Data Product Set of the Fimbul and Jelbart Ice Shelves, East Antarctica: Using the early Argon, Landsat MSS and TM satellite images, based on pre-processing the early remote sensing images to obtain the orthophoto images with precise geometric status, a layered matching method under the constraint strategy of artificial point feature point grid point was proposed, and the historical ice flow velocity field data product of the Fimbul Jelbart Ice Shelf, East Antarctica was extracted. This study is of great significance for studying the historical ice velocity of the Fimbul Jelbart Ice Shelf in East Antarctica from 1963 to 1987, and can provide basic data for studying the response of the ice sheet to global climate change.
LI Rongxing , FENG Tiantian , LI Yanjun , CHENG Yuan , QIAO Gang
Global solar radiation and diffuse horizontal solar radiation at Dome C (Antarctica) are measured by radiation sensors (pyranometers CM22, Kipp & Zonen Inc., The Netherlands), and water vapor pressure (hPa) at the ground are obtained from the IPEV/PNRA Project “Routine Meteorological Observation at Station Concordia”, http://www.climantartide.it. This dataset includes hourly solar radiation and its absorbing and scattering losses caused by the absorbing and scattering atmospheric substances (MJ m-2, 200-3600 nm), and the albedos at the top of the atmosphere and the surface. The above solar radiations are calculated by using an empirical model of global solar radiation (Bai, J.; Zong, X.; Lanconelli, C.; Lupi, A.; Driemel, A.; Vitale, V.; Li, K.; Song, T. 2022. Long-Term Variations of Global Solar Radiation and Its Potential Effects at Dome C (Antarctica). Int. J. Environ. Res. Public Health, 19, 3084. https://doi.org/10.3390/ijerph19053084). The observed global solar radiation and meteorological parameters are available at https://doi.org/10.1594/PANGAEA.935421. The data set can be used to study solar radiation and its attenuation at Dome C, Antarctica.
BAI Jianhui
Global solar radiation at Qomolangma station (The Tibetan Plateau) is measured by radiation sensor (pyranometers CM22, Kipp & Zonen Inc., The Netherlands), and water vapor pressure (hPa) at the ground is measured by HMP45C-GM (Vaisala Inc., Vantaa, Finland). This dataset includes hourly solar radiation and its absorbing and scattering losses caused by the absorbing and scattering atmospheric substances (MJ m-2, 200-3600 nm), and the albedos at the top of the atmosphere and the surface. The above solar radiations are calculated by using an empirical model of global solar radiation (Bai, J.; Zong, X.; Ma, Y.; Wang, B.; Zhao, C.; Yang, Y.; Guang, J.; Cong, Z.; Li, K.; Song, T. 2022. Long-Term Variations in Global Solar Radiation and Its Interaction with Atmospheric Substances at Qomolangma. Int. J. Environ. Res. Public Health, 19, 8906. https://doi.org/10.3390/ijerph19158906). The observed global solar radiation and meteorological variables are available at https://data.tpdc.ac.cn/zh-hans/data/b9ab35b2-81fb-4330-925f-4d9860ac47c3/. The data set can be used to study solar radiation and its attenuation at Qomolangma region.
BAI Jianhui
The data product of ice flow velocity field of Rayner Glacier in East Antarctica in 1963 based on ARGON historical remote sensing images. Using two declassified satellite images taken in 1963 with an interval of two months, the early ice flow velocity field of the Reina Glacier in eastern Antarctica is estimated by hierarchical matching based on parallax decomposition. The accuracy of the estimated velocity map can reach 70 m/year. A method for estimating the surface velocity of cooperative glaciers based on the parallax decomposition of optical stereo images. First, the image to be matched generates the core image and the pyramid of the core image; Next, the ice flow area mask is used to divide the image into ice flow area and non ice flow area for matching respectively. In addition to the normal matching steps, the ice flow area also needs to perform parallax demarcation to distinguish the impact of ice flow movement on terrain parallax. Finally, through layer by layer matching, we can get the DTM and ice flow diagram of the object side at the bottom. This data is of great significance for reconstructing the early surface morphology and ice flow velocity of Rayner Glacier in East Antarctica.
LI Rongxing , QIAO Gang , YE Wenkai
Aerosol Optical Depth (AOD) reflects the attenuation of solar radiation to the surface by aerosols. The aerosol type is calculated according to the aerosol optical thickness (AOD). This data set is derived from the latest MODIS aerosol secondary product MOD04_ L2 and MYD04_ L2, where MOD and MYD represent Terra and Aqua satellites respectively. At present, MODIS aerosol retrieval algorithms are Dark Target (DT) and Deep Blue (DB). According to the inversion accuracy of the metadata field table Quality Assurance Confidence (QAC), DT and DB algorithm products are integrated to deal with land, ocean and coast respectively. The index quality is optimal (QAF=3) or suboptimal (QAF=2) or meets the basic needs (QAF=1) to obtain high-resolution AOD products (0.1 degree, daily scale) with full coverage and long time series. According to AOD experience threshold (AOD: 0~0.2, clean type; 0.2~0.6, urban or industrial type; greater than 0.6, sand dust type) The aerosol types are classified into three types: clean type (1), urban or industrial type (2) and sand dust type (3). This dataset provides MOD, MYD and fusion products based on transit time.
YE Aizhong
Aerosol Optical Depth (AOD) reflects the attenuation of solar radiation to the surface by aerosols. This data set is derived from the latest MODIS aerosol secondary product MOD04_ L2 and MYD04_ L2, where MOD and MYD represent Terra and Aqua satellites respectively. At present, MODIS aerosol retrieval algorithms are Dark Target (DT) and Deep Blue (DB). According to the inversion accuracy of the metadata field table Quality Assurance Confidence (QAC), DT and DB algorithm products are integrated to deal with land, ocean and coast respectively. The index quality is optimal (QAF=3) or suboptimal (QAF=2) or meets the basic needs (QAF=1) to obtain high-resolution AOD products (0.1 degree, daily scale) with full coverage and long time series. This dataset provides MOD, MYD and fusion products based on transit time.
YE Aizhong
The data set of bacterial post-treatment products and conventional water quality parameters of some lakes in the third pole in 2015 collected the bacterial analysis results and conventional water quality parameters of some lakes in the Qinghai Tibet Plateau during 2015. Through sorting, summarizing and summarizing, the bacterial post-treatment products of some lakes in the third pole in 2015 are obtained. The data format is excel, which is convenient for users to view. The samples were collected by Mr. Ji mukan from July 1 to July 15, 2015, including 28 Lakes (bamuco, baimanamuco, bangoso (Salt Lake), Bangong Cuo, bengcuo, bieruozhao, cuo'e (Shenza), cuo'e (Naqu), dawaco, dangqiong Cuo, dangjayong Cuo, Dongcuo, eyaco, gongzhucuo, guogencuo, jiarehbu Cuo, mabongyong Cuo, Namuco, Nier CuO (Salt Lake), Norma Cuo, Peng yancuo (Salt Lake), Peng Cuo, gun Yong Cuo, Se lincuo, Wu rucuo, Wu Ma Cuo, Zha RI Nan Mu Cuo, Zha Xi CuO), a total of 138 samples. The extraction method of bacterial DNA in lake water is as follows: the lake water is filtered onto a 0.45 membrane, and then DNA is extracted by Mo bio powerOil DNA kit. The 16S rRNA gene fragment amplification primers were 515f (5'-gtgccagcmgcgcggtaa-3') and 909r (5'-ggactachvggtwtctaat-3'). The sequencing method was Illumina miseq PE250. The original data were analyzed by mothur software, including quality filtering and chimera removal. The sequence classification was based on the silva109 database. The archaeal, eukaryotic and unknown source sequences had been removed. OTU classifies with 97% similarity and then removes sequences that appear only once in the database. Conventional water quality detection parameters include dissolved oxygen, conductivity, total dissolved solids, salinity, redox potential, nonvolatile organic carbon, total nitrogen, etc. The dissolved oxygen is determined by electrode polarography; Conductivity meter is used for conductivity; Salinity is measured by a salinity meter; TDS tester is used for total dissolved solids; ORP online analyzer was used for redox potential; TOC analyzer is used for non-volatile organic carbon; The water quality parameters of total nitrogen were obtained by Spectrophotometry for reference.
YE Aizhong
The data set includes the observed and simulated runoff into the sea and the composition of each runoff component (total runoff, glacier runoff, snowmelt runoff, rainfall runoff) of two large rivers in the Arctic (North America: Mackenzie, Eurasia: Lena), with a time resolution of months. The data is a vic-cas model driven by the meteorological driving field data produced by the project team. The observed runoff and remote sensing snow data are used for correction. The Nash efficiency coefficient of runoff simulation is more than 0.85, and the model can also better simulate the spatial distribution and intra/inter annual changes of snow cover. The data can be used to analyze the runoff compositions and causes of long-term runoff change, and deepen the understanding of the runoff changes of Arctic rivers.
ZHAO Qiudong, WU Yuwei
This product provides the data set of key variables of the water cycle of major Arctic rivers (North America: Mackenzie, Eurasia: Lena from 1971 to 2017, including 7 variables: precipitation, evapotranspiration, surface runoff, underground runoff, glacier runoff, snow water equivalent and three-layer soil humidity, which are numerically simulated by the land surface model vic-cas developed by the project team. The spatial resolution of the data set is 0.1degree and the temporal resolution is month. This data set can be used to analyze the change of water balance in the Arctic River Basin under long-term climate change, and can also be used to compare and verify remote sensing data products and the simulation results of other models.
ZHAO Qiudong, WANG Ninglian, WU Yuwei
This product provides the data set of key variables of the water cycle of Arctic rivers (North America：Mackenzie, Eurasia：Lena) from 1998 to 2017, including 7 variables: precipitation, evapotranspiration, surface runoff, underground runoff, glacier runoff, snow water equivalent and three-layer soil humidity, which are numerically simulated by the land surface model vic-cas developed by the project team. The spatial resolution of the data set is 50km and the temporal resolution is month. This data set can be used to analyze the change of water balance in the Arctic River Basin under climate change, and can also be used to compare and verify remote sensing data products and the simulations of other models.
ZHAO Qiudong, WANG Ninglian, WU Yuwei
The microbial reprocessing products of polar ice and snow in typical years collected the analysis results of bacteria sampled from glaciers, Glacial Snow and ice in the polar regions and the Qinghai Tibet Plateau from 2010 to 2018. Through sorting, summarizing and summarizing, the post-processing data products of soil microorganisms in the three pole region are obtained, and the data format is excel, which is convenient for users to view. Among them, the prokaryotes of Glacial Snow and ice in the polar regions and Qinghai Tibet Plateau are the sequences of bacterial 16S ribosomal RNA gene collected by teacher Liu Yongqin's experimental group from NCBI database from 2010 to 2018. The collected sequences calculate the similarity between sequences by using dotour software. Sequences with a similarity of more than 97% are clustered into an OTU, and OTU representative sequences are defined. OTU representative sequences were compared with RDP database through "Classifier" software, and were identified to the first level when the reliability was greater than >80%; The glaciers on the Qinghai Tibet Plateau were collected from 2010 to 2018, including the bacterial 16S ribosomal RNA gene sequence of seven glaciers on the Qinghai Tibet Plateau (East Rongbu glacier on Mount Everest, Tianshan No. 1 glacier, Guliya glacier, Laohugou glacier, muzitang glacier, July 1st glacier and yuzhufeng glacier) isolated by teacher Liu Yongqin's experimental group, Malan glacier isolated by teacher Xiang Shurong and ruogangri glacier isolated by teacher Zhang Xinfang. Glacier samples were collected and brought back to the ecological Laboratory of the Institute of Qinghai Tibet Plateau Research in Beijing and the Lanzhou cryosphere National Laboratory. After coating the plate, it was cultured at different temperatures (4-25 ℃) for 20-90 days, and a single colony was picked for purification. The isolated bacteria extracted DNA, amplified 16S ribosomal RNA gene fragments with 27f/1492r primers, and sequenced with Sanger method. 16S ribosomal RNA gene sequence was compared with RDP database through "Classifier" software, and was identified to the first level when the reliability was greater than >80%.
YE Aizhong
The three pole soil microbial post-treatment products in typical years collected the distribution and analysis results of soil samples from the north and south polar regions from 2005 to 2006 and the distribution and analysis results of soil samples from the Qinghai Tibet Plateau in 2015. Through sorting and summarizing, the post-processing data products of soil microorganisms in the three pole region are obtained. The data format is excel, which is convenient for users to view. Among them, the collection time of samples from the north and south polar regions was from December 13, 2005 to December 8, 2006, including 52 samples from three regions in the Arctic (Spitsbergen slijeringa, Spitsbergen vestpynten, and Alexandra fjord Highlands), and 171 samples from five regions in the Antarctic (Mitchell Peninsula, Casey station main power house, Robinson ridge, herring Island, browning Peninsula); The Qinghai Tibet Plateau was collected from July 1 to July 15, 2015, including meadow, grassland and desert ecosystems. There were 18 sampling points in total, and the number of samples at each sampling point was 3-5. The precipitation, air temperature and drought degree of the sampling point are estimated from the meteorological information for reference. The soil surface samples were collected and stored in liquid nitrogen, then transported back to the Sydney Laboratory for extraction by fastprep DNA kit. The extracted DNA samples were amplified with the 16S rRNA gene fragment using 27F (5'-gagttttgatcntggctca-3') and 519r (5'-gtnttacngcgckctg-3'). The amplified fragments were sequenced by 454 method, and the original data were analyzed by mothur software. The sequences with poor sequencing quality were first removed, and then the chimeric sequences were sequenced and removed. After that, the similarity between sequences is calculated. Sequences with a similarity of more than 97% are clustered into one OTU, and OTU representative sequences are defined. The OTU representative sequences were aligned with the Silva database, and were identified to belong to the first level when the reliability was greater than 80%.
YE Aizhong
The fractional snow cover (FSC) is the ratio of snow cover area (SCA) to unit pixel area. The data set is made by bv-blrm snow area proportional linear regression empirical model; The source data used are mod09ga 500m global daily surface reflectance products and mod09a1 500m 8-day synthetic global surface reflectance products; The production platform uses Google Earth engine; The data range is global, the data preparation time is from 2000 to 2021, the spatial resolution is 500 meters, and the temporal resolution is year by year. This set of data can provide quantitative information of snow cover distribution for regional climate simulation and hydrological models.
MA Yuan
Zoige Wetland observation point is located at Huahu wetland (102 ° 49 ′ 09 ″ E, 33 ° 55 ′ 09 ″ N) in Zoige County, Sichuan Province, with an initial altitude of 3435 m. The underlying surface is the alpine peat wetland, with well-developed vegetation, water and peat layer. This data set is the meteorological observation data of Zoige Wetland observation point from 2017 to 2019. It is obtained by using Kipp&Zonen CNR4, Vaisala HMP155A, PTB110 and other instruments. The time resolution is half an hour, mainly including wind speed, wind direction, air temperature, relative humidity, air pressure, downward short wave radiation, downward long wave radiation.
MENG Xianhong, LI Zhaoguo
This data set is the conventional meteorological observation data of Maqu grassland observation site in the source region of the Yellow River from 2017 to 2020, obtained by using Kipp&Zonen CNR4, Vaisala HMP155A, PTB110 and other instruments, with a time resolution of half an hour. Mainly include wind speed, wind direction, temperature, relative humidity, air pressure, downward short-wave radiation, downward long-wave radiation, precipitation.
MENG Xianhong, LI Zhaoguo
The high-resolution atmosphere-hydrologic simulation dataset over Tibetan Plateau is prepared by WRFv4.1.1 model with grids of 191 * 355 and spatial resolution of 9 km, and a spatial range covering the entire plateau. The main physics schemes are configured with Thompson microphysics scheme, the rapid radiative transfer model (RRTM), and the Dudhia scheme for longwave and shortwave radiative flux calculations, respectively, the Mellor-Yamada-Janjic (MYJ) TKE scheme for the planetary boundary layer and the Unified Noah Land Surface Model. The time resolution is 3h and the time span is 2000-2010. Variables include: precipitation (Rain), temperature (T2) and water vapor (Q2) at 2m height on the ground, surface skin temperature (TSK), ground pressure (PSFC), zonal component (U10) and meridional component (V10) at 10m heigh on the ground, downward long-wave flux (GLW) and downward short-wave flux (SWDOWN) at surface, ground heat flux (GRDFLX), sensible heat flux (HFX), latent heat flux (LH), surface runoff (SFROFF) and underground runoff (UDROFF). The data can effectively support the study of regional climate characteristics, climate change and its impact over the Tibet Plateau, which will provide scientific basis for the sustainable development of the TP under the background of climate change.
MENG Xianhong, MA Yuanyuan
This data set is the conventional meteorological observation data of the Ngoring Lake Grassland Observation site (GS) in the source region of the Yellow River from 2017 to 2020, obtained by using Kipp&Zonen CNR4, Vaisala HMP155A, PTB110 and other instruments, with a time resolution of half an hour. Mainly include wind speed, wind direction, temperature, relative humidity（specific humidity in 2020）, air pressure, downward short-wave radiation, downward long-wave radiation, precipitation.
MENG Xianhong, LI Zhaoguo
The normalized difference vegetation index (NDVI) can accurately reflect the surface vegetation coverage. At present, NDVI time series data based on spot / vegetation and MODIS satellite remote sensing images have been widely used in the research of vegetation dynamic change monitoring, land use / cover change detection, macro vegetation cover classification and net primary productivity estimation at various scales. Evi is similar to the normalized difference vegetation index (NDVI) and can be used to quantify vegetation greenness. However, evi corrects for some atmospheric conditions and canopy background noise and is more sensitive in areas with dense vegetation. It contains an "L" value to adjust the canopy background, a "C" value as the atmospheric drag coefficient, and a value from the blue band (b). These enhancements allow the ratio between R and NIR values to be calculated exponentially while reducing background noise, atmospheric noise and saturation in most cases. This research work mainly focuses on post-processing NDVI and evi data, and gives a more reliable vegetation situation of the Qinghai Tibet Plateau in 2013 and 2018 through transformation of projection coordinate system, data fusion, maximum value synthesis method, elimination of outliers and clipping. The spatial resolution of the data is 0.05 °, and the temporal resolution is month.
YE Aizhong
Fractional Vegetation Cover (FVC) refers to the percentage of the vertical projected area of vegetation to the total area of the study area. It is an important indicator to measure the effectiveness of ecological protection and ecological restoration. It is widely used in the fields of climate, ecology, soil erosion and so on. FVC is not only an ideal parameter to reflect the productivity of vegetation, but also can play a good role in evaluating topographic differences, climate change and regional ecological environment quality. This research work is mainly to post process two sets of glass FVC data, and give a more reliable vegetation coverage of the circumpolar Arctic Circle (north of 66 ° n) and the Qinghai Tibet Plateau (north of 26 ° n to 39.85 °, east longitude 73.45 ° to 104.65 °) in 2013 and 2018 through data fusion, elimination of outliers and clipping.
YE Aizhong
NDVI reflects the background effects of plant canopy, such as soil, wet ground, snow, dead leaves, roughness, etc., and is related to vegetation cover. It is one of the important parameters to reflect the crop growth and nutrient information. According to this parameter, the N demand of crops in different seasons can be known, which is an important guide to the reasonable application of N fertilizer. Correct NDVI (C-NDVI) is the value of NDVI after excluding the influence of climate elements (temperature, precipitation, etc.) on NDVI. Taking precipitation as an example, studies on the lag effect of precipitation on vegetation growth show that the lag time of precipitation effects varies in different regions due to differences in vegetation composition and soil types. In this study, we post-processed the MODIS NDVI data and firstly correlated the NDVI value of the current month with the precipitation of the current month, the average value of the precipitation of the current month with that of the previous month, and the average value of the precipitation of the current month with that of the previous two months to determine the optimal lag time. The NDVI was regressed on precipitation and air temperature to obtain the correlation coefficients, and then the corrected NDVI values were calculated by the difference between the MODIS NDVI and the NDVI regressed on climate factors. We corrected NDVI using climate data to give reliable vegetation correction indices for the circum-Arctic Circle (range north of 66°N) and the Tibetan Plateau (range 26°N to 39.85°N and 73.45°E to 104.65°E) for 2013 and 2018. The spatial resolution of the data is 0.5 degrees and the temporal resolution is monthly values.
YE Aizhong
The vegetation data of the Antarctic Peninsula were obtained from the Antarctic Pioneer vegetation cover classification data of the spatio-temporal three-level environmental big data platform by applying pure image element PPI to extract the end element spectra of mosses, lichens, rocks, sea and snow and applying the linear Mixture Model (LMM) to calculate them. The characteristic vegetation cover of the Fildes Peninsula was obtained based on its correlation with the linear relationship of abundance. The data format is geotiff format. The data content is the vegetation cover of the typical zone of the Antarctic Peninsula in a typical year. In this research work, tif raster format products were generated by post-processing the typical annual vegetation cover of the typical area of the Antarctic Peninsula, and the value of the main body of the raster is the vegetation cover. The vegetation cover of the Antarctic Peninsula typical area obtained in this study is a mosaic of Antarctic pioneer plant abundance data products, including the plant abundance data products in and around the Antarctic Peninsula. The typical area of the Antarctic Peninsula including Adley, north and south were mosaicked by ArcGIS to obtain six vegetation cover maps identified by spectral angle matching method (SAM) and spectral information scatter method (SID) including 2008, 2017 and 2018.
YE Aizhong
The thickness of the active layer of the three pole permafrost combines two sets of data products. The main reference data is the annual value of the active layer thickness from 1990 to 2015 generated by GCM model simulation. The data format of this data set is netcdf4 format, with a spatial resolution of 0.5 ° and a temporal resolution of years. The reference correction data set is the average value of active layer thickness from 2000 to 2015 simulated by statistical and machine learning (ML) methods. The data format is GeoTIFF format, the spatial resolution is 0.1 °, and the data unit is m. Through post-processing operations such as data format conversion, spatial interpolation, data correction, etc., this research work generates the permafrost active layer thickness data in netcdf4 format, with a spatial resolution of 0.1 °, a temporal resolution of years, a time range of 1990-2015, and a data unit of CM.
YE Aizhong
The original data of carbon flux in the three pole permafrost region are generated by GCM model simulation, and the original data are from http://www.cryosphere.csdb.cn/portal/metadata/5abef388-3f3f-4802-b3de-f4d233cb333b 。 This data set contains the prediction of future scenarios under different representative concentration paths (RCPs) in the next 2046-2065 years, including rcp2.6 scenario, rcp4.5 scenario and rcp8.5 scenario. The original data include parameters representing carbon flux such as NPP and GPP in the permafrost region of the Qinghai Tibet Plateau. The data format is netcdf4 format, with a spatial resolution of 0.5 ° and a temporal resolution of years. Through data format conversion, spatial interpolation and other post-processing operations, the NPP and GPP data in permafrost region in netcdf4 format are generated. The spatial resolution is 0.1 °, the time resolution is years, the time range is 2046-2065, and the data unit is gc/m2yr.
YE Aizhong
The original thickness data of the active layer of the three pole permafrost are generated by GCM model simulation, and the original data are from http://www.cryosphere.csdb.cn/portal/metadata/5abef388-3f3f-4802-b3de-f4d233cb333b 。 This data set contains the prediction of future scenarios under different representative concentration paths (RCPs) in the next 2046-2065 years, including rcp2.6 scenario, rcp4.5 scenario and rcp8.5 scenario. The content of the original data is the thickness of the active layer in the permafrost area of the Qinghai Tibet Plateau. The data format is netcdf4, with a spatial resolution of 0.5 ° and a temporal resolution of years. Through data format conversion, spatial interpolation and other post-processing operations, the active layer thickness in permafrost area in netcdf4 format is generated, with a spatial resolution of 0.1 °, a time resolution of years, a time range of 2046-2065, and the unit is cm.
YE Aizhong
The original data of the three pole permafrost range are generated by GCM model simulation, and the original data are from http://www.cryosphere.csdb.cn/portal/metadata/5abef388-3f3f-4802-b3de-f4d233cb333b 。 This data set contains the prediction of future scenarios under different representative concentration paths (RCPs) in the next 2046-2065 years, including rcp2.6 scenario, rcp4.5 scenario and rcp8.5 scenario. The original data content is the spatial range of permafrost and seasonal frozen soil in the Qinghai Tibet Plateau. The data format is netcdf4 format, with a spatial resolution of 0.5 ° and a temporal resolution of years. Through data format conversion, spatial interpolation and other post-processing operations, this research work generates the permafrost range data in netcdf4 format, with a spatial resolution of 0.1 °, a time resolution of years, and a time range of 2046-2065. Permafrost is represented by 1, and seasonal permafrost is represented by 0.
YE Aizhong
The Qinghai Tibet Plateau is known as the "Asian water tower", and its runoff, as an important and easily accessible water resource, supports the production and life of billions of people around, and supports the diversity of ecosystems. Accurately estimating the runoff of the Qinghai Tibet Plateau and revealing the variation law of runoff are conducive to water resources management and disaster risk avoidance in the plateau and its surrounding areas. The glacier runoff segmentation data set covers the five river source areas of the Qinghai Tibet Plateau from 1971 to 2015, with a time resolution of year by year, covering the five river source areas of the Qinghai Tibet Plateau (the source of the Yellow River, the source of the Yangtze River, the source of the Lancang River, the source of the Nujiang River, and the source of the Yarlung Zangbo River), and the spatial resolution is the watershed. Based on multi-source remote sensing and measured data, it is simulated using the distributed hydrological model vic-cas coupled with the glacier module, The simulation results are verified with the measured data of the station, and all the data are subject to quality control.
WANG Shijin
As an important part of the global carbon pool, Arctic permafrost is one of the most sensitive regions to global climate change. The rate of warming in the Arctic is twice the global average, causing rapid changes in Arctic permafrost. The NDVI change data set of different types of permafrost regions in the Northern Hemisphere from 1982 to 2015 has a temporal resolution of every five years, covers the entire Arctic Rim countries, and a spatial resolution of 8km. Based on multi-source remote sensing, simulation, statistics and measured data, GIS method and ecological method are used to quantify the regulation and service function of permafrost in the northern hemisphere to the ecosystem, and all the data are subject to quality control.
WANG Shijin
Known as the "Asian water tower", the Qinghai Tibet Plateau is the source of many rivers in Southeast Asia. As an important and easily accessible water resource, the runoff provided by it supports the production and life of billions of people around it and the diversity of the ecosystem. The glacier runoff data set in the five river source areas of the Qinghai Tibet Plateau covers the period from 2005 to 2010, with a time resolution of every five years. It covers the source areas of the five major rivers in the Qinghai Tibet Plateau (the source of the Yellow River, the source of the Yangtze River, the source of the Lancang River, the source of the Nujiang River, and the source of the Yarlung Zangbo River). The spatial resolution is 1km. Based on multi-source remote sensing, simulation, statistics, and measured data, GIS methods and ecological economics methods are used, The value of water resources service in the cryosphere in the source area of the river and river is quantified, and all its data are subject to quality control.
WANG Shijin
This product provides the monthly runoff, evapotranspiration and soil water of major Arctic river basins in 2018-2065 based on the land surface model Vic. The spatial accuracy is 10km. Major Arctic river basins include Lena, Yenisey, ob, Kolyma, Yukon and Mackenzie basins. According to the rcp2.6 (low emission intensity) and rcp8.5 (high emission intensity) scenario results provided by the ipsl-cm5a-lr model in cmip5 in the fifth assessment report of IPCC, the future climate scenario driving data applicable to the Arctic region of 0.1 ° is obtained through statistical downscaling. Using the calibrated land surface hydrological model Vic on a global scale, based on the future climate scenario driven data of 0.1 °, the monthly time series of runoff, soil water and evapotranspiration of the Arctic River Basin in the middle of this century under future climate change are estimated.
TANG Yin , TANG Qiuhong , WANG Ninglian, WU Yuwei
Different forms of precipitation (snow, sleet, and rain) have divergent effects on the Earth’s surface water and energy fluxes. Therefore, discriminating between these forms is of significant importance, especially under a changing climate. We applied a state-of-the-art parameterization scheme with wet-bulb temperature, relative humidity, surface air pressure, and elevation as inputs, as well as observational gridded datasets with a maximum spatial resolution of 0.25◦, to generate a gridded dataset of different forms of daily precipitation (snow, sleet, and rain) and their temperature threshold across mainland China from 1961-2016. The annual snow, sleet, and rain amount were further calculated. The dataset may benefit various research communities, such as cryosphere science, hydrology, ecology, and climate change.
SU Bo , ZHAO Hongyu
Mountain glaciers are important freshwater resources in Western China and its surrounding areas. It is at the drainage basin scale that mountain glaciers provide meltwater that humans exploit and utilize. Therefore, the determination of glacierized river basins is the basis for the research on glacier meltwater provisioning functions and their services. Based on the Randolph glacier inventory 6.0, Chinese Glacier Inventories, China's river basin classifications (collected from the Data Centre for Resources and Environmental Sciences, Chinese Academy of Sciences), and global-scale HydroBASINS (www.hydrosheds.org), the following dataset was generated by the intersection between river basins and glacier inventory: (1) Chinese glacierized macroscale and microscale river basins; (2) International glacierized macroscale river basin fed by China’s glaciers; (3) Glacierized macroscale river basin data across High Mountain Asia. This data takes the common river basin boundaries in China and the globe into account, which is poised to provide basic data for the study of historical and future glacier water resources in China and its surrounding areas.
SU Bo
Soil freezing depth (SFD) is necessary to evaluate the balance of water resources, surface energy exchange and biogeochemical cycle change in frozen soil area. It is an important indicator of climate change in the cryosphere and is very important to seasonal frozen soil and permafrost. This data is based on Stefan equation, using the daily temperature prediction data and E-factor data of canems2 (rcp45 and rcp85), gfdl-esm2m (rcp26, rcp45, rcp60 and rcp85), hadgem2-es (rcp26, rcp45 and rcp85), ipsl-cm5a-lr (rcp26, rcp45, rcp60 and rcp85), miroc5 (rcp26, rcp45, rcp60 and rcp85) and noresm1-m (rcp26, rcp45, rcp60 and rcp85), The data set of annual average soil freezing depth in the Qinghai Tibet Plateau with a spatial resolution of 0.25 degrees from 2007 to 2065 was obtained.
PAN Xiaoduo, LI Hu
1) Data content: spatial and temporal dataset of near-surface monthly air temperature of Antarctic ice sheet from 2001 to 2018。 2) Data source and processing method: MODIS (MODerate resolution Imaging Spectroradiometer) Land Surface Temperature measurements in combination with in-situ air temperature records from 119 meteorological stations are used to reconstruct a monthly near-surface air temperature product over the Antarctic Ice Sheet (AIS) by means of a neural network model. The product is generated on a regular grid of 0.05°×0.05°, spanning from 2001 to 2018. 3) Data quality description: the accuracy is better than that of ERA5 reanalysis data. 4) Data application achievements and prospects: the database can be used to study the temporal and spatial distribution characteristics of near-surface air temperature of Antarctic ice sheet, and the impact of SAM and ENSO on the interannual variation of Antarctic temperature. In addition, the dataset has the potential application for climate model validation and data assimilation due to the independence of the input of a numerical weather prediction model.
ZHANG Xueying
The data set is the monthly average temperature data of China's multi scenario and multi-mode, with a spatial resolution of 0.0083333 ° (about 1km) from January 2021 to December 2100. The data is in NetCDF format. The data is generated in China through the delta spatial downscaling scheme according to the global > 100 km climate model data set released in the sixth phase of the IPCC coupled model comparison program (cmip6) and the global high-resolution climate data set released by worldclim. The data adopts the latest SSP scenarios (ssp119, ssp245, ssp585) released by IPCC. Each scenario contains three GCMS (ec-earth3, gfdl-esm4, mri-esm2-0) climate data. The geospatial range contained in the dataset is China's main land, excluding islands and reefs in the South China Sea. The unit is 0.1 ℃. The file name is GCM_ SSP_ Tmp-30s-serial number NC, 30s, i.e. 0.0083333 °, serial number from 1-40, serial number 1 represents 2021.1-2022.12, and represents the year in turn; Based on ec-earth3_ ssp119_ tmp-30s-1. NC file, for example, represents the monthly average temperature data of ec-earth3 climate model with 1km resolution from 2021.1 to 2022.12 under ssp119 scenario, including 24 layers. For a deeper understanding of the data, please refer to the data cited in the literature and the published papers of the authors.
PENG Shouzhang
This dataset consists of four files including (1) Lake ice thickness of 16 large lakes measured by satellite altimeters for 1992-2019 (Altimetric LIT for 16 large lakes.xlsx); (2) Daily lake ice thickness and lake surface snow depth of 1,313 lakes with an area > 50 km2 in the Northern Hemisphere modeled by a one-dimensional remote sensing lake ice model for 2003-2018 (in NetCDF format); (3) Future lake ice thickness and surface snow depth for 2071-2099 modeled by the lake ice model with a modified ice growth module (table S1.xlsx); (4) A lookup table containing lake IDs, names, locations, and areas. This daily lake ice and snow thickness dataset could provide a benchmark for the estimation of global lake ice and snow mass, thereby improving our understanding of the ecological and economical significance of freshwater ice as well as its response to climate change.
LI Xingdong, LONG Di, HUANG Qi, ZHAO Fanyu
Precipitation over the Tibetan Plateau (TP) known as Asia's water tower plays a critical role in regional water and energy cycles, largely affecting water availability for downstream countries. Rain gauges are indispensable in precipitation measurement, but are quite limited in the TP that features complex terrain and the harsh environment. Satellite and reanalysis precipitation products can provide complementary information for ground-based measurements, particularly over large poorly gauged areas. Here we optimally merged gauge, satellite, and reanalysis data by determining weights of various data sources using artificial neural networks (ANNs) and environmental variables including elevation, surface pressure, and wind speed. A Multi-Source Precipitation (MSP) data set was generated at a daily timescale and a spatial resolution of 0.1° across the TP for the 1998‒2017 period. The correlation coefficient (CC) of daily precipitation between the MSP and gauge observations was highest (0.74) and the root mean squared error was the second lowest compared with four other satellite products, indicating the quality of the MSP and the effectiveness of the data merging approach. We further evaluated the hydrological utility of different precipitation products using a distributed hydrological model for the poorly gauged headwaters of the Yangtze and Yellow rivers in the TP. The MSP achieved the best Nash-Sutcliffe efficiency coefficient (over 0.8) and CC (over 0.9) for daily streamflow simulations during 2004‒2014. In addition, the MSP performed best over the ungauged western TP based on multiple collocation evaluation. The merging method could be applicable to other data-scarce regions globally to provide high quality precipitation data for hydrological research. The latitude and longitude of the left bottom corner across the TP, the number of rows and columns, and grid cells information are all included in each ASCII file.
HONG Zhongkun , LONG Di
The water resource supply resilience of countries along the “Belt and Road” reflects the level of water supply resilience of countries along the route. The higher the data value, the stronger the resilience of water supply in countries along the route. Preparation of data products for water supply resilience of countries along the “Belt and Road”, using the annual precipitation, surface runoff and underground net data produced by FLDAS (Famine Early Warning System Network Land Data Assimilation System) based on the Noah land surface model from 2000 to 2019 The flow simulation data set, on the basis of considering the year-to-year changes, based on sensitivity and adaptability analysis, and through comprehensive diagnosis, prepared and generated water resource supply resilience products. The data set of water supply resilience of countries along the “Belt and Road” has important reference significance for analyzing and comparing the current status of water resources supply resilience in various countries.
XU Xinliang
The CO2 emission reduction resilience of the countries along the "Belt and Road" reflects the level of CO2 emission reduction resilience of the countries along the Belt and Road, and the higher the value of the data, the stronger the CO2 emission reduction resilience of the countries along the Belt and Road. The Emissions Database for Global Atmospheric Research (EDGAR) was used to prepare data on the total CO2 emissions of the countries along the "Belt and Road" from 2000 to 2020, taking into account the year-on-year changes. Based on the sensitivity and adaptation analysis, a comprehensive diagnosis was made based on the annual data of the total CO2 emissions of the countries along the "Belt and Road" from 2000 to 2020, and a resilience product for CO2 emission reduction was prepared. "The data set of CO2 emission reduction resilience of countries along the Belt and Road is an important reference for the analysis and comparison of the current CO2 emission reduction resilience of countries.
XU Xinliang
The resilience of health care development in countries along the Belt and Road reflects the level of resilience of health care development in the countries along the Belt and Road, and the higher the value of the data, the stronger the resilience of health care development in the countries along the Belt and Road. The World Bank statistical database was used for the preparation of the health resilience data. Based on the year-on-year data of these four indicators, and taking into account the year-on-year changes of each indicator, the product of resilience in the development of healthcare conditions was prepared through comprehensive diagnosis based on sensitivity and adaptability analysis. "The Resilience in Health Care Development dataset for countries along the Belt and Road is an important reference for analysing and comparing the current resilience in health care development in each country.
XU Xinliang
The development resilience of social employment in the countries along the Belt and Road reflects the level of resilience of social employment in the countries along the Belt and Road, and the higher the value of the data, the stronger the development resilience of social employment in the countries along the Belt and Road. The data product of social employment development resilience is prepared by referring to the World Bank statistical database, using the year-by-year data of the ratio of total unemployment to total labour force in the countries along the Belt and Road from 2000 to 2019, and based on sensitivity and adaptability analysis by considering the year-by-year changes of each indicator. A comprehensive diagnostic was carried out to generate a resilience product for the development of social employment. "The data set on the resilience of social employment development in the countries along the Belt and Road is an important reference for analysing and comparing the resilience of the current population growth in each country.
XU Xinliang
The resilience of population growth in countries along the Belt and Road reflects the level of resilience of population growth in the countries along the Belt and Road, and the higher the value of the data, the stronger the resilience of population growth in the countries along the Belt and Road. The World Bank's statistical database was used to prepare the Resilience to Population Growth data product, which uses year-on-year data on the population of countries along the Belt and Road from 2000 to 2019. The Resilience to Population Growth product is based on sensitivity and adaptation analysis. Please refer to the documentation for the methodology of preparing the dataset. "The resilience dataset is an important reference for analysing and comparing the current resilience of population growth in countries along the Belt and Road.
XU Xinliang
The resilience of the population age structure of countries along the Belt and Road reflects the level of resilience of the population age structure of the countries along the Belt and Road, and the higher the value of the data, the stronger the resilience of the population age structure of the countries along the Belt and Road. The World Bank's statistical database was used to prepare the data on the resilience of population age structure, and the data on the proportion of children, the proportion of working-age population and the proportion of elderly population in the countries along the Belt and Road from 2000 to 2019 were used year by year. Based on the sensitivity and adaptability analysis, a comprehensive diagnosis was carried out to produce a resilience product for the age structure of the population. Please refer to the documentation for the methodology of preparing the data set. "The data set is an important reference for analysing and comparing the resilience of population age structures in countries along the Belt and Road.
XU Xinliang
The resilience of population urbanisation development in countries along the Belt and Road reflects the level of resilience of population urbanisation development in the countries along the Belt and Road, with higher values indicating stronger resilience of population urbanisation development in the countries along the Belt and Road. The data on the resilience of population urbanisation development are prepared with reference to the World Bank's statistical database, using year-on-year data on two indicators, namely the number of urban population and the number of population in urban agglomerations with a population of over one million, from 2000 to 2019, and based on sensitivity and adaptability analysis, taking into account the year-on-year changes of each indicator. Based on the sensitivity and adaptability analysis, the product of the resilience of population urbanisation development was prepared through comprehensive diagnosis. "The data set on the resilience of population urbanisation development in the countries along the Belt and Road is an important reference for analysing and comparing the resilience of population urbanisation development in various countries.
XU Xinliang
The resilience of education in Belt and Road countries reflects the level of resilience of education in the countries along the Belt and Road, and the higher the value, the stronger the resilience of education in the countries along the Belt and Road. The data on the resilience of educational conditions are prepared by referring to the World Bank's statistical database, using year-on-year data on four indicators - literacy rate, education expenditure, secondary school enrolment rate and tertiary enrolment rate - for countries along the Belt and Road from 2000 to 2019, and taking into account the year-on-year changes in each indicator. Based on the sensitivity and adaptability analysis, a comprehensive diagnosis was carried out to generate a resilience product for the development of education conditions. "The data set on the resilience of educational conditions in countries along the Belt and Road is an important reference for analysing and comparing the current resilience of educational conditions in each country.
XU Xinliang
The resilience of road traffic development in countries along the Belt and Road reflects the level of resilience of road traffic development in the countries along the Belt and Road, and the higher the value of the data, the stronger the resilience of road traffic development in the countries along the Belt and Road. The road traffic development resilience data product is prepared by referring to the World Bank statistical database, using the year-by-year data of four indicators, namely road mileage, railway mileage, air traffic and container terminal throughput of the countries along the "Belt and Road" from 2000 to 2019, and based on the year-by-year changes of each indicator, based on sensitivity Based on the sensitivity and adaptability analysis, the road traffic development resilience product is prepared through comprehensive diagnosis. The data set of road traffic development resilience of countries along the "Belt and Road" is an important reference for analysing and comparing the current road traffic development resilience of countries.
XU Xinliang
The Human Development Index (HDI) was developed by the United Nations Development Programme (UNDP) in the Human Development Report 1990 to measure the level of economic and social development of the United Nations member countries. The HDI is a composite indicator based on three basic variables: life expectancy, educational attainment and quality of life, and is calculated according to a certain methodology. "The One Belt One Road (OBOR) human development resilience dataset is a comprehensive indicator of human development resilience in each country. "The human development resilience dataset for countries along the Belt and Road is a comprehensive diagnosis based on sensitivity and adaptability analysis using year-by-year data of the Human Development Index for countries along the Belt and Road from 2000 to 2020. The Human Development Resilience Indicator (HDRI) data was prepared based on sensitivity and adaptation analysis. Please refer to the documentation for the methodology of preparing the dataset. "The Human Development Resilience Dataset for countries along the Belt and Road is an important reference for analysing and comparing the current state of human development resilience in each country.
XU Xinliang
The GDP per capita growth resilience dataset for countries along the Belt and Road is a comprehensive reflection of the level of GDP per capita growth resilience of each country. The GDP per capita growth resilience dataset was prepared with reference to the World Bank's statistical database, using year-on-year data on GDP per capita (constant 2010 US dollars) for countries along the Belt and Road from 2000 to 2019, and based on sensitivity and adaptability analysis, taking into account the year-on-year changes of each indicator. Through a comprehensive diagnostic, a product on GDP per capita growth resilience was prepared. "The GDP per capita growth resilience dataset for countries along the Belt and Road is an important reference for analysing and comparing the current GDP per capita growth resilience of each country.
XU Xinliang
Macroeconomics refers to the entire national economy or the national economy as a whole, as well as its economic activities and operational status. "The data set of macroeconomic development resilience of countries along the Belt and Road reflects the level of macroeconomic development resilience of the countries along the Belt and Road, and the higher the data value, the stronger the macroeconomic development resilience of the countries along the Belt and Road. The macroeconomic development resilience dataset is prepared with reference to the World Bank's statistical database, using year-on-year changes in four indicators: GDP per capita, gross fixed capital formation as a percentage of GDP, inflation as measured by the GDP deflator, and total savings as a percentage of GDP for countries along the "Belt and Road" from 2000 to 2019. The macroeconomic development resilience product was prepared through a comprehensive diagnosis based on sensitivity and adaptability analysis, taking into account the year-on-year changes of each indicator. "The resilience dataset of macroeconomic development of countries along the Belt and Road is an important reference for analysing and comparing the resilience of macroeconomic development of various countries.
XU Xinliang
"The resilience of the domestic economic systems of the countries along the Belt and Road reflects the level of resilience of the domestic economic systems of each country, and the higher the value of the data, the stronger the resilience of the domestic economic systems of the countries along the Belt and Road. The resilience of domestic economic systems includes macroeconomic development resilience, industrial and service sector development resilience, and the data products are prepared with reference to the World Bank statistical database, using GDP per capita, gross fixed capital formation as a percentage of GDP, inflation as measured by GDP deflator, and gross savings as measured by GDP deflator for countries along the Belt and Road from 2000 to 2019. The resilience products of the domestic economic system are prepared through a comprehensive diagnosis based on sensitivity and adaptability analysis, taking into account the year-on-year changes of each indicator, using year-on-year data of six indicators: GDP per capita, gross fixed capital formation as a percentage of GDP, gross savings as a percentage of GDP, industrial value added as a percentage of GDP, and service value added as a percentage of GDP. "The resilience dataset of the domestic economic systems of the countries along the Belt and Road is an important reference for analysing and comparing the resilience of the domestic economic systems of various countries.
XU Xinliang
"The resilience dataset reflects the level of resilience of industrial and service development in the countries along the Belt and Road, and the higher the value, the stronger the resilience of industrial and service development in the countries along the Belt and Road. The resilience of industrial and service sector development data products are prepared with reference to the World Bank's statistical database, using the year-on-year changes of two indicators, namely the value added of industry as a percentage of GDP and the value added of service sector as a percentage of GDP, for countries along the Belt and Road from 2000 to 2019, and on the basis of considering the year-on-year changes of each indicator. Based on the sensitivity and adaptability analysis, a comprehensive diagnostic was prepared to generate products on the resilience of industrial and service sector development. "The resilience dataset of industrial and service sector development in countries along the Belt and Road is an important reference for analysing and comparing the current resilience of industrial and service sector development in each country.
XU Xinliang
"The Belt and Road countries' external trade system resilience dataset comprehensively reflects the level of resilience of each country's external trade system, and the higher the value of the data, the stronger the resilience of the external trade system of the countries along the Belt and Road. The World Bank's statistical database was used for the preparation of the external trade system resilience data, and the annual data of three indicators, namely the ratio of trade volume to gross national product (GDP), the annual growth rate of exports of goods and services, and the annual growth rate of imports of goods and services of countries along the Belt and Road, were used from 2000 to 2019. On the basis of the year-on-year changes in each indicator, a comprehensive diagnosis based on sensitivity and adaptability analysis was carried out to generate a resilience product for the foreign trade system. Please refer to the documentation for the methodology of preparing the data set. "The resilience dataset of the foreign trade system of countries along the Belt and Road is an important reference for analysing and comparing the current resilience of the foreign trade system of each country.
XU Xinliang
Ta (Near-surface air temperature) is an important physical parameter that reflects climate change. In order to obtain daily Ta data (Tmax, Tmin, and Tavg) with high spatial and temporal resolution in China, we fully analyzed the advantages and disadvantages of various existing data (reanalysis, remote sensing, and in situ data) ，Different Ta reconstruction models are constructed for different weather conditions, and we further improve data accuracy through building correction equations for different regions. Finally, a dataset of daily temperature (Tmax, Tmin, and Tavg) in China from 1979 to 2018 was obtained with a spatial resolution of 0.1° For Tmax, validation using in situ data shows that the root mean square error (RMSE) ranges from 0.86 °C to 1.78 °C, the mean absolute error (MAE) varies from 0.63 °C to 1.40 °C, and the Pearson coefficient (R2) ranges from 0.96 to 0.99. For Tmin, RMSE ranges from 0.78 °C to 2.09 °C, the MAE varies from 0.58 °C to 1.61 °C, and the R2 ranges from 0.95 to 0.99. For Tavg, RMSE ranges from 0.35 °C to 1.00 °C, the MAE varies from 0.27 °C to 0.68 °C, and the R2 ranges from 0.99 to 1.00. Furthermore, a variety of evaluation indicators were used to analyze the temporal and spatial variation trends of Ta, and the Tavg increase was more than 0.0 °C/a, which is consistent with the general global warming trend. In conclusion, this dataset had a high spatial resolution and reliable accuracy, which makes up for the previous missing temperature value (Tmax, Tmin, and Tavg) at high spatial resolution. This dataset also provides key parameters for the study of climate change, especially high-temperature drought and low-temperature chilling damage。
FANG Shu, MAO Kebiao
Freezing (thawing) index refers to the sum of all temperatures less than (greater than) 0 ℃ in a year. Surface freezing (thawing) index is an important parameter to measure the time and capacity of surface freezing (thawing), which can reflect the characteristics of regional freezing and thawing environment. Based on the modis-lst data product, which comes from the national Qinghai Tibet Plateau science data center, the data in the Sanjiang River Basin are read by MATLAB language, and combined with the calculation of freezing (thawing index) formula, the spatial distribution data set of surface freezing and thawing index of dynamic environmental factors outside the Sanjiang River basin (average from 2003 to 2015) is obtained. This data set can better reflect the ability of surface freezing and thawing in the Sanjiang River Basin, so as to reflect the characteristics of regional freezing and thawing environment, It provides important external dynamic environmental factors for the development of freeze-thaw landslide.
LIU Minghao
Aiming at the 179000 km2 area of the pan three rivers parallel flow area of the Qinghai Tibet Plateau, InSAR deformation observation is carried out through three kinds of SAR data: sentinel-1 lifting orbit and palsar-1 lifting orbit. According to the obtained InSAR deformation image, it is comprehensively interpreted in combination with geomorphic and optical image features. A total of 949 active landslides below 4000m above sea level were identified. It should be noted that due to the difference of observation angle, sensitivity and observation phase of different SAR data, there are some differences in the interpretation of the same landslide with different data. The scope and boundary of the landslide need to be corrected with the help of ground and optical images. The concept of landslide InSAR recognition scale is different from the traditional spatial resolution and mainly depends on the deformation intensity. Therefore, some landslides with small scale but prominent deformation characteristics and strong integrity compared with the background can also be interpreted (with SAR intensity map, topographic shadow map and optical remote sensing image as ground object reference). The minimum interpretation area can reach several pixels. For example, a highway slope landslide with only 4 pixels is interpreted with reference to the highway along the Nujiang River.
YAO Xin
This data is a high-resolution soil freeze/thaw (F/T) dataset in the Qinghai Tibet Engineering Corridor (QTEC) produced by fusing sentinel-1 SAR data, AMSR-2 microwave radiometer data, and MODIS LST products. Based on the newly proposed algorithm, this product provides the detection results of soil F/T state with a spatial resolution of 100 m on a monthly scale. Both meteorological stations and soil temperature stations were used for results evaluation. Based on the ground surface temperature data of four meteorological stations provided by the national meteorological network, the overall accuracy of soil F/T detection products achieved 84.63% and 77.09% for ascending and descending orbits, respectively. Based on the in-situ measured 5 cm soil temperature data near Naqu, the average overall accuracy of ascending and descending orbits are 78.58% and 76.66%. This high spatial resolution F/T product makes up traditional coarse resolution soil F/T products and provides the possibility of high-resolution soil F/T monitoring in the QTEC.
ZHOU Xin , LIU Xiuguo , ZHOU Junxiong , ZHANG Zhengjia , CHEN Qihao , XIE Qinghua
Soil moisture is an important boundary condition of earth-atmosphere exchanges, and it has been defined as an essential climate variable by GCOS. Vegetation optical depth is a physical variable to measure the attenuation of vegetation in microwave radiative transfer model, and it has been proved to be a good indicator of vegetation water content and biomass. This dataset uses the multi-channel collaborative algorithm (MCCA) to retrieve both soil moisture and polarized vegetation optical depth with SMAP brightness temperature. The algorithm uses a self-constraint relationship between land parameters and an analytical relationship between brightness temperature at different channels to perform the retrieval process. The MCCA does not depend on other auxiliary data on vegetation properties and can be applied to a variety of satellites. The soil moisture product from this dataset includes the soil moisture content in the unfrozen period and the liquid water content in the frozen period. Both horizontal- and vertical-polarization vegetation optical depth are retrieved. So far as we know, it is the first polarization-dependent vegetation optical depth product at L-band. This dataset was validated by 19 dense soil moisture observation networks (9 core validation sites used by SMAP team and 13 sites not used by them), and the widely used soil climate analysis network (SCAN). It was found that ubRMSE (unbiased root mean square error) of MCCA retrieved soil moisture is generally smaller than that of other SMAP products.
ZHAO Tianjie, PENG Zhiqing , YAO Panpan, SHI Jiancheng
This data uses a landslide hazard risk assessment model consisting of four modules: landslide hazard causative factors, landslide susceptibility model, exposed population and population casualty rate. The module of hazard-causing factors includes DEM, slope, rainfall, temperature, snow cover, GDP, and vegetation cover factors. The landslide hazard susceptibility model is a statistical analysis using a logistic regression model to obtain landslide susceptibility probability values. The population exposure module uses the landslide susceptibility values overlaid with population data. The population casualty rate module is based on the ratio of historical landslide casualties to the population exposed to landslides during the same period. Finally, by substituting the 2020 population data, the exposed population under different levels of landslide hazard susceptibility is calculated and multiplied with the historical period landslide hazard population casualty rate to assessIntegrated multi-hazard population risk in the peri-Himalayan and Asian water tower regions
WANG Ying
Based on long-term series Moderate Resolution Imaging Spectroradiometer (MODIS) snow cover products, daily snow cover products without data gaps at 500 m spatial resolution over the Tibetan Plateau from 2002 to 2021 were generated by employing a Hidden Markov Random Field (HMRF) modeling technique. This HMRF framework optimally integrates spectral, spatiotemporal, and environmental information together, which not only fills data gaps caused by frequent clouds, but also improves the accuracy of the original MODIS snow cover products. In particular, this technology incorporates solar radiation as an environmental contextual information to improve the accuracy of snow identification in mountainous areas. Validation with in situ observations and snow cover derived from Landsat-8 OLI images revealed that these new snow cover products achieved an accuracy of 98.31% and 92.44%, respectively. Specifically, the accuracy of the new snow products is higher during the snow transition period and in complex terrains with higher elevations as well as sunny slopes. These gap-free snow cover products effectively improve the spatiotemporal continuity and the low accuracy in complex terrains of the original MODIS snow products, and is thus the basis for the study of climate change and hydrological cycling in the TP.
HUANG Yan , XU Jianghui
The dataset includes lake ice phenology information of 132 lakes across the Tibetan Plateau (with area larger than 40 km2) from 1978 to 2016 (freeze-up start date, freeze-up end date, break-up start date, break-up end, completely ice-duration and ice duration). The data set uses the combination of model and remote sensing to obtain the phenological information. Firstly, Using the average lake surface temperature extracted by MOD11A2 as calibration data, daily scale long-time series lake surface temperature series was simulated based on an improved lake semi-physical model (air2water). Then the temperature threshold of lake ice phenology was determined by the mod10a1 snow cover product. Compared with the existing research results and data sets, the correlation (R-square) is higher than 0.75. Combined with the advantages of remote sensing and numerical model, this dataset provides support for the analysis of water-air interface exchange, water or heat balance, biochemical processes and their response to climate change of lakes on a large spatio-temporal scale across the Tibetan Plateau.
GUO Linan , WU Yanhong, ZHENG Hongxing, ZHANG Bing , CHI Haojing , FAN Lanxin
This database includes slope, aspect and digital elevation model (DEM) data of Qinghai Tibet Plateau. The data comes from the 30m * 30m resolution numerical elevation model data downloaded from the geospatial data cloud website. Using the surface analysis function of ArcGIS software, the slope and aspect information of the Qinghai Tibet Plateau are extracted. The data has been rechecked and reviewed by many people, and its data integrity, position accuracy and attribute accuracy meet the standards, with excellent and reliable quality. As one of the engineering geological conditions, this data is the basic data for the research on the development law of major engineering disturbance disasters and major natural disasters in the Qinghai Tibet Plateau and the analysis of susceptibility, risk and risk.
QI Shengwen
The fluctuation of a single lake level is a comprehensive reflection of water balance within the basin, while the regional consistent fluctuations of lake level can indicate the change of regional effective moisture. Previous researches were mainly focused on reconstructing effective moisture by multiproxy analyses of lake sediments, but lacked the quantitative studies on regional effective moisture variation. This dataset exhibits the Holocene effective moisture change in typical lake regions of the Tibetan Plateau and East and Central Asia, including Qinghai Lake, Chen Co, Bangong Co, etc., by constructing a virtual lake system, based on a lake energy balance model, a lake water balance model and a transient climate evolution model. The simulation results provide a new perspective for exploring the evolution of lakes on the millennial scale.
LI Yu
The data is the phytoplankton data of 70 points in 26 lakes in Tibet in 2020. The sampling time is from August to September. The sampling method is the conventional phytoplankton sampling method. 1.5 liters of samples are collected, fixed by Lugo's solution, siphoned and concentrated after static precipitation, and the results are examined by inverted microscope. The data includes the density data of different phytoplankton of 77 species / genus in 10 categories, including diatom, green algae, cyanobacteria, dinoflagellate, naked algae, cryptoalgae, brown algae, brown algae and CHAROPHYTA. This data is original and unprocessed. The unit is piece / L. The data can be used to characterize the composition and abundance of phytoplankton in the open water areas of these lakes, and can also be used to calculate the diversity of phytoplankton communities in these lakes.
ZHANG Min
Glacial mass balance is one of the most important glaciological parameters to characterize the accumulation and ablation of glaciers. Glacier mass balance is the link between climate and glacier change, and it is the direct reflection of glacier to the regional climate. Climate change leads to the corresponding changes in the material budget of glaciers, which in turn can lead to changes in the movement characteristics and thermal conditions of glaciers, and then lead to changes in the location, area and ice storage of glaciers. The monitoring method is to set a fixed mark flower pole on the glacier surface and regularly monitor the distance between the glacier surface and the top of the flower pole to calculate the amount of ice and snow melting; In the accumulation area, the snow pits or boreholes are excavated regularly to measure the snow density, analyze the characteristics of snow granular snow additional ice layer, and calculate the snow accumulation; Then, the single point monitoring results are drawn on the large-scale glacier topographic map, and the instantaneous, seasonal (such as winter and summer) and annual mass balance components of the whole glacier are calculated according to the net equilibrium contour method or contour zoning method. The data set is the annual mass balance data of different representative glaciers in the Qinghai Tibet Plateau and Tianshan Mountains, in millimeter water equivalent.
WU Guangjian
Glacier is the supply water source of rivers in the western mountainous area, and it is one of the most basic elements for people to survive and develop industry, agriculture and animal husbandry in the western region. Glaciers are not only valuable fresh water resources, but also the source of serious natural disasters in mountainous areas, such as sudden ice lake outburst flood, glacier debris flow and ice avalanche. Glacier hydrological monitoring is the basis for studying the characteristics of glacier melt water, the replenishment of glacier melt water to rivers, the relationship between glacier surface ablation and runoff, the process of ice runoff and confluence, and the calculation and prediction of floods and debris flows induced by glacier and seasonal snow melt water. Glacial hydrology refers to the water and heat conditions of glacial covered basins (i.e. glacial action areas), that is, the water and heat exchange between glaciers and their surrounding environment, the physical process of water accumulation and flow on the surface, inside and bottom of glaciers, the water balance of glaciers, the replenishment of glacial melt water to rivers, and the impact of water bodies in cold regions on climate change. At present, hydrological monitoring stations are mainly established at the outlet of the river basin to carry out field monitoring《 Glacial water resources of China (1991), hydrology of cold regions of China (2000) and glacial Hydrology (2001) summarize the early studies on glacial hydrology. China has carried out glacier hydrological monitoring on more than 20 glaciers in Tianshan, Karakorum, West Kunlun, Qilian, Tanggula, Nianqing Tanggula, gangrigab, Hengduan and Himalayas. This data set is the monthly runoff data of representative glaciers.
YANG Wei, LI Zhongqin, WANG Ninglian, QIN Xiang
Lakes collect runoff, sediment and nutrients from upstream watersheds and are an important "destination" of material migration at the watershed scale. Therefore, the attributes of lake water and sediment are affected by catchment attributes (e.g. climate, terrain and vegetation conditions) to a large degree. This dataset delineates the watershed boundaries of 1525 Lakes (with an area from 0.2 to 4503 square kilometers) on the Tibetan Plateau, and calculates 721 catchment-scale attributes on the aspects of lake body, terrain, climate, vegetation, soil/geology and anthropogenic activities. This is the first dataset of lake-catchment characteristics on the Tibetan Plateau, which can provide foundamental data for the study of lakes in the Tibetan Plateau.
LIU Junzhi
This data set takes the freezing index calculated by the long-time scale (1901-2016) temperature provided by UEA-CRU and UDEL as the input data, calculates the soil freezing depth of Yarlung Zangbo River Basin through Stefan empirical formula, and interpolates the 30-year scale average soil freezing depth data set output by simulation. This data set takes the freezing index calculated by the long-time scale (1901-2016) temperature provided by UEA-CRU and UDEL as the input data, calculates the soil freezing depth of Yarlung Zangbo River Basin through Stefan empirical formula, and interpolates the 30-year scale average soil freezing depth data set output by simulation.
LIU Lei , LUO Dongliang , WANG Lei
This data set is a code file set of TCA (triple collision analysis) algorithm, which is used to generate the global daily-scale soil moisture fusion dataset from 2011 to 2018.
XIE Qiuxia, XIE Qiuxia, XIE Qiuxia, XIE Qiuxia, XIE Qiuxia, XIE Qiuxia, XIE Qiuxia, XIE Qiuxia, XIE Qiuxia, JIA Li , HU Guangcheng
This data is the disturbance disaster data of 1:250000 major projects in the Qinghai Tibet Plateau. For the scope of disaster interpretation, line engineering (national highway, high-speed, railway and Power Grid Engineering) and hydropower engineering are bounded by the first watershed on both sides of the project; Mine, oilfield and port projects are bounded by 1km away from the project. Engineering disturbance disasters can be divided into two categories: ① landslide, collapse and debris flow disasters induced by engineering construction; ② For natural disasters that may affect the project, it is stipulated that all natural disasters within the above interpretation scope belong to category ② engineering disturbance disasters. The data includes the location, length, width, height difference, distribution elevation, genetic type, inducing factors, occurrence time, lithology and other elements of landslide, disaster related projects and project construction years. Based on Google Earth image and 1:500000 geological diagram, 6176 disaster points were interpreted; Google Earth is mainly used for disturbance disaster interpretation, and combined with field investigation to verify the interpretation results, ArcGIS is used to generate disaster distribution map; The data comes from Google Earth high-resolution images, with high accuracy of original data. In the process of generating disaster files, the interpretation specifications are strictly followed, and special personnel are assigned to review, so the data quality is reliable; Based on the collected data, the disaster risk analysis of the study area can be carried out to provide theoretical guidance for the smooth operation of the built projects and the construction of the line projects not built / under construction.
QI Shengwen
This data set is daily surface albedo product over Tibet plateau region from 2002 to 2020 with a spatial resolution of 0.00425°. The MODIS reflectance data product was used to retrieve the Extended Multi-Sensor Combined BRDF Inversion (EMCBI) Model which has coupled with topographic effects with assistance of a BRDF priori-knowledge. The daily BRDF was retrieved in a 5-day period to collect multi-angular information from MODIS observations. And then the daily albedo is estimated, where the black sky albedo was calculated at local noon. MODIS surface reflectance data (MOD09GA and MYD09GA) are downloaded from the official website. The albedo product is quality-controlled with better temporal and spatial continuity in Tibet plateau area. The validation results show that it meets the accuracy requirements of albedo application with higher precisions comparing to the other similar products. And thus, this product is useful for the long-term environmental monitoring and radiation energy budget research study.
YOU Dongqin, YOU Dongqin, TANG Yong, TANG Yong, TANG Yong, HAN Yuan HAN Yuan
This data includes 1:4 million precision fault data within the scope of Qinghai Tibet Plateau in China. The attribute table fields include fault name, fault length, strike, dip, fault property, paleoearthquake, etc. The data comes from the Seismological Bureau. Later, by consulting a large number of fault related literature, the attribute of fault activity age is added on the basis of the original data. The accuracy of original data is reliable, and a special person is responsible for quality review; After review by many people, the data integrity, position accuracy and attribute accuracy meet the requirements of relevant technical regulations and standards, and the quality is excellent and reliable. The fault data can provide basic data support for some fault related research work in the Qinghai Tibet Plateau.
QI Shengwen
To understand the potential impact of projected climate changes on the vulnerable agriculture in Central Asia (CA) in the future, six agroclimatic indicators are calculated based on the 9km-resolution dynamical downscaled results of three different global climate models and a high-resolution projection dataset of agroclimatic indicators over CA is produced. These indicators are growing season length (GSL, days), biologically effective degree days (BEDD, ℃), frost days (FD, days), summer days (SU, days), warm spell duration index (WSDI, days), and tropical nights (TR, days). The periods are 1986-2005 and 2031-2050. The spatial resolution is 0.1°. As all the indicators except WSDI are defined with absolute temperature thresholds and particularly sensitive to the systematics biases in the model data, the quantile mapping (QM) method is applied to correct the simulated temperature. Results show the QM method largely reduces the biases in all the indicators. GSL, SU, WSDI, and TR will significantly increase over CA and FD will decrease. However, changes in BEDD are spatially heterogeneous, with the increases in northern CA and the mountainous areas and decreases in the southern and middle part of the plain areas. This dataset can be applied for assessing the future risks in the local agriculture for climate changes and will be beneficial to adaption and mitigation actions for food security in this region.
QIU Yuan QIU Yuan
The vegetation type map was created by the random forest (RF) classification approach, based on 319 ground-truth samples, combined with a set of input variables derived from the visible, infrared, and thermal Landsat-8 images. According to vegetation characteristics, four types include alpine swamp meadow (ASM), alpine meadow (AM), alpine steppe (AS), and alpine desert (AD) were classified in this map. Based on a spatial resolution of 30 m, the map can provide more detailed vegetation information.
ZHOU Defu, ZOU Defu, ZOU Defu, Zhao Lin, ZHAO Lin, Liu Guangyue, LIU Guangyue, Du Erji, DU Erji, LI Zhibin , LI Zhibin, Wu Tonghua, WU Xiaodong, CHEN Jie CHEN Jie
This data is the land cover data at 30m resolution of Southeast Asia in 2015. The data format of the data is NetCDF, and the variable name is "land cover type". The data was obtained by mosaicing and extracting the From-GLC data. Several land cover types, such as snow and ice that do not exist in Southeast Asia were eliminated.The legend were reintegrated to match the new data. The data provide information of 8 land cover types: cropland, forest, grassland, shrub, wetland, water, city and bare land. The overall accuracy of the data is 71% (Gong et al., 2019). The data can provide the land cover information of Southeast Asia for hydrological models and regional climate models.
LIU Junguo
The energy supply resilience of the countries along the Belt and Road reflects the level of energy supply resilience of the countries along the Belt and Road, and the higher the value of the data, the stronger the energy supply resilience of the countries along the Belt and Road. "The energy supply resilience data for countries along the "Belt and Road" are prepared with reference to the International Energy Agency (IEA) national energy statistics (https://www.iea.org/data-and-statistics), using the 2000-2019 The energy supply resilience product was prepared based on sensitivity and adaptability analysis, using year-by-year data on coal, oil and natural gas supply in countries along the "Belt and Road", and taking into account the year-by-year changes of each energy source.
XU Xinliang
Population age structure resilience reflects the level of population age structure resilience in the countries along the Belt and Road. The World Bank's statistical database was used to prepare the data on the resilience of the population age structure of the countries along the Belt and Road. Based on the sensitivity and adaptability analysis, a comprehensive diagnosis was made based on the year-on-year change of each indicator, and the product on the resilience of population age structure was prepared.
XU Xinliang
Population growth resilience reflects the level of resilience of population growth in the countries along the belt and road, and the higher the value, the stronger the resilience of population growth in the countries along the belt and road. The data on the resilience of population growth is prepared by referring to the World Bank's statistical database, using the year-on-year changes in the population of countries along the Belt and Road from 2000 to 2019, taking into account the year-on-year changes in each indicator, and through comprehensive diagnosis based on sensitivity and adaptability analysis. The resilience of population growth product.
XU Xinliang
Retrogressive thaw slumps (RTSs) are slope failures caused by the thawing of ice-rich permafrost. Once developed, they usually retreat at high speeds (meters to tens of meters) towards the upslope direction, and the mudflow may destroy infrastructure and release carbon stored in frozen ground. RTSs are frequently distributed in permafrost areas and increase dramatically but lack investigation. Qinghai Tibet Engineering Corridor crosses the permafrost, links the inland and the Tibet. However, in this critical area, we lack knowledge of the distribution and impact of RTSs. To compile the first comprehensive inventory of RTSs, this study uses an iterative semi-automatic method based on deep learning and manual inspection to delineate RTSs in 2019 images. The images from PlanetScope CubeSat have a resolution of 3 meters, have four bands, cover a corridor area of approximately 54,000 square kilometers. The method combines the high efficiency and automation of deep learning and the reliability of the manual inspection to map the entire region ninth, which minimize the missings and misidentification. The manual inspection is based on geomorphic features and temporal changes (2016 to 2020) of RTSs. The inventory which includes 875 RTSs with their attributes, including identification, Longitude and Latitude, possibilities and time, provides a benchmark dataset for quantifying permafrost degradation and its impact.
XIA Zhuoxuan, HUANG Lingcao, LIU Lin
A long-term (1980-2017) land evaporation (E) product with a spatial resolution of 0.25 degree. This is a merged product from three model-based E products using the Reliability Ensemble Averaging (REA) method which minimizes errors. These include the fifth-generation ECMWF Re-Analysis (ERA5), the second Modern-Era Retrospective analysis for Research and Applications (MERRA2), and the Global Land Data Assimilation System (GLDAS). To facilitate user-friendly access and download the dataset is stored individually for each year in a separate file. These files contain daily and monthly mean data (e.g., REA_1980_day.nc and REA_1980_mon.nc). The dataset is stored in NetCDF format, containing the variable E, representing land evaporation, produced in millimeters (mm) as a unit. There are three dimensions included in the dataset: longitude, latitude, and time, with the longitude ranging from -179.875E to 179.875E, the latitude from -59.875N to 89.875N. Complete time coverage is from January 1, 1980, to December 31, 2017.
LU Jiao, WANG Guojie, CHEN Tiexi, LI Shijie, HAGAN Daniel, KATTEL Giri, PENG Jian, JIANG Tong, SU Buda
Near-surface air temperature variability and the reliability of temperature extrapolation within glacierized regions are important issues for hydrological and glaciological studies that remain elusive because of the scarcity of high-elevation observations. Based on air temperature data in 2019 collected from 12 automatic weather stations, 43 temperature loggers and 6 national meteorological stations in six different catchments, this study presents air temperature variability in different glacierized/nonglacierized regions and assesses the robustness of different temperature extrapolations to reduce errors in melt estimation. The results show high spatial variability in temperature lapse rates (LRs) in different climatic contexts, with the steepest LRs located on the cold-dry northwestern Tibetan Plateau and the lowest LRs located on the warm-humid monsoonal-influenced southeastern Tibetan Plateau. Near-surface air temperatures in high-elevation glacierized regions of the western and central Tibetan Plateau are less influenced by katabatic winds and thus can be linearly extrapolated from off-glacier records. In contrast, the local katabatic winds prevailing on the temperate glaciers of the southeastern Tibetan Plateau exert pronounced cooling effects on the ambient air temperature, and thus, on-glacier air temperatures are significantly lower than that in elevation-equivalent nonglacierized regions. Consequently, linear temperature extrapolation from low-elevation nonglacierized stations may lead to as much as 40% overestimation of positive degree days, particularly with respect to large glaciers with a long flowline distances and significant cooling effects. These findings provide noteworthy evidence that the different LRs and relevant cooling effects on high-elevation glaciers under distinct climatic regimes should be carefully accounted for when estimating glacier melting on the Tibetan Plateau.
YANG Wei
This data is the simulated data of glacier distribution in the alpine region of Asia since the last glacial maximum, It includes the annual resolution glacier area change sequence of typical regions (High mountain Asia, Tianshan Mountains, Himalayas and Pamir Plateau) and typical periods (LGM (20000 ~ 19000ka), HS1 (17000 ~ 16000ka), BA (~ 14900 ~ 14350ka), yd (12900 ~ 12000ka), eh (9500 ~ 8500ka), MH (6500 ~ 5500ka), LH (3500 ~ 2500ka) and modern (1951 ~ 1990)) 1 km resolution glacier distribution in High Mountain Asia. This data are created by taking the trace full forcing simulation based on ccsm3 climate model as the external forcing field to drive the 1 km resolution PISM ice sheet model. This data can be used to study the changes of glacier distribution in the alpine region of Asia since the last glacial maximum and its impact on environmental and climatic factors such as lake water level, runoff and landform.
YAN Qing
Photosynthetically active radiation (PAR) is fundamental physiological variable driving the process of material and energy exchange, and is indispensable for researches in ecological and agricultural fields. In this study, we produced a 35-year (1984-2018) high-resolution (3 h, 10 km) global grided PAR dataset with an effective physical-based PAR model. The main inputs were cloud optical depth from the latest International Satellite Cloud Climatology Project (ISCCP) H-series cloud products, the routine variables (water vapor, surface pressure and ozone) from the ERA5 reanalysis data, aerosol from the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) products and albedo from Moderate Resolution Imaging Spectroradiometer (MODIS) product after 2000 and CLARRA-2 product before 2000. The grided PAR products were evaluated against surface observations measured at seven experimental stations of the SURFace RADiation budget network (SURFRAD), 42 experimental stations of the National Ecological Observatory Network (NEON), and 38 experimental stations of the Chinese Ecosystem Research Network (CERN). The instantaneous PAR was validated at the SURFRAD and NEON, and the mean bias errors (MBEs) and root mean square errors (RMSEs) are 5.6 W m-2 and 44.3 W m-2, and 5.9 W m-2 and 45.5 W m-2, respectively, and correlation coefficients (R) are both 0.94 at 10 km scale. When averaged to 30 km, the errors were obviously reduced with RMSEs decreasing to 36.3 W m-2 and 36.3 W m-2 and R both increasing to 0.96. The daily PAR was validated at the SURFRAD, NEON and CERN, and the RMSEs were 13.2 W m-2, 13.1 W m-2 and 19.6 W m-2, respectively at 10 km scale. The RMSEs were slightly reduced to 11.2 W m-2, 11.6 W m-2, and 18.6 W m-2 when upscaled to 30 km. Comparison with the other well-known global satellite-based PAR product of the Earth's Radiant Energy System (CERES) reveals that our PAR product was a more accurate dataset with higher resolution than the CRERS. Our grided PAR dataset would contribute to the ecological simulation and food yield assessment in the future.
TANG Wenjun
The Central Asia Reanalysis (CAR) dataset is generated based on the Weather Research and Forecast (WRF) model version 4.1.2 and WRF Data Assimilation (WRFDA) Version 4.1.2. Variables include temperature,, pressure, wind speed, precipitation and radiation. The reanalysis is established through cyclic assimilation, which performs data assimilation every 6 hours by 3DVAR. The assimilated data include conventional atmospheric observation and satellite radiation data. The main source of conventional data is Global Teleconnection System (GTS), including surface station, automatic station, radiosonde and aircraft report, and the observation elements include temperature, air pressure, wind speed and humidity. Satellite observations include retrievals and radiation data, The retrievals are mainly atmospheric motion vectors from polar orbiting meteorological satellites (NOAA-18, NOAA-19, MetOP-A and MetOP-B) and resampled to a horizontal resolution of 54km; the radiation data includes microwave radiation from MSU, AMSU and MHS and HIRS infrared radiation data. The simulation applies nesting with a horizontal resolution of 27km and 9km respectively, a total of 38 layers in the vertical direction and a top of the model layer of 10hPa. The lateral boundary conditions of the model are provided by ERA-Interim every 6 hours. The physical schemes used in the model are Thompson microphysics scheme, CAM radiation scheme, MYJ boundary layer scheme, Grell convection scheme and Noah land surface model. The data covers five countries in Central Asia, including Kazakhstan, Tajikistan, Kyrgyzstan, Turkmenistan and Uzbekistan, as well as lakes in Central Asia, such as Caspian Sea, Aral Sea, Balkash lake and Isaac lake, which can be used for the study of climate, ecology and hydrology in the region. Compared with gauge-based precipitation in Central Asia, the simulation by CAR shows similar performance with MSWEP ( a merged product) and outperforms ERA5 and ERA-Interim.
YAO Yao
Qiangyong glacier: 90.23 °E, 28.88° N, 4898 m asl. The surface is bedrock. The record contains data of absolute pressure and water temperature. Data from the automatic water gauge was collected using USB equipment at 12:00 on June 15, 2021, with a recording interval of one hour, and data was downloaded at 12:00 on Nov. 2, 2021. There is no missing data. Jiagang glacier: 88.69°E, 30.82°N, 5362 m asl. The surface is rubble and weeds. The record contains data of absolute pressure and water temperature. Data from the automatic water gauge was collect
