We propose an algorithm for ice fissure identification and detection using u-net network, which can realize the automatic detection of ice fissures of Typical Glaciers in Greenland ice sheet. Based on the data of sentinel-1 IW from July and August every year, in order to suppress the speckle noise of SAR image, the probabilistic patch based weights (ppb) algorithm is selected for filtering, and then the representative samples are selected and input into the u-net network for model training, and the ice cracks are predicted according to the trained model. Taking two typical glaciers in Greenland (Jakobshavn and Kangerdlussuaq) as examples, the average accuracy of classification results can reach 94.5%, of which the local accuracy of fissure area can reach 78.6%, and the recall rate is 89.4%.
LI Xinwu , LIANG Shuang , YANG Bojin , ZHAO Jingjing
We propose an algorithm for ice crack identification and detection using u-net network, which can realize the automatic detection of Antarctic ice cracks. Based on the data of sentinel-1 EW from January to February every year, in order to suppress the speckle noise of SAR image, the probabilistic patch based weights (ppb) algorithm is selected for filtering, and then representative samples are selected and input into the u-net network for model training, and the ice cracks are predicted according to the trained model. Taking five typical ice shelves（Amery、Fimbul、Nickerson、Shackleton、Thwaiters) in Antarctica as an example, the average accuracy of classification results can reach 94.5%, of which the local accuracy of fissure area can reach 78.6%, and the recall rate is 89.4%.
LI Xinwu , LIANG Shuang , YANG Bojin , ZHAO Jingjing
Fractional Vegetation Cover (FVC) refers to the percentage of the vertical projected area of vegetation to the total area of the study area. It is an important indicator to measure the effectiveness of ecological protection and ecological restoration. It is widely used in the fields of climate, ecology, soil erosion and so on. FVC is not only an ideal parameter to reflect the productivity of vegetation, but also can play a good role in evaluating topographic differences, climate change and regional ecological environment quality. This research work is mainly to post process two sets of glass FVC data, and give a more reliable vegetation coverage of the circumpolar Arctic Circle (north of 66 ° n) and the Qinghai Tibet Plateau (north of 26 ° n to 39.85 °, east longitude 73.45 ° to 104.65 °) in 2013 and 2018 through data fusion, elimination of outliers and clipping.
YE Aizhong
The data of Cenozoic plant macrofossils on the Qinghai Tibet Plateau includes leaves, seeds and fruits. It includes Latin and Chinese names of families, genera and species, times, places of origin, morphological descriptions, discussions, specimens and references. The species names are assigned according to the original literature. For fossil records revised by later research, the revised records were chosen; The age of the origin (fossil site) is assigned according to the latest literature. The terms and description paradigm of leaf shape description are referred to the book "Leaf Structure Manual"; The length, angle, and other measurement data in the description are derived from the original literature. The fossil records of the document are sorted alphabetically by Latin initials of families and genera. The data can provide important clues for studying the coupling relationship between the environmental climate changed and the evolution of vegetation and plant diversity in the Cenozoic Qinghai Tibetan Plateau.
ZHOU Zhekun , LIU Jia , CHEN Linlin , ROBERT Spicer , LI Shufeng , HUANG Jian , ZHANG Shitao , HUANG Yongjiang , JIA Linbo , HU Jinjin , SU Tao
The Qinghai Tibet Plateau is known as the "Asian water tower", and its runoff, as an important and easily accessible water resource, supports the production and life of billions of people around, and supports the diversity of ecosystems. Accurately estimating the runoff of the Qinghai Tibet Plateau and revealing the variation law of runoff are conducive to water resources management and disaster risk avoidance in the plateau and its surrounding areas. The glacier runoff segmentation data set covers the five river source areas of the Qinghai Tibet Plateau from 1971 to 2015, with a time resolution of year by year, covering the five river source areas of the Qinghai Tibet Plateau (the source of the Yellow River, the source of the Yangtze River, the source of the Lancang River, the source of the Nujiang River, and the source of the Yarlung Zangbo River), and the spatial resolution is the watershed. Based on multi-source remote sensing and measured data, it is simulated using the distributed hydrological model vic-cas coupled with the glacier module, The simulation results are verified with the measured data of the station, and all the data are subject to quality control.
WANG Shijin
The dataset of landuse types in Qilian Mountains National Park in 1985 is a vector dataset based on the remote sensing monitoring dataset of the current landuse situation in China by CAS, which is obtained through cropping and splicing operations. The data production production is vector data generated by manual visual interpretation using Landsat TM/ETM remote sensing images as the main data source. 3 datasets for 2000-2020 are raster datasets with 30m resolution based on GlobeLand30 global 30m ground cover data, obtained through mask extraction and other operations. The land use types of all datasets include 10 primary types of cropland, forest, shrubland, grassland, wetland, water, tundra, impervious surface, bareland, glacier, and permanent snow. The data products can detect most of the land cover changes caused by human activities, which is very important in practical applications. This data can be used to analyze the historical land use types in the Qilian Mountains region and to analyze the changes of land use types in the Qilian Mountains region in combination with the current landuse type data.
NIAN Yanyun
1) Data content: CT scan dataset of vegetation-soil-rock three-dimensional spatial structure of typical watersheds in Qilian Mountains, the data includes the volume density of moss layers at different depths, soil macroporosity and soil gravel volume density data in typical watersheds of Qilian Mountains; 2) Data Source and processing method: The moss layer and the undisturbed soil column with a depth of 30 cm under the moss cover were collected in a typical small watershed of the Qilian Mountains, and the moss layer and the undisturbed soil column were scanned with an industrial X-ray three-dimensional microscope; 3) Data quality description: The resolution of moss layer is 40 μm, and the resolution of undisturbed soil column is 68 μm; 4) Data application results and prospects: CT scan data set of vegetation-soil-rock three-dimensional spatial structure of typical small watersheds in Qilian Mountains is suitable for ecological restoration, water resources management and utilization in Qilian Mountains. It is of great significance and can provide basic data and theoretical support for elaborating the water conservation function and mechanism of the Qilian Mountains.
HU Xia
Through the joint inversion of seismic waveforms and InSAR coseismic displacement data, our study revealed the spatiotemporal and spatial source rupture processprocesses of the two strong earthquakes that occurred in struck the eastern Tibetan Plateau atin May 2021. The results show that the Yangbi earthquake, which occurred in along the southeastern margin of the TibetTibetan Plateau, was a Mw6.1 event with characterized by unilateral right-dextral strike-slip rupture and 8s an 8 s duration. The In addition, the Maduo earthquake, which occurred in the interior of the Tibetan Plateau, was a Mw7.5 event with characterized by left-sinistral lateral-strike- slip extendedextending along both sides of the earthquake seismogenic fault and 36sa 36 s duration. The rupture properties of these two strong earthquakes reflect the deformation characteristics of different parts of the eastern Tibetan Plateau,. and also These events also caused the increase of the Coulomb stress of the surrounding active faults to increase, so we should pay attention to the risk potential of future earthquakes should be evaluated.
WANG Weimin
To explore inorganic hydrochemical characteristics of the upper Yarlung Zangbo River, water samples were collected from the main stream and different tributaries in this region in August 2020. The water was collected with 100mL polyethylene (PE) plastic bottle, and the basic physical and chemical parameters such as pH value (±0.2) and dissolved oxygen (±1%) of the sampling site were measured by multi -parameter water quality monitor (YSI-EX02,USA).,and HCO3- concentration was titrated with 0.025mol/L HCl.The concentrations of Na+, K+, Ca2+, Mg2+, SO42-, NO3- and Cl- ions were analyzed and determined by ion chromatograph (Shenhan CIC-D160, China) in the laboratory. Using Gibbs model, correlation analysis and principal component analysis method, analyzed the one main ion concentration changes, chemical composition characteristics, analytical, and the ion source was designed to reveal inorganic water chemical characteristics of The Tibet plateau glacier melt water runoff, and for plateau typical river water and changing trend forecast provides the basis.
NIU Fengxia
The dataset includes three high-resolution DSM data as well as Orthophoto Maps of Kuqionggangri Glacier, which were measured in September 2020, June 2021 and September 2021. The dataset is generated using the image data taken by Dajiang Phantom 4 RTK UAV, and the products are generated through tilt photogrammetry technology. The spatial resolution of the data reaches 0.15 m. This dataset is a supplement to the current low-resolution open-source topographic data, and can reflect the surface morphological changes of Kuoqionggangri Glacier from 2020 to 2021. The dataset helps to accurately study the melting process of Kuoqionggangri Glacier under climate change.
LIU Jintao
1) Soil environmental quality data of typical industrial parks in Huangshui basin of Qinghai Province provide basic support for soil pollution control caused by regional industrial activities; 2) The data source is the soil samples of typical areas in Huangshui River Basin. After collection, the samples are quickly stored in the refrigerator at - 4 ℃ and sent to the laboratory as soon as possible. After pretreatment, the relevant parameters are tested; 3) The process of sample collection and transportation meets the specifications, and the experimental detection process strictly follows the relevant standards. Due to the changes of various factors of soil environment, the results are only aimed at the investigation results; 4) The data can be used to analyze regional soil pollution and heavy metal risk assessment;
WANG Lingqing
This data is the plant diversity and distribution data of chnz016 grid on Qinghai Tibet Plateau, including the Chinese name, Latin name, latitude and longitude, altitude, collection number, number of molecular materials, number of specimens, administrative division, small place, collector, collection time and creator of plants in this grid. The data is obtained from e scientific research website（ http://ekk.kib.ac.cn/web/index/#/ ）And partially complete the identification. This data has covered the list and specific distribution information of all plants in this flora. This data can be used not only to study the floristic nature of this region, but also to explore the horizontal and vertical gradient pattern of plants in this region.
DENG Tao
This data is the plant diversity and distribution data of chnac006 grid on the Qinghai Tibet Plateau, including the Chinese name, Latin name, latitude and longitude, altitude, collection number, number of molecular materials, number of specimens, administrative division, small place, collector, collection time and creator of plants in this grid. The data is obtained from e scientific research website（ http://ekk.kib.ac.cn/web/index/#/ ）And partially complete the identification. This data has covered the list and specific distribution information of more than 600 species of plants in more than 200 genera and 91 families in this flora. This data can be used not only to study the floristic nature of this region, but also to explore the horizontal and vertical gradient pattern of plants in this region.
DENG Tao
The dataset contains microbial amplicon sequencing data from a total of 269 ice samples collected from 15 glaciers on the Tibetan Plateau from November 2016 to August 2020, including 24K Glacier (24K), Dongkemadi Glacier (DKMD), Dunde Glacier (DD), Jiemayangzong Glacier (JMYZ), Kuoqionggangri Glacier (KQGR), Laigu Glacier (LG), Palung 4 Glacier (PL4), Qiangtang 1 Glacier (QT), Qiangyong Glacier (QY), Quma Glacier (QM), Tanggula Glacier (TGL), Xiagangjiang Glacier (XGJ), Yala Glacier (YA), Zepugou Glacier (ZPG), ZhufengDongrongbu Glacier (ZF). The sampling areas ranged in latitude and longitude from 28.020°N to 38.100°N and 86.28°E to 95.651°E. The 16s rRNA gene was amplified by polymerase chain reaction (PCR) using 515F/907R (or 515F/806R) primers and sequenced with the Illumina Hiseq2500 sequencing platform to obtain raw data. The selected primer sequences were "515F_GTGYCAGCMGCCGCGGTAA; 907R_CCGTCAATTCMTTTRAGTTT" "515F_GTGCCAGCMGCCGCGG; 806R_ GGACTACHVGGGTWTCTAAT". The uploaded data include: sample number, sample description, sampling time, latitude and longitude coordinates, sample type, sequencing target, sequencing fragment, sequencing primer, sequencing platform, data format and other basic information. The sequencing data are stored in sequence file data format forward *.1.fq.gz and reverse *.2.fq.gz compressed files.
LIU Yongqin
This data is the plant diversity and distribution data of chnyb013 grid on the Qinghai Tibet Plateau, including the Chinese name, Latin name, latitude and longitude, altitude, collection number, number of molecular materials, number of specimens, administrative division, small place, collector, collection time and creator of plants in this grid. The data is obtained from e scientific research website（ http://ekk.kib.ac.cn/web/index/#/ ）And partially complete the identification. This data has covered a large number of plant catalogues and specific distribution information in this flora. This data can be used not only to study the floristic nature of this region, but also to explore the horizontal and vertical gradient pattern of plants in this region.
DENG Tao
This data is the plant diversity and distribution data of the chnab005 grid on the Qinghai Tibet Plateau, including the Chinese name, Latin name, latitude and longitude, altitude, collection number, number of molecular materials, number of specimens, administrative division, small place, collector, collection time and creator of the plants in this grid. This data is obtained from e-Science website（ http://ekk.kib.ac.cn/web/index/#/ ）And partially complete the identification. This data has covered the list of plants in this flora and the specific distribution information. This data can be used not only to study the floristic nature of this region, but also to explore the horizontal and vertical gradient pattern of plants in this region. What is different from last year is that the grid with the most scientific research data this year has changed, which may be affected by the epidemic or the environment.
DENG Tao
The Cenozoic strata developed within and around the Tibetan Plateau, contain fruitful information on the tectonic evolution, paleoenvironment and paleoclimate changes. It's very significant on revealing the history of the uplift and deformation of the Tibetan Plateau and its relevant effects on the regional and even global environment and climate. This data set contains several well developed sections, which have been identified by the systematic geological survey. Depending on the tools (e.g. GPS, geological compass) in the fieldwork, we have finished the geological measurements and descriptions of these sections as well as the relevant geological maps. It includes a 90-m loess deposit of the Duikang section in the Linxia basin, several fluvial and lacustrine deposits (such as the 1890-m Dayu section in the Lunpola basin, the 300-m Shuanghe section in the Jianchuan basin, the 252-m Caijiachong section in the Qujing basin) and a 932-m saline lacustrine deposit with gypsolyte of the Jiangcheng section in the Simao basin. This data set provides a solid geological foundation for the following researches on stratigraphic chronology, tectonic evolution, paleoenvironment and paleoclimate, and so forth.
FANG Xiaomin , FANG Xiaomin, YAN Maodu, ZHANG Weilin, ZHANG Dawen
The Wuyu Basin is bounded by the Gangdese Mountains to the north and the Yarlung Tsangpo River to the south, and is a representative basin to study the Cenozoic tectonism of the southern Tibet. The sedimentary strata in the Wuyu Basin include the Paleocene-Eocene Linzizong Group volcanics and the Oligocene Rigongla Formation (Fm.) volcanics, the Miocene lacustrine sediments of the Mangxiang Fm. and Laiqing Fm. volcanics, the late Miocene-Pliocene Wuyu Fm., and the Pleistocene Dazi Fm. Five sandstone samples from the Mangxiang Fm., Wuyu Fm. and Dazi Fm. and one modern Wuyu reiver sand sample were collected for detrital zircon U-Pb dating using the LA-ICP-MS method. Detrital zircon U-Pb ages in the Mangxiang Fm. show a large cluster at 45-80 Ma; those in the Wuyu Fm. show a large cluster at 8-15 Ma and a subsidiary cluster at 45-70 Ma; those in the Dazi Fm. show three large clusters at 45-65 Ma, 105-150 Ma and 167-238 Ma; and those in modern Wuyu river show a large cluster at 8-15 Ma and a subsidiary cluster at 45-65 Ma (Figure 1). Late Cretaceous-early Eocene zircons in all samples are consistent with the most prominent stage of magmatism of the Gangdese Mountains; the 8-15 Ma zircons in the Wuyu Fm. and modern Wuyu river are consistent with the magmatism of the Laiqing Fm.; and the Triassic-Jurassic zircons in the Dazi Fm. are consistent with the magmatism of the central Lhasa terrane. The results of detrital zircon U-Pb ages and sedimentary facies analyses in the Wuyu Basin indicate that the southern Tibetan Plateau suffered multi-stage tectonism-magmatism since the India-Asia collision: (1) Paleogene Linzizong Group-Rigongla Fm. volcanics; (2) tectonism-magmatism at ~15 Ma ended the lacustrine sediments of the Mangxiang Fm. and resulted in volcanism of the Laiqing Fm.; (3) tectonism at ~8 Ma resulted in the volcanic rocks of the Laiqing Fm. becoming one of the main provenances for the overlying Wuyu Fm.; (4) the Wuyu Basin formed braided river and received sediments from the central Lhasa terrane to its north at ~2.5 Ma. The geomorphic pattern of the southern Tibet has gradually formed since the Quaternary.
MENG Qingquan MENG Qingquan
To fully implement the measures for the administration of the scientific data for the "government budget funding for formation of the scientific data shall, in accordance with the open as normal, not open for exception principle, by the competent department to organize the formulation of scientific data resources directory, the directory should be timely access to the national data sharing and data exchange platform, open to society and relevant departments to share, In the spirit of unimpeded military-civilian sharing channels for scientific data, and in accordance with the relevant requirements of relevant exchange standards and specifications, this code is now established for the second Comprehensive scientific investigation and research project on the Qinghai-Tibet Plateau. The main drafting unit of this code: Institute of Geographic Sciences and Natural Resources Research, CAS. Main draftsman of this specification: project group 9 of the second Comprehensive Scientific investigation and research Mission of qinghai-Tibet Plateau.
YANG Yaping
Log and image are unique and important primary data of field research, and also an important part of scientific data. In order to further standardize the collection, collation, warehousing and exchange of expedition logs and image data of the second Comprehensive scientific investigation and research project on the Qinghai-Tibet Plateau, and ensure the operability, organization and standardization of the warehousing of expedition logs and image data, this technical specification is formulated. This specification provides procedures and methods for the collection and collation of investigation logs and image data, including work preparation, field investigation, data collation and other requirements, in order to better serve the storage of investigation data. This specification applies to the collation and storage of log and image data of field investigations organized by the second Comprehensive scientific investigation and research project on the Qinghai-Tibet Plateau, and other relevant data formed by field investigations can also be carried out by reference to this technical specification.
YANG Yaping
This dataset includes the maximum normalized vegetation index (NDVI) data from 1982 to 2015, the maximum enhanced vegetation index (EVI) data from 2000 to 2020, and the land cover change (LUCC) data from 2001 to 2019 in the China-Mongolia-Russia Economic Corridor (CMREC). Among these, NDVI data was extracted from GIMMS satellite data with a resolution of 8 km; EVI and LUCC data were extracted from MODIS satellite data (MOD13A3 and MCD12C1) with a resolution of 1 km and 5 km, respectively. The dataset filters the outliers or missing values in the original data, which is of higher quality than the source data. Meanwhile, we adopted the maximum value composite (MVC) method to process NDVI and EVI data to obtain the annual maximum NDVI and EVI, which can better reflect the vegetation distribution and change in CMREC over the past several decades. The spatio-temporal changes of vegetation and land use extracted from satellite remote sensing data will provide scientifical guidance for the risk control and prevention of the ecological environment change in CMREC.
ZHANG Xueqin
In order to integrate the pan third pole domestic chicken data, build the "global domestic chicken genome database (chicken2k)", provide basic data for the international research on the origin, domestication and selection of domestic chickens, and provide scientific guidance for the breeding and improvement of new domestic chicken varieties. In 2022, this sub project cooperated with the Animal Branch of the Germplasm Bank of Wild Species, Chinese Academy of Sciences, to apply for the use of genetic samples of domestic animals in Southeast Asia collected and preserved in recent years, and select representative individuals to carry out genetic diversity assessment. This data set contains 224 blood and tissue samples of domestic chickens and Hongyuan chickens from Southeast Asian countries (Laos, Thailand, Myanmar and Vietnam) collected by the Animal Germplasm Resource Bank. This data set contains basic sample information such as sample species, variety, detailed sampling place, sample type, collection time, collector and storage method, which are stored in Excel form.
PENG Minsheng
In order to describe the distribution pattern of genetic diversity of main domesticated animals in the Qinghai Tibet Plateau and its surrounding areas (Pan third pole area), and clarify its related genetic background. In 2020, we extracted the total DNA from 266 global chicken blood, tissue and other DNA tissue samples, built a database and sequenced the whole genome. At the same time, we downloaded the published chicken genome data, and carried out population analysis of 863 chicken genomes, so as to provide basic data for exploring the historical events of domestication, migration and expansion of domestic chickens in the pan third pole region, and further explore the adaptation mechanism of domesticated animals to harsh environments such as drying. Articles related to this data set have been published. All data in this data set can be downloaded online from fastq, BAM, VCF and SNP files.
PENG Minsheng
This dataset consists of four files including (1) Lake ice thickness of 16 large lakes measured by satellite altimeters for 1992-2019 (Altimetric LIT for 16 large lakes.xlsx); (2) Daily lake ice thickness and lake surface snow depth of 1,313 lakes with an area > 50 km2 in the Northern Hemisphere modeled by a one-dimensional remote sensing lake ice model for 2003-2018 (in NetCDF format); (3) Future lake ice thickness and surface snow depth for 2071-2099 modeled by the lake ice model with a modified ice growth module (table S1.xlsx); (4) A lookup table containing lake IDs, names, locations, and areas. This daily lake ice and snow thickness dataset could provide a benchmark for the estimation of global lake ice and snow mass, thereby improving our understanding of the ecological and economical significance of freshwater ice as well as its response to climate change.
LI Xingdong, LONG Di, HUANG Qi, ZHAO Fanyu
The North China Plain (NCP), with an area of ~140,000 square kilometers, is among the most important agricultural producing bases in China. In addition to canal irrigation with surface water from the Yellow River, the NCP also needs much groundwater for intensive irrigation. Spatiotemporally continuous and daily evapotranspiration (ET) estimates of high spatial resolution could be valuable for improving our understanding of agricultural water consumption across the NCP, and also for improving water use efficiency for better agricultural water resource management practices over similar regions globally. This ET data set at 1 km spatial resolution and daily timescale across the NCP from Jan 2008 to Dec 2019 was generated using two source energy balance model (TSEB) and data fusion. The accuracy is generally comparable and even higher than published results, with our ET data set featuring spatiotemporal continuity and high spatial resolution for a decade. Furthermore, this data set and associated approaches are valuable for performing daily, monthly, seasonal, interannual, and trend analyses of ET in the NCP and similar regions globally.
ZHANG Caijin , LONG Di
Precipitation over the Tibetan Plateau (TP) known as Asia's water tower plays a critical role in regional water and energy cycles, largely affecting water availability for downstream countries. Rain gauges are indispensable in precipitation measurement, but are quite limited in the TP that features complex terrain and the harsh environment. Satellite and reanalysis precipitation products can provide complementary information for ground-based measurements, particularly over large poorly gauged areas. Here we optimally merged gauge, satellite, and reanalysis data by determining weights of various data sources using artificial neural networks (ANNs) and environmental variables including elevation, surface pressure, and wind speed. A Multi-Source Precipitation (MSP) data set was generated at a daily timescale and a spatial resolution of 0.1° across the TP for the 1998‒2017 period. The correlation coefficient (CC) of daily precipitation between the MSP and gauge observations was highest (0.74) and the root mean squared error was the second lowest compared with four other satellite products, indicating the quality of the MSP and the effectiveness of the data merging approach. We further evaluated the hydrological utility of different precipitation products using a distributed hydrological model for the poorly gauged headwaters of the Yangtze and Yellow rivers in the TP. The MSP achieved the best Nash-Sutcliffe efficiency coefficient (over 0.8) and CC (over 0.9) for daily streamflow simulations during 2004‒2014. In addition, the MSP performed best over the ungauged western TP based on multiple collocation evaluation. The merging method could be applicable to other data-scarce regions globally to provide high quality precipitation data for hydrological research. The latitude and longitude of the left bottom corner across the TP, the number of rows and columns, and grid cells information are all included in each ASCII file.
HONG Zhongkun , LONG Di
An embedded cement-based piezoelectric ceramic sensor is studied and designed, which is embedded in the anti slide pile for four point bending test. The feasibility and accuracy of cement-based piezoelectric ceramic sensor are verified by using acoustic emission equipment and comparing with traditional commercial acoustic emission sensors. In this experiment, four piezoelectric ceramic sensors were prepared, and a traditional commercial acoustic emission sensor was arranged near the piezoelectric ceramic sensor. The data collected by the two sensors were compared. There are four groups of data, and each group of data includes the data of a piezoelectric ceramic sensor and a commercial acoustic emission sensor in a similar position. The test shows that the embedded cement-based piezoelectric ceramic sensor has high sensitivity and can work under quasi-static load. It is of great significance for the monitoring of internal fracture of mass concrete structure.
JIANG Qinghui
Velocity is an important parameter to reflect the dynamics of slope. A velocity sensors are arranged on the top of slope of the Xiaguiwa bedding rock model slope. A velocity sensor is arranged on the shaking table to record the real velocity state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the velocity data set of the bedding rock model slope; The peak values of the velocity data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action. The ratio of the peak velocity on the slope to the peak velocity on the table reflects the enhancement level of the velocity response of the slope top under seismic action.
GUO Mingzhu
Displacement is an important parameter to reflect the dynamics of slopes. Six acceleration sensors on the interface of weak and hard lithology and three acceleration sensors on the slope surface of the Xiaguiwa bedding rock model slope were selected as the study samples. The acceleration data of the study samples were processed by filtering, noise reduction and screening, and then quadratic integration and zero line callback were performed to calculate the peak displacement under the amplitude of 0.3g~0.8g Maoxian wave, and the displacement data set of the shaking table model test was obtained for the bedding rock model slope; the two sets of data on the weak and hard lithology interface can reflect the influence of the weak rock layer on the displacement of the bedding rock slope under the seismic action; The two sets of data on the interface of weak and hard lithology can reflect the influence of weak rock layer on the displacement of the bedding rock slope under the seismic effect; The set of data on the slope table can reflect the displacement relationship of various positions on the slope table;
GUO Mingzhu
Four point bending failure tests (bending failure and shear failure of pure reinforced anti slide pile; bending failure and shear failure of prestressed anti slide pile) were carried out on four anti slide piles with different structures, and the whole failure process was monitored by acoustic emission. The monitoring equipment is the German eight channel vallen acoustic emission monitor, and seven sensors are arranged to monitor the damage of piles in the whole area. The collected AE data mainly include amplitude, energy, ring count, frequency and other key AE indicators. By studying the characteristics of acoustic emission signals in the whole process, we can get the acoustic emission characteristics of anti slide piles in different stages and different failure forms, establish the damage model, and provide a feasible scheme for the prediction and early warning of structural failure.
JIANG Qinghui
Displacement is an important parameter reflecting the characteristics of slope dynamics. The displacement data set is obtained by arranging one displacement measurement point at each of the toe, middle, shoulder and top of the counter-bedding model slope, collecting displacement data every one minute, correcting the collected data and deleting the abnormal data at the end of each point, and obtaining the displacement data set of the counter-bending rock slope shaking table model test; The displacement data set of the model slope under the same working condition can reflect the relationship between the displacement of the toe, middle, shoulder and top of the slope under such seismic action, and the displacement data set of the model slope under different working conditions can reflect the damage mechanism of the counter-beddomg rock slope with the accumulation of seismic action.
GUO Mingzhu
Velocity is an important parameter to reflect the dynamics of slope. A velocity sensors are arranged on the top of slope of the Xuelongnang counter-bedding rock model slope. A velocity sensor is arranged on the shaking table to record the real velocity state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the velocity data set of the counter-bedding rock model slope; The peak values of the velocity data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action. The ratio of the peak velocity on the slope to the peak velocity on the table reflects the enhancement level of the velocity response of the slope top under seismic action.
GUO Mingzhu
Acceleration is an important parameter to reflect the dynamics of slope. Fifteen acceleration sensors are arranged on the slope surface, lithological interface and inside the slope of the Xuelongnang counter-bedding rock model slope. An acceleration sensor is arranged on the shaking table to record the real acceleration state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the acceleration data set of the counter-bedding rock model slope; The peak values of the acceleration data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action, and the ratio of the peak acceleration on the slope to the peak acceleration on the table can reflect whether the slope is enhanced or attenuated at each location under the seismic action.
GUO Mingzhu
(1) The data content is the environmental monitoring data of high slope of Zala hydropower station, including the environmental data of automatic monitoring of high slope of Zala hydropower station, which has certain guiding significance for the stability of slope of Zala hydropower station and can provide data support for disaster prevention and reduction of Zala hydropower station; (2) The data comes from the automatic transmission of automatic monitoring equipment, and is automatically interpreted and processed by the software of monitoring and early warning platform to finally generate the data in Excel; (3) The data transmission is stable and the quality is high, which can provide a basis for the slope stability of zhala hydropower station; (4) The data can reflect the environmental changes of the high slope of zhala hydropower station, and has a wide application prospect.
XU Kunzhen
(1) The data content is the deformation monitoring data of high slope of zhala hydropower station, including the deformation data of automatic monitoring of high slope of zhala hydropower station, which has certain guiding significance for the stability of slope of zhala hydropower station and can provide data support for disaster prevention and reduction of zhala hydropower station; (2) The data comes from the automatic transmission of automatic monitoring equipment, and is automatically interpreted and processed by the software of monitoring and early warning platform to finally generate the data in Excel; (3) The data transmission is stable and the quality is high, which can provide a basis for the slope stability of zhala hydropower station; (4) The data can reflect the deformation of the high slope of zhala hydropower station, and has a wide application prospect.
XU Kunzhen
(1) The data content is the stress monitoring data of the high slope of zhala hydropower station, including the stress data of the automatic monitoring of the high slope of zhala hydropower station, which has certain guiding significance for the stability of the slope of zhala hydropower station and can provide data support for disaster prevention and reduction of zhala hydropower station; (2) The data comes from the automatic transmission of automatic monitoring equipment, and is automatically interpreted and processed by the software of monitoring and early warning platform to finally generate the data in Excel; (3) The data transmission is stable and the quality is high, which can provide a basis for the slope stability of zhala hydropower station; (4) The data can reflect the stress variation of the high slope of zhala hydropower station, and has a wide application prospect.
XU Kunzhen
Acceleration is an important parameter to reflect the dynamics of slope. Twenty-two acceleration sensors are arranged on the slope surface, lithological interface and inside the slope of the Xiaguiwa bedding rock model slope. An acceleration sensor is arranged on the shaking table to record the real acceleration state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the acceleration data set of the bedding rock model slope; The peak values of the acceleration data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action, and the ratio of the peak acceleration on the slope to the peak acceleration on the table can reflect whether the slope is enhanced or attenuated at each location under the seismic action.
GUO Mingzhu
(1) The data content is the deep displacement monitoring data of the high slope of zhala hydropower station, including the deep displacement data of the automatic monitoring of the high slope of zhala hydropower station, which has certain guiding significance for the stability of the slope of zhala hydropower station and can provide data support for disaster prevention and reduction of zhala hydropower station; (2) The data comes from the automatic transmission of automatic monitoring equipment, and is automatically interpreted and processed by the software of monitoring and early warning platform to finally generate the data in Excel; (3) The data transmission is stable and the quality is high, which can provide a basis for the slope stability of zhala hydropower station; (4) The data can reflect the deep displacement change of the high slope of zhala hydropower station, and has a wide application prospect.
XU Kunzhen
Two types of seismic waves are used as dynamic inputs, one is synthetic waves, including sine waves and synthetic waves with different transcendence probabilities; the other is natural waves, selecting Wenchuan Wolong waves and Maoxian waves. The sine wave amplitude and frequency are unique, so they can be used to study the influence of ground motion parameters on the dynamic response of slopes; the natural waves are selected from the soil layer waves recorded at Wolong station and bedrock seismic waves recorded at Maoxian station during the Wenchuan earthquake, aiming to investigate the influence of different types of seismic wave inputs on the dynamic response of rock slopes by comparing the dynamic response law of slopes under the action of two types of seismic waves. White noise was performed after each loading to analyze the natural characteristics of the slope. A 10-minute stay after each loading was used to take pictures and observe the damage of the slope.
GUO Mingzhu
A total of two types of seismic waves are used as input in the test, one type is sinel wave; the other type is natural wave, and the natural wave is adopted from Wenchuan Maoxian wave. The sine wave amplitude and frequency are unique, so it can be used to study the influence of ground motion parameters on the dynamic response of slopes. By comparing the dynamic response of slopes under the action of sine waves with different frequencies and amplitudes, the influence of the input seismic wave parameters on the dynamic response of rock slopes is investigated; the natural waves are selected from the bedrock seismic waves recorded at the Maoxian station. The seismic wave input is loaded in a step-by-step manner, firstly loading the sine wave with low amplitude, and then loading the Wenchuan Maoxian wave with 0.1g increase, and after each loading, white noise is carried out to analyze the natural characteristics of the slope. After each loading was completed, 10 minutes were spent to take pictures and observe the damage of the slope.
GUO Mingzhu
(1) Data content: This data set is based on the Xiaguiwa landslide in the Sanjiang basin of the Qinghai-Tibet Plateau, reconstructing the bedding slope of the Xiaguiwa landslide; the bedding slope of the Xiaguiwa landslide is used as a reference for shaking table model tests, which is used to design the shaking table model test model and sensor layout diagram for the bedding rock slope, with a weak rock layer in the model slope, and the sensors deployed are acceleration sensors and velocity sensors, and the measured (2) Data source and processing method: The data set is drawn by Guo Mingzhu of Beijing University of Technology using CAD software. (3) The data provide reference for the subsequent shaking table model test implementation.
GUO Mingzhu
(1) Data content: This data set is based on the Xuelongnang landslide in the Sanjiang basin of the Qinghai-Tibet Plateau, and reconstructs the counter-bedding slope before the slide; the counter-bedding slope before the slide is used as a reference for the shaking table model test, which is used to design the shaking table model test model and the sensor layout diagram for the counter-bedding rock slope, and a special joint is set in the model slope, and the deployed sensors are the acceleration sensors and the velocity sensors. (2) Data source and processing method: The data set is drawn by Guo Mingzhu of Beijing University of Technology using CAD software. (3) The data provide reference for the subsequent shaking table model test implementation.
GUO Mingzhu
Aiming at the 179000 km2 area of the pan three rivers parallel flow area of the Qinghai Tibet Plateau, InSAR deformation observation is carried out through three kinds of SAR data: sentinel-1 lifting orbit and palsar-1 lifting orbit. According to the obtained InSAR deformation image, it is comprehensively interpreted in combination with geomorphic and optical image features. A total of 949 active landslides below 4000m above sea level were identified. It should be noted that due to the difference of observation angle, sensitivity and observation phase of different SAR data, there are some differences in the interpretation of the same landslide with different data. The scope and boundary of the landslide need to be corrected with the help of ground and optical images. The concept of landslide InSAR recognition scale is different from the traditional spatial resolution and mainly depends on the deformation intensity. Therefore, some landslides with small scale but prominent deformation characteristics and strong integrity compared with the background can also be interpreted (with SAR intensity map, topographic shadow map and optical remote sensing image as ground object reference). The minimum interpretation area can reach several pixels. For example, a highway slope landslide with only 4 pixels is interpreted with reference to the highway along the Nujiang River.
YAO Xin
The data were collected from the debris flow model test system located in the plant area of Aosite Slope Protection Engineering Co., Ltd. in Qingbaijiang District, Chengdu. The system is a multifunctional large-scale test device designed and built independently, which can be used to simulate the surface dynamic mechanism and protection of geological disasters. Compared with the famous large-scale geological disaster dynamic process model test system built by the U.S. Geological Survey, the system can change the slope arbitrarily, and can observe the transformation of debris flow or debris flow flow state and structure from the side. Based on the test system, the instruments used in the pre experiment mainly include: data acquisition instrument, laser displacement sensor, impact force sensor, acceleration sensor, microseismic sensor, high-speed camera, camera, three-dimensional laser scanner and UAV.
ZHANG Shilin
This data records the construction process of large-scale physical model test platform for high-level and long-range geological hazards. The test platform is located in the plant area of Chengdu Qingbaijiang Aosite Slope Protection Engineering Co., Ltd. The system is a multifunctional large-scale test device designed and built independently, which can be used to simulate the surface dynamic mechanism and protection of geological disasters. Compared with the famous large-scale geological disaster dynamic process model test system built by the U.S. Geological Survey, the system can change the slope arbitrarily, and can observe the transformation of debris flow or debris flow flow state and structure from the side.
ZHANG Shilin
Through the self-developed debris flow impact test device (South African invention patent, authorized patent No. 2021 / 05607), the debris flow impact test is carried out and the debris flow impact test data are obtained. The data is mainly collected in Zaozhuang College from 2019 to 2021. The scientific device was used to construct the debris flow in Qipan gully in Wenchuan Strong earthquake area. The impact model test of debris flow was systematically carried out, and about 270000 test data were obtained, which provided important scientific data for the further study of debris flow dynamics in Qipan gully. The data includes the test data of debris flow impact retaining wall, the time history change characteristic data of debris flow impact, and the change characteristic data of debris flow impact signal. The data can be used to analyze the impact characteristics of debris flow under different conditions (such as slurry viscosity, solid ratio, gravel gradation, etc.)
JIAO Pengpeng
1) Data content The experimental data of indoor weir plug instability model were collected in Wenchuan County, Sichuan Province and Chengdu, Sichuan Province. The experimental analysis is mainly completed in the State Key Laboratory of geological disaster prevention and geological environment protection. The instruments used include moisture content sensor, high-speed camera, test water tank, etc. The collection time is 2019-2021 2) Data source: experimental analysis conducted by the State Key Laboratory of geological disaster prevention and geological environment protection Processing method: according to the actual particle composition of the weir plug body, the test soil with different particle sizes is screened out by a sieve analyzer, then evenly mixed together according to the weight proportion, stacked according to the predetermined size, and the sensor is buried at the fixed position. Open the valve to a constant flow of 0.25 L / s, and at the same time, open the water content sensor and two high-speed cameras for observation until the dam body is damaged and the remaining dam body is stable. After the experiment, all the experimental data were sorted and analyzed 3) The data are collected by correlation analysis instrument, which is true and reliable. 4) It can provide data support for revealing the disaster mechanism of wide moderate narrow and steep gully type debris flow in strong earthquake area; The data of maximum scouring depth, impact force, abrasion force and scouring and silting volume can provide reference for the design of debris flow disaster prevention and control engineering
余 斌
The image information data of Beichuan area in Sichuan Province, Ludian area in Yunnan Province and Bijie area in Guizhou Province can be used to construct the interpretation and identification marks of remote sensing images of mountain seismic crack and collapse, reveal the general form of mountain seismic crack and collapse, and evaluate the risk level of specific mountain seismic crack and collapse; The data can be combined with DEM data to mine the development mechanism of mountain seismic crack and collapse. On this basis, we can further study and improve the intelligent identification theory and formation mechanism of mountain seismic crack and collapse, so as to provide indicative significance for looking for the material source of other similar types of seismic crack and collapse. Some of the original data of the project can be used to fully understand the risk of earthquake cracking and collapse in Ludian area.
HAN Zheng
During the development of debris flow monitoring microwave radar prototype, a series of demonstration applications were carried out in tianmogou, Bomi County, Nyingchi Prefecture, Tibet Autonomous Region. The test alarm data and application alarm data information in the demonstration application were reported and recorded through the multi-mode communication unit. This record gives the report records during the test and application. The data is the original log records exported from the background database of the control center, which are listed in Excel table according to the display of the control center, so as to improve its readability. Because the debris flow microwave radar is a result oriented monitoring, that is, its monitoring results directly give whether there is debris flow, rather than the relevant conditions of debris flow. Therefore, this data is mainly used to determine the target recognition ability in the research and development process of debris flow monitoring microwave radar. The data can be used as a reference for the development of debris flow microwave radar.
DUAN Jiangnian
During the development of multi-mode communication unit prototype for debris flow monitoring, early warning communication and management, a series of tests were carried out in Beijing. The sensor status information, communication terminal status information, product online and offline information and alarm information in the test were reported and recorded through the multi-mode communication unit. This record gives the report record during the test. The data is the original log records exported from the background database of the control center, which are listed in Excel table according to the display of the control center, so as to improve its readability. The data can be used as a reference for the development of debris flow monitoring communication equipment.
DUAN Jiangnian
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS
0931-4967287
poles@itpcas.ac.cn
Links
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved
｜ 
No.11010502040845
Tech Support: westdc.cn
