CMIP6 is the sixth climate model comparison plan organized by the World Climate Research Program (WCRP). Original data from https://www.wcrp-climate.org/wgcm-cmip/wgcm-cmip6 。 This dataset contains four SSP scenarios of Scenario MIP in CMIP6. (1) SSP126: Upgrade of RCP2.6 scenario based on SSP1 (low forcing scenario) (radiation forcing will reach 2.6W/m2 in 2100). (2) SSP245: Upgrade of RCP4.5 scenario based on SSP2 (moderate forcing scenario) (radiation forcing will reach 4.5 W/m2 in 2100). (3) SSP370: New RCP7.0 emission path based on SSP3 (medium forcing scenario) (radiation forcing will reach 7.0 W/m2 in 2100). (4) SSP585: Upgrade the RCP8.5 scenario based on SSP5 (high forcing scenario) (SSP585 is the only SSP scenario that can make the radiation forcing reach 8.5 W/m2 in 2100). Using GRU data to correct the post-processing deviation of the original CMIP data, the post-processing data set of monthly precipitation (pr) and temperature (tas) estimates from 2046-2065 was obtained, with a reference period of 1985-2014.
YE Aizhong
As a powerful heat source, the Tibetan Plateau (TP) affects the onset, advance and retreat of the Asian monsoon, and the interaction between the westerly belt and the monsoon belt. In order to study the variation of TP thermal effect and its influence on the surrounding climate, the basic data related to TP heat source are needed. This data set is composed of monthly basic heat source data of the TP and its surrounding areas calculated from reanalysis data, and its horizontal range covers 40°E-180° and 20°S-80°N. The spatial resolution is 2.5 ° x2.5 °, and the datasets mainly included ERA5 and NCEP/NCAR reanalysis data.
LI Qingquan
The triple pole aerosol type data product is an aerosol type result obtained through a series of data pre-processing, quality control, statistical analysis and comparative analysis processes by comprehensively using MEERA 2 assimilation data and active satellite CALIPSO products. The key of the aerosol type fusion algorithm is to judge the aerosol type of CALIPSO. During the data fusion of aerosol type, the final aerosol type data (12 types in total) and quality control results in the three polar regions are obtained according to the types and quality control of CALIPSO aerosol types and referring to MERRA 2 aerosol types. The data product fully considers the vertical and spatial distribution of aerosols, and has a high spatial resolution (0.625 ° × 0.5 °) and time resolution (month).
ZHAO Chuanfeng
The Tibetan Plateau (TP) is the largest glacier enrichment area in the middle and low latitudes except the South Arctic and Greenland. The solid water body glaciers and liquid water bodies lakes and rivers together form the Asian Water Tower. The thermal and dynamic effects of the TP and their variability are one of the main driving forces for the TP to affect the Asian monsoon and global atmospheric circulation anomalies. To study the thermal properties of the TP itself and its feedback effect, it is necessary to use the results of climate model experiments to carry out the 100-year historical examination of the TP and its surrounding areas and the future 100-year prediction (temperature, precipitation, radiation, etc.). This dataset consists of grid point temperature, precipitation, radiation and other data of the TP and its surrounding areas. Its horizontal range covers 40 ° E-180 °, 20 ° S-80 ° N, and the time resolution includes annual and seasonal average. The data are based on the results of the BCC-CSM2-MR model test conducted by the National Climate Center of China in the Coupled Model Intercomparison Project Phase 6 (CMIP6), including historical, SSP126, SSP245, SSP370, and SSP585 experiments. According to the bilinear interpolation method, the data are uniformly interpolated to the resolution level of 1 ° x1 °. The data can provide basic information on regional climate and water cycle changes for the second TP investigation period, provide reference for the field investigation results, and study the possible change mechanism.
LI Qingquan
The data set is a numerical simulation data set based on CESM2.1.3 mode. The data set is global multi scenario monthly climate data. The spatial resolution is f19_ G17 atmosphere/land is 1.9x2.5 degrees, from January 2015 to December 2010, and the data is in NETCDF format. The data set includes historical data from 1850-2014 (referred to as Hist for short) and SSP scenarios (SSP126, SSP245, SSP370, SSP585). Each scenario includes three sets of climate data (default emission data CMIP6 (referred to as CMIP6 for short), China's carbon neutral CNCN (referred to as CNCN for short) CO2 emissions, and China's CH4 and N2O changes with CNCN, which are further used to drive the CESM (referred to as CNCNext for short)), The data set contains a geospatial range of - 90 ° N – 90 ° N and - 180 ° E – 180 ° E.
LI Longhui
(1) Data content: the annual mean Northern Annular mode index and the Northern Annular mode index from 1500 to 2000; (2) Data source and processing method: this data is independently produced by the author. It is based on PAGES2k data set and reconstructed by machine learning model (random forest, extreme tree, Light GBM and catboost). (3) Data quality description: the data set has high consistency with multiple instrumental data during the observed period, and the reconstruction is better. The data can be used to study the change and mechanism of the main atmospheric circulation in the northern and southern hemispheres on multiple time scales (interannual, interdecadal and multidecadal).
YANG Jiao
The Qinghai-Tibet Engineering Corridor runs from Golmud to Lhasa. It passes through the core region of the Qinghai-Tibet Plateau and is an important passage connecting the interior and Tibet. As the primary parameter in the surface energy balance, the land surface temperature represents the degree of energy and water exchange between the earth and the atmosphere, and is widely used in the research of climatology, hydrology and ecology. The annual average surface land temperature is obtained by using the four day and night observations of Aqua and Terra. Therefore, the 8-day land surface temperature synthesis products MOD11A2 and MYD11A2 with a resolution of 1km were downloaded first, and then the data were batch projected by MRT (MODIS Reprojection Tool). Finally, the annual average MODIS land surface temperature data after 2010 was calculated by IDL.
NIU Fujun
The original TIFF files of figure 1-100 of the monograph 'The Batrisini of Tibet: unveiling an enigmatic ant-loving beetle diversity at Earth’s “Third Pole” (Coleoptera, Staphylinidae, Pselaphinae)' are uploaded.
YIN Ziwei
This dataset is based on the Tibet Statistical Yearbook and Qinghai Statistical Yearbook (2020). The two books contain statistical data on the economic and social development of the Tibet Autonomous Region and Qinghai Province since 2019, mainly from 1951 to 2020. Extract the agricultural aspects, from the basic situation of rural areas and agriculture, the basic situation of rural areas, rural employees, the total output value of agriculture, forestry, animal husbandry and fishery in sub-regional cities, the sown area of main crops, the output of main agricultural products, the output per unit area of main agricultural products, and the sown area of crops It is an important statistical data for people from all walks of life at home and abroad to understand the Qinghai-Tibet Plateau and the Qinghai-Tibet Plateau.
TANG Yawei TANG Yawei
This data comes from a random questionnaire survey conducted in the one-river-two-river region of Tibet, southeastern Tibet, and Hengduan mountainous area of eastern Sichuan and Tibet during July-August 2020. The data set mainly includes agricultural waste utilization data (straw utilization and livestock and poultry wastes). Utilization methods), straw utilization methods mainly include returning to the field, fuel, feed and compost, and livestock and poultry manure utilization methods mainly include fuel and fertilizer. The interviewees were mainly adults who were familiar with the family situation. In some villages, the output was calculated in small groups. The questionnaire design is based on the principles of scientificity, applicability, feasibility, typicality and specificity, and the "Household Questionnaire" is designed for the above areas. In order to ensure the reliability and validity of the questionnaire design content, the questionnaire was pre-investigated before the formal investigation, and there were problems in further modifying and improving the questionnaire. Before the official start of the questionnaire, the investigators were given the explanation of the content of the questionnaire and the training of investigation skills.
SONG Dagang SONG Dagang
According to the data of three future scenarios of CMIP5 (RCP2.6、RCP4.5、RCP8.5), the spatial variation characteristics and temporal variation trend of the global mean annual air temperature from 2006 to 2100 are analyzed. Under rcp2.6 scenario, the mean annual air temperature shows an increasing trend, with the growth rate ranging from 0.0 ° c/decade to 0.2 ° c/decade (P<0.05), the growth in high latitude regions is faster, ranging from 0.1 ° c/decade to 0.2 ° C / decade. Based on the spatial and temporal characteristics of the mean annual air temperature in the northern hemisphere in the 21st century, under different scenarios, the mean annual air temperature shows a warming trend, and the high latitudes show a more sensitive and rapid growth.
NIU Fujun
This dataset is about the historical yield data (yield per unit area and sown area) of the main crops (hull-less barley and wheat) on Tibetan Plateau between years 1988-2018, covering some prefectures and cities located in Tibetan Plateau. The data are obtained from Tibet Statistical Yearbook, Qinghai Statistical Yearbook, Sichuan Statistical Yearbook, Gansu Statistical Yearbook, Yunnan Statistical Yearbook and the aba Tibetan and Qiang Autonomous Prefecture and Ganzi Tibetan Autonomous Prefecture Agriculture and Animal Husbandry Bureau with the same accuracy. Hull-less barley and wheat are the main crops on the Tibetan Plateau. This data set is of great value for the study of food security and agricultural production on Tibetan Plateau.
PAN Zhifen
The data from the Digital Mountain Map of China depicts the spatial pattern and complex morphological characteristics of mountains in China from a macro scale, including the mountains’ spatial distribution, classification, morphological elements and area ratio. It is a set of basic data that can be used for mountain zoning, mountain genetic classification and resource environment correlation analysis. Mountains carry great natural resource supply, provide ecological service and regulation functions, and play an important part in eco-civilization construction and socioeconomic development in China. Lately，Prof. Li Ainong of the Institute of Mountain Hazards and Environment, CAS, developed this data set based on the spatial definition of mountains, an a topography adaptive slide window method for the relief amplitude. The data include: (1) Spatial distribution of mountains in China; (2) Mountain classification; (3) Main mountain ranges (with range alignment, relief grade and ridge morphology); (4)Main mountain peaks; (5)Mountain proportion table of the provinces/autonomous regions/municipalities of China; (6) Contour zoning data; (7) General situation of mountain formation; (8)Mountain division and zoning data; (9) List of main mountain peaks. The spatial resolution of the original DEM source is about 90m. And the boundaries of mountains have been revised with multisource remote sensing data, which has good spatial consistency with the relief shading map. The cartographic generalization accuracy of mountain ranges and relevant features is 1:1 000 000. Mountain features in this data set have higher spatial resolution and pertinence, which are available for the zonality of mountain environment and mountain hazards, and the spatial analysis for ecological, production and living spaces in mountain areas, surpporting macro decision-making on mountain areas' development in China. p
NAN Xi , LI Ainong , DENG Wei
1) Soil environmental quality data of typical industrial parks in Huangshui basin of Qinghai Province provide basic support for soil pollution control caused by regional industrial activities; 2) The data source is the soil samples of typical areas in Huangshui River Basin. After collection, the samples are quickly stored in the refrigerator at - 4 ℃ and sent to the laboratory as soon as possible. After pretreatment, the relevant parameters are tested; 3) The process of sample collection and transportation meets the specifications, and the experimental detection process strictly follows the relevant standards. Due to the changes of various factors of soil environment, the results are only aimed at the investigation results; 4) The data can be used to analyze regional soil pollution and heavy metal risk assessment;
WANG Lingqing
This data is the plant diversity and distribution data of chnz016 grid on Qinghai Tibet Plateau, including the Chinese name, Latin name, latitude and longitude, altitude, collection number, number of molecular materials, number of specimens, administrative division, small place, collector, collection time and creator of plants in this grid. The data is obtained from e scientific research website（ http://ekk.kib.ac.cn/web/index/#/ ）And partially complete the identification. This data has covered the list and specific distribution information of all plants in this flora. This data can be used not only to study the floristic nature of this region, but also to explore the horizontal and vertical gradient pattern of plants in this region.
DENG Tao
This data is the plant diversity and distribution data of chnac006 grid on the Qinghai Tibet Plateau, including the Chinese name, Latin name, latitude and longitude, altitude, collection number, number of molecular materials, number of specimens, administrative division, small place, collector, collection time and creator of plants in this grid. The data is obtained from e scientific research website（ http://ekk.kib.ac.cn/web/index/#/ ）And partially complete the identification. This data has covered the list and specific distribution information of more than 600 species of plants in more than 200 genera and 91 families in this flora. This data can be used not only to study the floristic nature of this region, but also to explore the horizontal and vertical gradient pattern of plants in this region.
DENG Tao
1. The total number is the unified number of the survey year, such as 17-001 (the first survey point in 2017), and the field number is the single field number. 2. Time: Beijing time at the time of measurement, such as: 13:25, August 1, 2017 (13:25, August 1, 2017). 3. Geographical location: the longitude and latitude of the measuring point, such as 29.6584101.0884 (29.6584 ° n, 101.0884 ° E), which is measured by Garmin 63sc GPS in the field. 4. Altitude: the absolute altitude of the measuring point, such as 4500m (4500m above sea level), is measured by Garmin 63sc GPS in the field with an accuracy of 1m. 5. Measured vegetation coverage (%): measured in the field with quadrat (1000 m * 1000 m). 6. Atmospheric pressure: measured by dph-103 intelligent digital temperature and humidity barometer in the field, such as 651.7kpa, accuracy: 0.1 kPa. 7. Air temperature: measured by dph-103 intelligent digital temperature, humidity and barometer in the field, such as 15.61 ℃, accuracy: 0.01 ℃. 8. Relative humidity: measured by dph-103 intelligent digital temperature, humidity and barometer in the field, such as 79.1%, accuracy: 0.1%. 9. Relative oxygen content: measured by td400-sh-o2 portable oxygen detector in the field, such as 20.16%, accuracy: 0.01%. Among them, the altitude of sampling points 17-001 to 17-065 is measured by Garmin Oregon 450 GPS with an accuracy of 1 m; The atmospheric pressure is measured by Casio prg-130gc barometer with an accuracy of 5 HPA; The relative oxygen content is measured by cy-12c digital oxygen meter, with a range of 0-50.0%, a resolution of 0.1% and an accuracy of ± 1%.
SHI Peijun
This data is the plant diversity and distribution data of chnyb013 grid on the Qinghai Tibet Plateau, including the Chinese name, Latin name, latitude and longitude, altitude, collection number, number of molecular materials, number of specimens, administrative division, small place, collector, collection time and creator of plants in this grid. The data is obtained from e scientific research website（ http://ekk.kib.ac.cn/web/index/#/ ）And partially complete the identification. This data has covered a large number of plant catalogues and specific distribution information in this flora. This data can be used not only to study the floristic nature of this region, but also to explore the horizontal and vertical gradient pattern of plants in this region.
DENG Tao
This data is the plant diversity and distribution data of the chnab005 grid on the Qinghai Tibet Plateau, including the Chinese name, Latin name, latitude and longitude, altitude, collection number, number of molecular materials, number of specimens, administrative division, small place, collector, collection time and creator of the plants in this grid. This data is obtained from e-Science website（ http://ekk.kib.ac.cn/web/index/#/ ）And partially complete the identification. This data has covered the list of plants in this flora and the specific distribution information. This data can be used not only to study the floristic nature of this region, but also to explore the horizontal and vertical gradient pattern of plants in this region. What is different from last year is that the grid with the most scientific research data this year has changed, which may be affected by the epidemic or the environment.
DENG Tao
The Wuyu Basin is bounded by the Gangdese Mountains to the north and the Yarlung Tsangpo River to the south, and is a representative basin to study the Cenozoic tectonism of the southern Tibet. The sedimentary strata in the Wuyu Basin include the Paleocene-Eocene Linzizong Group volcanics and the Oligocene Rigongla Formation (Fm.) volcanics, the Miocene lacustrine sediments of the Mangxiang Fm. and Laiqing Fm. volcanics, the late Miocene-Pliocene Wuyu Fm., and the Pleistocene Dazi Fm. Five sandstone samples from the Mangxiang Fm., Wuyu Fm. and Dazi Fm. and one modern Wuyu reiver sand sample were collected for detrital zircon U-Pb dating using the LA-ICP-MS method. Detrital zircon U-Pb ages in the Mangxiang Fm. show a large cluster at 45-80 Ma; those in the Wuyu Fm. show a large cluster at 8-15 Ma and a subsidiary cluster at 45-70 Ma; those in the Dazi Fm. show three large clusters at 45-65 Ma, 105-150 Ma and 167-238 Ma; and those in modern Wuyu river show a large cluster at 8-15 Ma and a subsidiary cluster at 45-65 Ma (Figure 1). Late Cretaceous-early Eocene zircons in all samples are consistent with the most prominent stage of magmatism of the Gangdese Mountains; the 8-15 Ma zircons in the Wuyu Fm. and modern Wuyu river are consistent with the magmatism of the Laiqing Fm.; and the Triassic-Jurassic zircons in the Dazi Fm. are consistent with the magmatism of the central Lhasa terrane. The results of detrital zircon U-Pb ages and sedimentary facies analyses in the Wuyu Basin indicate that the southern Tibetan Plateau suffered multi-stage tectonism-magmatism since the India-Asia collision: (1) Paleogene Linzizong Group-Rigongla Fm. volcanics; (2) tectonism-magmatism at ~15 Ma ended the lacustrine sediments of the Mangxiang Fm. and resulted in volcanism of the Laiqing Fm.; (3) tectonism at ~8 Ma resulted in the volcanic rocks of the Laiqing Fm. becoming one of the main provenances for the overlying Wuyu Fm.; (4) the Wuyu Basin formed braided river and received sediments from the central Lhasa terrane to its north at ~2.5 Ma. The geomorphic pattern of the southern Tibet has gradually formed since the Quaternary.
MENG Qingquan MENG Qingquan
The Qinghai-Tibet Plateau is the source of many major rivers in Asia, providing essential water for hundreds of millions of people, and is known as the "Water Tower of Asia". The main source of water recharge for the Asian Water Tower is precipitation from the Tibetan Plateau, of which the Tibetan Plateau vortex (TPV) is one of the important precipitation-producing systems on the Tibetan Plateau. Due to the complex topography of the Tibetan Plateau and the lack of observational data, there are still many gaps in the understanding of the climatic and structural characteristics of the TPVs and their formation and change mechanisms. This dataset uses multiple sets of reanalysis data and objective identification methods to obtain a long time series TPVs dataset, including the location, radius, intensity, life history, and movement path and other characteristics. The reanalysis datasets used in the dataset are: NCEP1 (NCEP/NCAR), NCEP2 (NCEP/DOE), ERA-Interim, ERA-40, ERA-5, CFSR, MERRA2, JRA55, NCEP FNL, CRA40, etc. NCEP1 and NCEP2 have lower resolution and the obtained highland low vortices are not applicable as climate feature analysis.
LIN Zhiqiang , LIN Zhiqiang, GUO Weidong GUO Weidong
The Central Asia West Asia economic corridor is dominated by deserts, mountains and plateaus, with an average altitude of about 1000m. The climate is extremely arid, the desert distribution area is large, the ecology is fragile, the dry and hot season lasts for a long time, up to 7 months, and the annual average rainfall is only 150mm at most. There are great differences in natural environment and complex geological conditions in the area. Under the compound driving action of regional differentiated structure, earthquake, meteorology, hydrology and ecology, debris flow and landslide are widely distributed in the corridor. Based on remote sensing images, the landslide and debris flow disasters in China Central Asia West Asia economic corridor are interpreted. Statistics show that 303 landslides and 2159 debris flow disasters are developed in China Central Asia West Asia economic corridor. Debris flows mainly include freeze-thaw debris flow, ice water debris flow and rainstorm debris flow.
ZOU Qiang
The Human Development Index (HDI) was developed by the United Nations Development Programme (UNDP) in the Human Development Report 1990 to measure the level of economic and social development of the United Nations member countries. The HDI is a composite indicator based on three basic variables: life expectancy, educational attainment and quality of life, and is calculated according to a certain methodology. "The One Belt One Road (OBOR) human development resilience dataset is a comprehensive indicator of human development resilience in each country. "The human development resilience dataset for countries along the Belt and Road is a comprehensive diagnosis based on sensitivity and adaptability analysis using year-by-year data of the Human Development Index for countries along the Belt and Road from 2000 to 2020. The Human Development Resilience Indicator (HDRI) data was prepared based on sensitivity and adaptation analysis. Please refer to the documentation for the methodology of preparing the dataset. "The Human Development Resilience Dataset for countries along the Belt and Road is an important reference for analysing and comparing the current state of human development resilience in each country.
XU Xinliang
Velocity is an important parameter to reflect the dynamics of slope. A velocity sensors are arranged on the top of slope of the Xiaguiwa bedding rock model slope. A velocity sensor is arranged on the shaking table to record the real velocity state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the velocity data set of the bedding rock model slope; The peak values of the velocity data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action. The ratio of the peak velocity on the slope to the peak velocity on the table reflects the enhancement level of the velocity response of the slope top under seismic action.
GUO Mingzhu
Displacement is an important parameter to reflect the dynamics of slopes. Six acceleration sensors on the interface of weak and hard lithology and three acceleration sensors on the slope surface of the Xiaguiwa bedding rock model slope were selected as the study samples. The acceleration data of the study samples were processed by filtering, noise reduction and screening, and then quadratic integration and zero line callback were performed to calculate the peak displacement under the amplitude of 0.3g~0.8g Maoxian wave, and the displacement data set of the shaking table model test was obtained for the bedding rock model slope; the two sets of data on the weak and hard lithology interface can reflect the influence of the weak rock layer on the displacement of the bedding rock slope under the seismic action; The two sets of data on the interface of weak and hard lithology can reflect the influence of weak rock layer on the displacement of the bedding rock slope under the seismic effect; The set of data on the slope table can reflect the displacement relationship of various positions on the slope table;
GUO Mingzhu
Displacement is an important parameter reflecting the characteristics of slope dynamics. The displacement data set is obtained by arranging one displacement measurement point at each of the toe, middle, shoulder and top of the counter-bedding model slope, collecting displacement data every one minute, correcting the collected data and deleting the abnormal data at the end of each point, and obtaining the displacement data set of the counter-bending rock slope shaking table model test; The displacement data set of the model slope under the same working condition can reflect the relationship between the displacement of the toe, middle, shoulder and top of the slope under such seismic action, and the displacement data set of the model slope under different working conditions can reflect the damage mechanism of the counter-beddomg rock slope with the accumulation of seismic action.
GUO Mingzhu
This data is mainly for on-site monitoring and collection of micro-seismic wave signals generated when rock fracture or dislocation occurs in the slope body. For data collection, four three-component geophones (G1-G4) arranged on site transmit the picked signals to the collector, which converts the received analog signals into digital signals, and transmits the collected microseismic data to the control system through 4G wireless network. Waveform processing software Trace and Vantage were used to interpret and analyze the collected microseismic wave signals, so as to determine the location, magnitude, quantity and energy release of microseismic events. The spatial distribution and spatial-temporal evolution characteristics of microseismic events can be obtained through sorting and analysis of the data. Combined with the change law of historical parameters, the macroscopic fracture state of rock mass in different periods can be revealed, which provides a basis for the stability evaluation of The Baige slope.
CHEN Fei
Velocity is an important parameter to reflect the dynamics of slope. A velocity sensors are arranged on the top of slope of the Xuelongnang counter-bedding rock model slope. A velocity sensor is arranged on the shaking table to record the real velocity state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the velocity data set of the counter-bedding rock model slope; The peak values of the velocity data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action. The ratio of the peak velocity on the slope to the peak velocity on the table reflects the enhancement level of the velocity response of the slope top under seismic action.
GUO Mingzhu
Acceleration is an important parameter to reflect the dynamics of slope. Fifteen acceleration sensors are arranged on the slope surface, lithological interface and inside the slope of the Xuelongnang counter-bedding rock model slope. An acceleration sensor is arranged on the shaking table to record the real acceleration state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the acceleration data set of the counter-bedding rock model slope; The peak values of the acceleration data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action, and the ratio of the peak acceleration on the slope to the peak acceleration on the table can reflect whether the slope is enhanced or attenuated at each location under the seismic action.
GUO Mingzhu
Acceleration is an important parameter to reflect the dynamics of slope. Twenty-two acceleration sensors are arranged on the slope surface, lithological interface and inside the slope of the Xiaguiwa bedding rock model slope. An acceleration sensor is arranged on the shaking table to record the real acceleration state of the input seismic wave. The collected data are filteringed, noise reduction, screened and other processing steps to obtain the acceleration data set of the bedding rock model slope; The peak values of the acceleration data of the model slope under the same load condition can reflect the dynamic response law of the slope under such seismic action, and the ratio of the peak acceleration on the slope to the peak acceleration on the table can reflect whether the slope is enhanced or attenuated at each location under the seismic action.
GUO Mingzhu
Two types of seismic waves are used as dynamic inputs, one is synthetic waves, including sine waves and synthetic waves with different transcendence probabilities; the other is natural waves, selecting Wenchuan Wolong waves and Maoxian waves. The sine wave amplitude and frequency are unique, so they can be used to study the influence of ground motion parameters on the dynamic response of slopes; the natural waves are selected from the soil layer waves recorded at Wolong station and bedrock seismic waves recorded at Maoxian station during the Wenchuan earthquake, aiming to investigate the influence of different types of seismic wave inputs on the dynamic response of rock slopes by comparing the dynamic response law of slopes under the action of two types of seismic waves. White noise was performed after each loading to analyze the natural characteristics of the slope. A 10-minute stay after each loading was used to take pictures and observe the damage of the slope.
GUO Mingzhu
A total of two types of seismic waves are used as input in the test, one type is sinel wave; the other type is natural wave, and the natural wave is adopted from Wenchuan Maoxian wave. The sine wave amplitude and frequency are unique, so it can be used to study the influence of ground motion parameters on the dynamic response of slopes. By comparing the dynamic response of slopes under the action of sine waves with different frequencies and amplitudes, the influence of the input seismic wave parameters on the dynamic response of rock slopes is investigated; the natural waves are selected from the bedrock seismic waves recorded at the Maoxian station. The seismic wave input is loaded in a step-by-step manner, firstly loading the sine wave with low amplitude, and then loading the Wenchuan Maoxian wave with 0.1g increase, and after each loading, white noise is carried out to analyze the natural characteristics of the slope. After each loading was completed, 10 minutes were spent to take pictures and observe the damage of the slope.
GUO Mingzhu
(1) Data content: This data set is based on the Xiaguiwa landslide in the Sanjiang basin of the Qinghai-Tibet Plateau, reconstructing the bedding slope of the Xiaguiwa landslide; the bedding slope of the Xiaguiwa landslide is used as a reference for shaking table model tests, which is used to design the shaking table model test model and sensor layout diagram for the bedding rock slope, with a weak rock layer in the model slope, and the sensors deployed are acceleration sensors and velocity sensors, and the measured (2) Data source and processing method: The data set is drawn by Guo Mingzhu of Beijing University of Technology using CAD software. (3) The data provide reference for the subsequent shaking table model test implementation.
GUO Mingzhu
(1) Data content: This data set is based on the Xuelongnang landslide in the Sanjiang basin of the Qinghai-Tibet Plateau, and reconstructs the counter-bedding slope before the slide; the counter-bedding slope before the slide is used as a reference for the shaking table model test, which is used to design the shaking table model test model and the sensor layout diagram for the counter-bedding rock slope, and a special joint is set in the model slope, and the deployed sensors are the acceleration sensors and the velocity sensors. (2) Data source and processing method: The data set is drawn by Guo Mingzhu of Beijing University of Technology using CAD software. (3) The data provide reference for the subsequent shaking table model test implementation.
GUO Mingzhu
This data is the inclinometer monitoring data of Baige landslide in Jinshajiang River, which mainly considers the deep deformation monitoring of the landslide. Combined with the site geological conditions, three monitoring profiles are arranged, with a total of 7 boreholes, more than 600 meters in total, and the boreholes are vertically distributed. The field manual monitoring method is adopted, and the data is processed with Excel software. The data show that shear zones have been formed in some boreholes. Combined with the field macro deformation and geological drill hole histogram analysis, the position of the formed shear zone is consistent with the field geological situation, which proves the reliability of the data. At the same time, the displacement of shear band is further analyzed, and the deformation does not converge. Through the analysis of the data, the depth range, monitoring and early warning of the crack area of Baige landslide are determined, and technical support is provided for landslide treatment.
CHEN Fei
Through the investigation of tourist spots, tourist routes and tourist areas at different levels, form photos and video data of tourism resources, tourism services and tourism facilities of scenic spots, scenic spots, corridors and important tourism transportation nodes, tourism villages and tourism towns, record the tourism development status, find problems in tourism development, and form corresponding ideas for the construction of world tourism destinations; The data sources are UAV, tachograph and camera, mobile phone and GPS, and are divided into different folders according to scenic spots and data categories; The data has been checked for many times to ensure its authenticity; This data can provide a traceable basis for the construction of world tourism destinations on the Qinghai Tibet Plateau.
SHI Shanshan
After the debris flow flexible protection system intercepts the debris flow disaster, the UAV tilt photography is carried out on the disaster slope. After the three-dimensional model of the slope is established with the help of terrain reconstruction software such as context capture, the protection process is inversely calculated, and the mechanical response history of each component of the structure is obtained through calculation, so as to obtain the wire rope tension, steel column internal force, system buffer distance The residual protection height of the system, the deformation of energy dissipator and the deformation of steel column provide a reference for the performance evaluation and optimization design of the protection system.
QI Xin
During the development of debris flow monitoring microwave radar prototype, a series of demonstration applications were carried out in tianmogou, Bomi County, Nyingchi Prefecture, Tibet Autonomous Region. The test alarm data and application alarm data information in the demonstration application were reported and recorded through the multi-mode communication unit. This record gives the report records during the test and application. The data is the original log records exported from the background database of the control center, which are listed in Excel table according to the display of the control center, so as to improve its readability. Because the debris flow microwave radar is a result oriented monitoring, that is, its monitoring results directly give whether there is debris flow, rather than the relevant conditions of debris flow. Therefore, this data is mainly used to determine the target recognition ability in the research and development process of debris flow monitoring microwave radar. The data can be used as a reference for the development of debris flow microwave radar.
DUAN Jiangnian
During the development of multi-mode communication unit prototype for debris flow monitoring, early warning communication and management, a series of tests were carried out in Beijing. The sensor status information, communication terminal status information, product online and offline information and alarm information in the test were reported and recorded through the multi-mode communication unit. This record gives the report record during the test. The data is the original log records exported from the background database of the control center, which are listed in Excel table according to the display of the control center, so as to improve its readability. The data can be used as a reference for the development of debris flow monitoring communication equipment.
DUAN Jiangnian
During the development of debris flow monitoring microwave radar prototype, a series of tests were carried out in Beijing. The alarm data information in the test was reported and recorded through the multi-mode communication unit. This record gives the report record during the test. The data is the original log records exported from the background database of the control center, which are listed in Excel table according to the display of the control center, so as to improve its readability. Because the debris flow microwave radar is the result oriented line monitoring, that is, the monitoring results directly give whether there is debris flow, rather than the relevant conditions of debris flow. Therefore, this data is mainly used to determine the target recognition ability in the research and development process of debris flow monitoring microwave radar. The data can be used as a reference for the development of debris flow microwave radar.
DUAN Jiangnian
Sand cushion is often used to be arranged on the top of shed tunnel structure to protect highway and railway from rockfall. In order to improve the impact energy, thick cushion is often used, which increases the construction cost. In this study, geogrid is used as reinforcement material to improve the impact resistance of sand cushion without increasing the thickness of sand layer. In order to study the effects of different grid reinforcement positions and layers on the impact performance, indoor impact tests were carried out. The test results show that the geogrid with reinforcement in the appropriate position can reduce the impact force, disperse the impact stress in the sand layer, reduce the vibration of the plate and increase the impact time. In this test, the position where the sand cushion is one-third away from the bottom is the optimal reinforcement position. At the same time, the grid should be a certain distance from the top surface of the sand layer to ensure a certain energy absorption capacity. When the thickness of sand cushion is thin, the multi-layer geogrid reinforced sand cushion should be used carefully. The data content includes: rockfall impact force, impact stress at the bottom of sand cushion, and deformation of bottom plate of sand cushion. The impact force is obtained by multiplying the acceleration and mass collected by the acceleration sensor; The impact stress is obtained by the stress sensor; The deformation of the plate is obtained by the acceleration sensor at the bottom of the plate.
JIANG Qinghui
This data is mainly the data collection of mechanical properties of anti slide pile structure, including bearing capacity, displacement, strain of reinforcement and steel strand, and monitoring of prestress, which is used to analyze various performance indexes of bending and shear resistance of the structure and optimize the structural design; This experiment is mainly completed by scaling the anti slide pile components and loading them with MTS machine for four point bending. The data are collected by static strain acquisition instrument based on force sensor, displacement gauge, strain gauge, optical fiber monitoring and anchor cable dynamometer. Due to the effect of end iron block on the dispersion of prestress transmission, The change of prestress in the whole process of loading has not been completely monitored, and the other data have been analyzed and processed to obtain the corresponding law. The corresponding laws can be obtained by sorting and analyzing the data, which provides some design basis for the application of this kind of prestressed steel strand anti slide pile.
JIANG Qinghui
The scientific data of target monitoring based on visible light comes from the application demonstration sites of Julong ditch and kadacun ditch and the prototype research and development site. It is collected by Haikang camera equipment. The main content of the data is to monitor the dumping of targets and personnel shielding on site, It is used to test the on-site algorithm software - the communication between the visible light based debris flow monitoring system and the host computer software of the visible light system, and whether the data reporting is normal under the conditions of target dumping alarm, shielding target alarm and shielding target unblocking, and the data can provide a data basis for subsequent algorithm research without re collection. Data is raw video data without processing, which can be used for AI intelligent analysis technology research.
HU Yuyu
The animal and plant remains unearthed from archaeological sites are important materials to understand and understand the relationship between ancient humans and animals and plants, restore the ancient human lifestyle and economic basis, and reveal the development process and dynamic mechanism of human culture. Systematic animal Archaeology and plant archaeology analysis were carried out on the jijunbu site in the early Holocene and the Zongri site in the middle and late Holocene in the northeast of the Qinghai Tibet Plateau. The analysis of 11 animal fossils in jijunbu showed that ancient humans in the northeast of the Qinghai Tibet Plateau mainly hunted large and medium herbivorous mammals during the last interglacial period. The charcoal analysis results of Zongri site show that the ancestors of Zongri site widely collected the surrounding spruce, poplar and seabuckthorn as fuel.
DONG Guanghui , ZHANG Dongju
The data includes ecological policy documents after 1979, involving laws, regulations, terms and schemes on Ecological Governance and ecological management at the national and local government levels. The data combed the evolution process of the country in ecological and environmental governance, as well as the environmental strategies established in different development periods. The research group collected various documents of ecological policies on the government's official website and local yearbooks every year from 2018 to 2021. In order to ensure the relative integrity and pertinence of the data, this study sorted and selected the policy texts according to the following principles: ① the main sources of policies are the government's official website and its subordinate departments; ② Documents in line with ecological policies; ③ Select laws and regulations, plans, opinions, methods, detailed rules, regulations, announcements, notices, resolutions and other documents reflecting ecological environment policies. Construct the categories of the policy documents studied, that is, determine the perspective of analyzing the policy text, and define the primary and secondary categories, so that the chief coder and sub coder can understand it uniformly; ② Code the policies one by one after preparing the coding table according to the main category, that is, after carefully reading the policy content, if its content meets the analysis dimension required by the category construction table, fill its code into the coding table; ③ The data of this study is based on the official website and field policy research, which can effectively distinguish the contents of categories involved in the policy text. Therefore, the content analysis of this study has a good level of validity The innovation and evolution of policies change the impact of human activities on the environment to a certain extent, and the guidance and impact of ecological policies on environmentally vulnerable areas are more obvious. If we can fully grasp the dynamic change process of ecological policies and understand the evolution law of ecological policies, we can formulate ecological policies conducive to improving the environment, This paper studies the evolution law of Qilian mountain ecological policy issued since 1979 by using the content analysis method, in order to provide a scientific basis for the formulation of Qilian mountain ecological policy
DING Wenguang , XIE Shuntao
To understand the potential impact of projected climate changes on the vulnerable agriculture in Central Asia (CA) in the future, six agroclimatic indicators are calculated based on the 9km-resolution dynamical downscaled results of three different global climate models and a high-resolution projection dataset of agroclimatic indicators over CA is produced. These indicators are growing season length (GSL, days), biologically effective degree days (BEDD, ℃), frost days (FD, days), summer days (SU, days), warm spell duration index (WSDI, days), and tropical nights (TR, days). The periods are 1986-2005 and 2031-2050. The spatial resolution is 0.1°. As all the indicators except WSDI are defined with absolute temperature thresholds and particularly sensitive to the systematics biases in the model data, the quantile mapping (QM) method is applied to correct the simulated temperature. Results show the QM method largely reduces the biases in all the indicators. GSL, SU, WSDI, and TR will significantly increase over CA and FD will decrease. However, changes in BEDD are spatially heterogeneous, with the increases in northern CA and the mountainous areas and decreases in the southern and middle part of the plain areas. This dataset can be applied for assessing the future risks in the local agriculture for climate changes and will be beneficial to adaption and mitigation actions for food security in this region.
QIU Yuan QIU Yuan
Ecosystem productivity resilience reflects the level of ecosystem productivity resilience in the countries along the Belt and Road, with higher values indicating greater ecosystem productivity resilience in the countries along the Belt and Road. Ecosystem productivity resilience data were prepared with reference to the global medium resolution vegetation gross primary productivity dataset from 2000-2015, with a spatial resolution of 0.05° and a temporal resolution of 1 year. The products were prepared based on sensitivity and adaptability analysis, using year-by-year data on total primary productivity of vegetation in the countries along the Belt and Road from 2000 to 2015, and through comprehensive diagnostics to generate ecosystem productivity resilience products.
XU Xinliang
Based on the distribution locations of the Qinghai toad-headed lizard (Phrynocephalus vlangalii) collected by field investigation and literature investigation, combined with five climate factors from WorldClim database, the current (1960-1990) and future (2061-2080) climate data were input into the trained species distribution model to predict the current and future suitable habitats. The prediction results shows that the lizard will lose a lot of original habitats under the climate change, and the protection measures for the lizard species should focus on the eastern margin of Qinghai-Tibet Plateau, the northern and eastern parts of Qaidam Basin. The model also predicts that after the climate change, new suitable habitats will appear in areas that were not suitable for the Qinghai toad-headed lizard. However, due to the very limited diffusion ability of reptiles (the maximum annual diffusion distance recorded in the literature is less than 500m), the newly emerging suitable habitats may not be used by the Qinghai toad-headed lizard. Meanwhile, based on the physiological, life history, behavior and morphological data of three altitudinal populations of the Qinghai toad-headed lizard collected by field work, and combined with microclimate data, the physiological consequences of climate change on the Qinghai toad-headed lizard in the current suitable distribution area were predicted by using the mechanism niche model. The prediction results of the model show that, whether in the SSP245 or SSP585 climate change scenarios, the activity time of the lizard will increase in most areas (> 93%) of the current suitable distribution area, and the thermal safety threshold will decrease in all places of the current suitable distribution area. The increase of activity time of high-altitude populations is less than that of low-altitude populations, but the decrease of thermal safety threshold is greater than that of low-altitude populations. The results reveal that climate change may have a greater impact on lizard populations in high altitude areas.
ZENG Zhigao
1) Data content: the value data set of ecological assets of Qinghai Tibet plateau for five periods from 2000 to 2020, once every five years. The contents include Water Yield, Soil Retention, Carbon Fixation, Climate Regulation, and Biodiversity potential ecological asset flows. 2) Data source and processing method: Based on land use data products. See the description document for the processing method. 3) Data quality description: the data from 2000 to 2015 evaluate the land use data products released by ourselves, and the data in 2020 is the predicted value of land use data products. 4) Results and prospects of data application: provide spatial location guidance for the optimization of ecological security barrier and the management of natural resources and assets on the Qinghai Tibet Plateau.
LIU Yanxu
Based on the historical daily maximum temperature data and reanalysis data set of stations, a daily maximum temperature statistical downscaling model based on first-order autoregressive and multiple linear regression models is developed. Driven by the IPCC cmip6 scenario data of the global climate model (cnrm-cm6-1), the statistical downscaling model predicts the number of five heat wave indexes (heat wave events) of 65 stations in Central Asia from 2015 to 2100 (HWM), heat wave frequency (HWF), heat wave intensity (HWM), maximum duration of heat wave (HWD), heat wave amplitude (HWA)). Finally, the heat wave change scenario data sets of 65 stations in Central Asia under four emission scenarios (ssp126, ssp245, ssp370, ssp585) from 2015 to 2100 were obtained.
FAN Lijun
Rainfall erosivity is one of the important basic data to quantify soil erosion in the Tibet Plateau. High precision rainfall erosivity data is the key to understand the current situation of soil and water loss in theTibet Plateau and formulate soil and water conservation measures. Meanwhile, it can provide a powerful reference for the prevention and control of geological disasters in the Tibet Plateau. Based on the 1-min dense precipitation observations and the grid precipitation product, a new annual rainfall erosivity dataset in Tibet Plateau from 1950 to 2020 is constructed through the steps of correction, reconstruction and validation. This dataset is the rainfall erosivity data set with the highest accuracy and the longest time series in the Tibet Plateau.
CHEN Yueli
This data set includes a small vertebrate detection system and trigger sensor data set deployed in Heshan hilly comprehensive test station of Chinese Academy of Sciences. The system is deployed in Heshan hilly comprehensive test station Park (112 ° 53'58 "E, 22 ° 40'39" n), with a time span (November 2019-may 2021). The system consists of a flexible pressure sensor array (25cm * 25cm), a scanning circuit, a controller, a control system unit based on a mobile phone board, that is, a smart camera (driven by the trigger signal output by the pressure sensor, the camera is controlled to automatically take pictures, record and record, and upload data). A total of 72 valid and non repetitive animal photos were collected by the system. 1. Small wild animals in the installation site of Heshan hilly comprehensive test station of Chinese Academy of Sciences. When wild animals appear on the flexible pressure sensor, the acquisition is triggered once. 2. Data source: "development of terrestrial vertebrate monitoring equipment", 2016yfc0500104, completed by: Chengdu Institute of biology, Chinese Academy of Sciences, raw data, unprocessed. 3. Photo data can be divided into motion trigger and static pressure trigger. The former requires the moving distance of the animal on the flexible pressure sensor to be greater than the set threshold to prevent repeated trigger when the animal is stationary; the latter refers to that the animal generates pressure on the flexible pressure sensor, that is, it is triggered all the time. This data set is the data in motion trigger mode. 4. This data can be used to record the population number of small wild animals in a certain area (similar to the sensing trap method). Combined with the relevant data of ecological factors, it can be used to analyze the population number and circadian rhythm of small wild animals.
FANG Guangzhan
The data includes: zooplankton species list; zooplankton density; microscopy; high-throughput sequencing; complete data; constructing an original data set for lakes on the Qinghai-Tibet Plateau. Zooplankton is an indispensable link in lake water ecological investigation, and it is a link between the system The location of the food web is an important carrier for the material circulation and energy flow of the food web. The systematic investigation and study of the composition and biodiversity of the zooplankton in the lakes on the Qinghai-Tibet Plateau is particularly important for understanding the stability and resilience of the lake ecosystem on the Qinghai-Tibet Plateau. In addition, Zooplankton are very sensitive to environmental changes, and changes in their structure and functional groups can indicate the intensity and magnitude of environmental pressure.
LI Yun
The Third Pole 1:100,000 settlements distribution data set：Settlements（Tibet_Cities)、Capitals（Tibet_Capitals）、Cities up to 75K（Tibet_Cities_up_to_75K）vector space data set and its attribute name：Cities Name(ENG_NAME)、 urban population（CITY_POP) The data comes from the 1:100,000 ADC_WorldMap global data set，The data through topology, warehousing and other data quality inspection，Data through the topology, into the library，It's comprehensive, up-to-date and seamless geodigital data. The world map coordinate system is latitude and longitude, D_WGS_1984 datum surface
ADC WorldMap
The 1:1,000,000 Antarctic settlements data set includes vector spatial data of Antarctic settlements and its related attributes：City name (ENG_NAME), city population (CNTEY_NAME), (CNTRY_CODE), etc. The data comes from the 1:100,000 ADC_WorldMap global data set，The data through topology, warehousing and other data quality inspection，Data through the topology, into the library，It's comprehensive, up-to-date and seamless geodigital data. The world map coordinate system is latitude and longitude, WGS84 datum surface，Antarctic specific projection parameters（South_Pole_Stereographic）.
ADC WorldMap
The data set of 1:100,000 settlements in the Arctic includes all settlements in the North Pole (Arctic_Resident), capital settlements (Arctic_Capitals), Cities_up_to_75K settlements and other vector spatial data and related attribute data: urban name (ENG_NAME), CITY_POP and other properties. The data comes from the 1:100,000 ADC_WorldMap global data set，The data through topology, warehousing and other data quality inspection，It's most comprehensive, current and seamless geographic digital data for the whole earth. The world map coordinate system is latitude and longitude, WGS84 datum surface，Arctic specific projection parameters（North_Pole_Stereographic）.
ADC WorldMap
Qinghai Lake is the largest inland salt water lake in China, which is located in the northeast of Qinghai Tibet Plateau. Its unique natural ecological environment and biodiversity are of great significance in the western development and ecological construction. The data is the distribution data of residential areas in the Qinghai Lake Basin, including the distribution of cities, counties, towns and villages in the Qaidam River Basin. The data mainly has two attribute fields: Code (residential area code) and name (residential area name). Collect and sort out the basic, meteorological, topographical and geomorphological data of Qinghai Lake Basin, and provide data support for ecological management of Qinghai Lake Basin.
National Basic Geographic Information Center
The data is the distribution data of the settlements in the Tarim River Basin, mainly including the distribution of cities, counties, towns, and villages in the Tarim River Basin. The data mainly has two attribute fields: Code (settlement code), Name (settlement name)
National Basic Geographic Information Center
The data is the resident site distribution dataset of the north slope of Tianshan River Basin, including the hierarchical distribution of cities, counties, towns and villages at the north slope of Tianshan River Basin. The data mainly has two attribute fields: Code (residential area code) and Name (residential area name).
National Basic Geographic Information Center
The data is the distribution data of residential areas in the chaidamu river basin, including the distribution of cities, counties, towns and villages in the chaidamu river basin. The data mainly has two attribute fields: Code (residential area Code) and Name (residential area Name).
National Basic Geographic Information Center
This data mainly includes the distribution of city, county, township and village level residential areas in the Heihe River Basin, and the data base year is 2009. The data is based on the existing data of residential areas in Heihe River Basin, the latest Google electronic map and the atlas of Gansu Province. There are two main attributes of the data, i.e. residential area classification and total name. The residential area classification is classified according to level 1 - City, level 2 - County, level 3 - Township and level 4 - village.
National Basic Geographic Information Center
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS
0931-4967287
poles@itpcas.ac.cn
Links
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved
｜ 
No.11010502040845
Tech Support: westdc.cn
