Knowledge the elemental composition of aerosols in remote areas is very important for assessing the impact of human activities. This dataset reports the elemental composition of atmospheric aerosols (TSP) in Ranwu, a remote area in the southeast of the Tibet Plateau, from November 2019 to December 2020. The data include acid soluble and total soluble components. The results of acid soluble components are determined by adding 1% sample volume of nitric acid to react for seven days; The treatment of the total soluble component is to use the mixture of nitric acid and hydrofluoric acid for determination after pressurized digestion. The Chinese loess reference material (GBW07408) is used for quality control. In general, the element concentrations in this area are lower than those in other stations in the southeast of the Qinghai Tibet Plateau, but slightly higher than those in the interior of the plateau (Nam co). The interior of the Tibet Plateau is the main source of elements from the crust, and the typical heavy metal elements are the long-distance transport of pollutants emitted by human activities in South Asia and Southeast Asia. The data supplement the database of aerosol elements in the southeast of the Tibet Plateau.
LI Chaoliu
The data set includes carbon isotope data of different regions of the Tibetan Plateau and different environmental (carbon isotope data of black carbon and organic carbon in aerosols from 10 typical stations of the Qinghai Tibet Plateau, carbon isotope data of black carbon and water insoluble organic carbon in 11 snow pits in different years, and carbon isotope data of water-soluble organic carbon in monsoon precipitation from 11 stations of the Qinghai Tibet Plateau and its surrounding areas), All samples were collected at each site, and the content and δ 13C and Δ 14C data, which can be used to accurately assess the contribution proportion of atmospheric carbon aerosols, carbon particles deposited on glaciers and water-soluble organic carbon in precipitation from fossil fuels and biomass fuels.
LI Chaoliu
This data set includes the light absorption data of carbon components in the atmosphere and precipitation at typical stations on the Tibetan Plateau (Ranwu (2018-2021), Namco (2013-2016), Everest (2013-2016), Lulang (2015-2016)). All samples were collected on the spot from various sampling points. The concentrations of black carbon and water-soluble organic carbon, as well as the light absorption data were measured, using the index (MAC value) representing the light absorption capacity, The MAC values of light absorption of water-soluble organic carbon and black carbon are calculated. This data is of great significance for evaluating the radiative forcing of carbon particles in the atmosphere, and is an important basic data input for model simulation.
LI Chaoliu
Carbon particles are an important radiative forcing factor in the atmosphere. Their concentration and composition vary greatly in time and space, especially in remote areas. This data set reports the total suspended particulate matter (TSP), total carbon (TC) and water insoluble particulate carbon (IPC) of PM2.5 at two stations in the remote area of the eastern Qinghai Tibet Plateau (Hongyuan) Δ 14C and δ 13C, the area is affected by severe air pollution from southwest China. The contribution rates of TC fossil fuels in TSP and PM2.5 samples are 18.91 ± 7.22% and 23.13 ± 12.52% respectively, which are far lower than those in Southwest China, indicating the importance of non fossil contributions from local sources. TC in TSP samples at study site δ 13C is 27.06 ± 0.96 ‰, which is between long-distance transport sources (such as the southwest region) and local biomass combustion emissions. This data supplements the database of carbon aerosols in the east of the Tibetan Plateau.
LI Chaoliu
Numerical test: The climate model used is the regional climate model RegCM4.1. RegCM4.1 developed by the Italian Research Center for Theoretical Physics (ICTP). In the test of regional model simulation, the horizontal resolution of the atmospheric model is 50 km and the vertical direction is 18 layers; Online coupling sand dust module. Sea surface temperature The sea surface temperature interpolated by OISST is used. The test includes two groups: the Middle Paleocene topographic test (MP,~60Ma BP, test name 60ma_regcm4.1_xxx. nc) and the Late Oligocene (LO,~25Ma BP, test name 25ma_regcM4.1_xxx. nc) The MP regional terrain modification test removed the northern part of the plateau and approximately replaced the terrain distribution of Asian land during the 60Ma period. BP regional terrain modification test only removed the terrain of Pamirs Plateau, approximately replacing the terrain distribution of Asian land during the 25Ma period. The sand and dust source areas of the two tests have not changed, and the sand and dust circulation process has been opened online. Output time: All tests were integrated for 22 years, using the average results of the last 20 years of each test. The data can be used to explain the difference of drought evolution in different regions around the plateau.
SUN Hui
The ground-based observation dataset of aerosol optical properties over the Tibetan Plateau was obtained by continuous observation with a Cimel 318 sunphotometer, involving two stations: Qomolangma Station and Nam Co Station. These products have taken the process of cloud detection. The data cover the period from January 1, 2021 to December 31, 2021, and the time resolution is daily. The sunphotometer has eight observation channels from visible light to near infrared, and the central wavelengths are 340, 380, 440, 500, 670, 870, 940 and 1120 nm, respectively. The field of view angle of the instrument is 1.2°, and the sun tracking accuracy is 0.1°. Six bands of aerosol optical thickness can be obtained from direct solar radiation, and the accuracy is estimated to be 0.01-0.02. Finally, AERONET unified inversion algorithm was used to obtain the aerosol optical thickness, Ångström index, aerosol particle size distribution, single scattering albedo, phase function, complex refraction index and asymmetry factor.
CONG Zhiyuan
The 0.1 º aerosol optical thickness dataset (also known as the "Poles AOD Collection 1.0" aerosol optical thickness (AOD) dataset) in the polar regions from 2000 to 2020 was produced by combining Merra-2 mode data and MODIS satellite sensor AOD. The data covers the period from 2000 to 2020, with a daily time resolution, covering the "tri polar" (Antarctic, Arctic and Qinghai Tibet Plateau) region, and a spatial resolution of 0.1 degree. The verification of the measured stations shows that the relative deviation of the data is within 35%, which can effectively improve the coverage and accuracy of AOD in the polar region.
GUANG Jie GUANG Jie
The data set includes basic temperature, humidity and pressure wind meteorological elements, black carbon concentration, scattering coefficient, particle size spectrum data and chemical composition analysis. Automatic weather station can measure temperature, relative humidity, air pressure, wind direction, wind speed and accumulated precipitation. AE-33 black carbon meter (hereinafter referred to as AE-33) can online measure the concentration of black carbon aerosol in the 370nm, 470nm, 520nm, 590nm, 660nm, 880nm and 950nm bands of TSP (total suspended particulate matter) in the atmosphere, and the mass absorption cross sections used are 18.47, 14.54, 13.14, 11.58, 10.35, 7.77 and 7.19 m2/g respectively. The official observation period is from June 12, 2021 to August 31, 2021, with a time resolution of 1 minute. The table data has been processed subsequently and is hourly data. The Integrated Nephelometer can measure the scattering coefficient of PM2.5 in the atmosphere at 450nm, 550nm and 700nm on line. The official observation period is from June 12, 2021 to August 31, 2021, with a time resolution of 10 seconds. The table data has been processed subsequently and is hourly data. Aerodynamic Particle Size Spectrometer (hereinafter referred to as APS) can measure 0.5-20 in the atmosphere online μ The number concentration particle size distribution spectrum of particles within m (aerodynamic diameter) particle size range has 50 particle size channels. The official observation period is from June 12, 2021 to August 31, 2021, with a time resolution of 5 minutes. The table data has been processed subsequently and is hourly data. The scanning electromobility particle size spectrometer (SMPS) can measure the particle size distribution of 13.6-514 nm (Stokes diameter) in the atmosphere online; TSI 3752 Condensed Nucleus Particle Counter (CPC) is used to measure the number and concentration of particles. The official observation period is from June 29, 2021 to August 31, 2021, with a time resolution of 5 minutes. The table data has been processed subsequently and is hourly data. The domestic medium flow sampler was used to collect the 90mm diameter quartz filter membrane, water soaked quartz filter membrane and Teflon filter membrane of TSP particle size section. The samples can be used for the analysis of chemical components such as elemental carbon, organic carbon, water-soluble ions and metal elements. The sampling period is from June 23, 2021 to August 29, 2021. The sampling starts at 11:00 a.m. and takes 71 hours each time.
TIAN Pengfei, HUANG Jianping, ZHANG Lei, SHI Jinsen
The surface PM2.5 concentration data of Tibet Plateau is named by date (YYYYMMDD). Each NC file contains one day's data, which is composed of PM2.5 concentration, longitude, latitude, and time information of the area (the corresponding variables in the data are named with PM2.5, lon, lat, time). The data inversion relies on the reanalysis data MERRA-2 released by NASA and the AOD product of Multi-angle Imaging SpectroRadiometer (MISR). MERRA-2 is mainly based on NASA GMAO Earth system model version 5 (GEOS 5). The algorithm is able to assimilate all the in-situ and re- motely-sensed atmospheric data. This dataset mainly focuses on the aerosol field of MERRA-2. This is the first multi-decadal reanalysis within which meteorological and aerosol observations are jointly assimilated into a global assimilation system. MISR views Earth with cameras pointed in 9 different directions， which can help us know the amount of sunlight that is scattered in different directions under natural conditions. The main data products used in this data algorithm are MERRA-2 aerosol analysis product (M2T1NXAER) and MISR Level 3 version 4 global aerosol products (MIL3DAEN_4). Firstly, the ratio of PM2.5 to AOD in each grid was calculated by using the aerosol information provided by MERRA-2. Second, the PM2.5 concentration of the grid was calculated by multiplying the AOD of MISR by the ratio. The mean prediction error of PM2.5 concentration obtained by this method is within 20 μg/m3. The corresponding PM2.5 products can be used for the assessment of particulate pollution in the Tibet Plateau.
FU Disong
The data set includes the data of total suspended particulates (TSP) of atmospheric aerosols, ambient air temperature and humidity, and aerosol samples taken offline in Namco, Tibet. The online observation instruments are Multi Angle Absorption Photometer (MAAP) and Integrating Nephelometer. The observation time is from August 5, 2020 to September 11, 2020. The data time resolution of the online instrument is 10 seconds. The abnormal data generated during the operation of the instrument has been eliminated. The offline sampling was 47 hours of TSP samples. This data set provides basic data for studying the physical characteristics, temporal and spatial variation characteristics and source analysis of atmospheric dust aerosol in the central plateau. Supported project: Special Topic II of the sixth research task of the second comprehensive scientific expedition to the Qinghai Tibet Plateau (2019QZKK0602).
HUANG Jianping, ZHANG Lei, TIAN Pengfei, SHI Jinsen
Aerosol Optical Depth (AOD) reflects the attenuation of solar radiation to the surface by aerosols. The aerosol type is calculated according to the aerosol optical thickness (AOD). This data set is derived from the latest MODIS aerosol secondary product MOD04_ L2 and MYD04_ L2, where MOD and MYD represent Terra and Aqua satellites respectively. At present, MODIS aerosol retrieval algorithms are Dark Target (DT) and Deep Blue (DB). According to the inversion accuracy of the metadata field table Quality Assurance Confidence (QAC), DT and DB algorithm products are integrated to deal with land, ocean and coast respectively. The index quality is optimal (QAF=3) or suboptimal (QAF=2) or meets the basic needs (QAF=1) to obtain high-resolution AOD products (0.1 degree, daily scale) with full coverage and long time series. According to AOD experience threshold (AOD: 0~0.2, clean type; 0.2~0.6, urban or industrial type; greater than 0.6, sand dust type) The aerosol types are classified into three types: clean type (1), urban or industrial type (2) and sand dust type (3). This dataset provides MOD, MYD and fusion products based on transit time.
YE Aizhong
Aerosol Optical Depth (AOD) reflects the attenuation of solar radiation to the surface by aerosols. This data set is derived from the latest MODIS aerosol secondary product MOD04_ L2 and MYD04_ L2, where MOD and MYD represent Terra and Aqua satellites respectively. At present, MODIS aerosol retrieval algorithms are Dark Target (DT) and Deep Blue (DB). According to the inversion accuracy of the metadata field table Quality Assurance Confidence (QAC), DT and DB algorithm products are integrated to deal with land, ocean and coast respectively. The index quality is optimal (QAF=3) or suboptimal (QAF=2) or meets the basic needs (QAF=1) to obtain high-resolution AOD products (0.1 degree, daily scale) with full coverage and long time series. This dataset provides MOD, MYD and fusion products based on transit time.
YE Aizhong
This data-set contains the field measurements of meteorological parameters，trace gases, PM2. 5/PM10, particle number size distribution (12-530 nm), aerosol chemical composition (sulfate and nitrate in PM2.5) at Lulang and Xihai (29.8oN, 94.7oE, 3300 m a.s.l. and 36.9oN, 100.9oE, 3080 m a.s.l., respectively) in southeastern and northeastern part of Tibetan Plateau. The time period of this data-set is from April to May of 2021 and June of 2021. The data-set comes from two measurement campaigns in 2021. The mobile observation platform of Nanjing University, including various online measurement instruments, was used to conduct the field measurements. The data in this data-set is finalized data with the data correction according to the instruments calibration and data quality control based on the data closure research results between multiple instruments. The atmospheric components data, such as trace gases, PM2.5/PM10, particle number size distribution, aerosol chemical composition, are the observation data under actual atmospheric pressure conditions without pressure corrections. The data-set can be directly used to analyze the atmospheric physics and chemistry related scientific issues in the southeastern and northeastern part of the Tibetan Plateau. This data-set supplements the lack of field observation data related to the atmospheric environment in the northeastern part of the Tibetan Plateau.
NIE Wei, CHI Xuguang
As the "water tower" in Asia, the Qinghai Tibet Plateau provides water resources for major rivers in Asia. BC aerosol emitted from biomass and fossil fuel combustion has a strong absorption effect on radiation, which has an important impact on the energy budget and distribution of the earth system. It is an important factor of climate and environmental change. Black carbon aerosols emitted from the surrounding areas of the Qinghai Tibet Plateau can be transported to the interior of the plateau through the atmospheric circulation and settle on the snow and ice surface, which has an important impact on precipitation and glacier material balance. Black carbon meters are set up at five stations on the Qinghai Tibet Plateau, and aethalometer is used to measure the content of Atmospheric Black Carbon online. The data time resolution is day by day, which provides a data basis for assessing the impact of black carbon on the climate and environment of the Qinghai Tibet Plateau and the cross-border transmission of air pollutants. This data is an update of the previously released observation data of five stations of atmospheric black carbon content on the Qinghai Tibet Plateau (2018) and the observation data of five stations of atmospheric black carbon content on the Qinghai Tibet Plateau (2019). The information of the five sites is as follows: Namuco: 30 ° 46'N, 90 ° 59'e, 4730 m a.s.l Everest station: 28.21 ° n, 86.56 ° e, 4276 m a.s.l Southeastern Tibet: 29 ° 46'N, 94 ° 44'e, 3230 m a.s.l Ali station: 33.39 ° n, 79.70 ° e, 4270 m a.s.l Mustard: 38 ° 24'n, 75 ° 02'e, 3650 m a.s.l
The data set contains atmospheric aerosol PM10, PM2.5 and PM1 data and ambient air temperature and humidity from meduo National Climate Observatory (29 ° 18'n, 95 ° 19'e, 1305.0m above sea level) in meduo region, Tibet. The observation instrument is grimm-180 environmental particle analyzer. The observation time is from April 8, 2021 to May 22, 2021. The data time resolution is 10 seconds. The abnormal data generated during the operation of the instrument has been eliminated. During the observation period, due to the influence of the South Asian monsoon, the air humidity is high, and the surrounding of the observation site is less disturbed by human activities. This data set provides basic data for studying the physical characteristics, temporal and spatial variation characteristics and source analysis of atmospheric dust aerosols in Southeast Tibet. Supported project: Topic 2 of the sixth research task of the second comprehensive scientific investigation of the Qinghai Tibet Plateau (2019qzkk0602).
HUANG Jianping, ZHANG Lei, TIAN Pengfei, SHI Jinsen
The data set contains the scattering coefficient data of atmospheric aerosols at 450nm, 550nm and 700nm bands from meduo National Climate Observatory (29 ° 18'n, 95 ° 19'e, 1305.0m above sea level) in meduo region, Tibet. The observation instrument is an integral turbidimeter. The observation time is from April 8, 2021 to May 22, 2021. The time resolution of the data is 10 seconds. The abnormal data generated during the operation of the instrument has been eliminated. During the observation period, due to the influence of the South Asian monsoon, the air humidity is high, and the surrounding of the observation site is less disturbed by human activities. This data set provides basic data for studying the physical characteristics, temporal and spatial variation characteristics and source analysis of atmospheric dust aerosols in Southeast Tibet. Supported project: Topic 2 of the sixth research task of the second comprehensive scientific investigation of the Qinghai Tibet Plateau (2019qzkk0602).
HUANG Jianping, ZHANG Lei, TIAN Pengfei, SHI Jinsen
The data set contains hourly data of atmospheric black carbon aerosol concentrations at the meduo National Climate Observatory (29 ° 18'n, 95 ° 19'e, altitude 1305.0m) in meduo, Tibet. The observation instrument is ae31, and the observation time is from April 9, 2021 to May 20, 2021. The abnormal data generated in the sampling process has been eliminated. During the observation period, due to the influence of the South Asian monsoon, the air humidity is high, and the surrounding of the observation site is less disturbed by human activities. This data set provides basic data for studying the physical characteristics, temporal and spatial variation characteristics and source analysis of atmospheric black carbon aerosols in Southeast Tibet.
HUANG Jianping, ZHANG Lei, TIAN Pengfei, SHI Jinsen
The Qinghai Tibet Plateau is surrounded by regions with high global carbon aerosol emissions, and the surrounding black carbon and brown carbon can be transmitted to the plateau. Light absorbing black carbon and brown carbon have warming effect, and their settlement on the surface of ice and snow will also accelerate the melting of glaciers and snow. At present, there is little research on brown carbon in this area, and the research on the correlation between brown carbon components and optics is in its infancy. Therefore, the study of Atmospheric Black Carbon and brown carbon in the Qinghai Tibet Plateau has important climate and environmental significance. The aerosol optical absorption characteristics of Atmospheric Black Carbon and brown carbon were obtained by observing in different regions of the Qinghai Tibet Plateau. It reveals the spatial differences of optical absorption of black carbon, primary Brown carbon and secondary Brown carbon aerosols in different regions of the Qinghai Tibet Plateau.
ZHU Chongshu
Due to the unique lifestyle of residents and single fuel source, the main fuel in the pastoral area of Qinghai Tibet Plateau is dried yak dung. Yak dung is collected in piles or moulded into dung cake, which is stored after air drying. When used for cooking and heating in residences, it is always burned in cast iron stove. The carbonaceous particles released by yak dung burning are almost the only black carbon aerosol emission source in the vast pastoral area besides motor vehicles. This data set was established by measuring the morphology, particle size and element composition of single particles emitted from yak dung combustion in typical pastoral areas of the Qinghai Tibet Plateau. The sampling sites included Dangxiong County in Naqu and Dazi County in Lhasa. The field sampling location were the chimney outlet of residential homes. The particles were collected on the polycarbonate filter membrane and analyzed in the laboratory by means of computer-controlled scanning electron microscope and X-ray energy spectrometer. The environmental single particles emitted from yak dung combustion in pastoral areas include soot aggregates, tar balls, heavy metals containing carbonaceous particles, mineral dust, and soluble salt particles. This data set includes the numer percentages, particle size and their shape factor (aspect ratio, roundness and form factor) of various types of particles with statistical significance, It is not only an effective supplement to the basic data of human activities affecting the atmospheric environment, but also has potential significance for evaluating their optical characteristics, radiation effects, health effects and environmental impact of local source carbonaceous aerosols on the plateau.
HU Tafeng, WU Feng, ZHU Chongshu, DAI Wenting, WANG Qiyuan, ZHANG Ningning
The data set is from Gaomeigu area in Lijiang, Yunnan Province. The longitude, latitude and altitude of Gaomeigu area are 100 E ° 01 ′ 51 ″, 26 n ° 42 ′ 32 ″, altitude 3200m. The data set includes: 1. Continuous observation of the mass concentration of fusible chemical components in the atmosphere, including organic matter, nitrate, sulfate, chloride and ammonia. The measurement instrument is the aerosol chemical composition on-line monitor (ACSM). The observation period is from 00:29 on March 13, 2018 to 01:27 on April 7, 2018, and the time resolution is 30 minutes. The intermediate instrument runs well, and the data is missing occasionally. The data file contains the mass concentration data of each component measured by the instrument. 2. Continuously observe the mass concentration of black carbon in the atmosphere. The measuring instrument is aethalometer ae33 black carbon instrument produced by Magee company. The observation period is from 00:00 on March 14, 2018 to 23:59 on May 13, 2018, and the time resolution is 1 minute. The whole observation instrument works well, and the data is missing occasionally. The data file contains the information of the instrument, the measured mass concentration data of black carbon and various parameters of the instrument, including temperature, pressure, flow rate, etc. 3. Continuously observe the mass concentration of nitric oxide and nitrogen oxides in the atmosphere. The measuring instrument is the NOx analyzer produced by Thermo Fisher company. The observation period is from 00:00 on April 10, 2018 to 23:59 on May 13, 2018, and the time resolution is 1 minute. The whole observation instrument works well, and the data is missing occasionally. The data file contains the mass concentration data of NOx and no gas measured by the instrument. 4. Continuously observe the mass concentration of ozone in the atmosphere. The measuring instrument is the 49i ozone analyzer produced by Thermo Fisher company. The observation period is from 00:00 on March 15, 2018 to 23:59 on May 13, 2018, and the time resolution is 1 minute. The whole observation instrument works well, and the data is missing occasionally. The data file contains the mass concentration data of ozone gas measured by the instrument. 5. Continuously observe the mass concentration of sulfur dioxide in the atmosphere. The measuring instrument is sulfur dioxide analyzer produced by Thermo Fisher company. The observation period is from 00:00 on March 15, 2018 to 23:59 on May 13, 2018, and the time resolution is 1 minute. The whole observation instrument works well, and the data is missing occasionally. The data file contains the mass concentration data of sulfur dioxide gas measured by the instrument. Supported project: the second comprehensive scientific expedition to the Qinghai Tibet Plateau 2019qzk0602.
WANG Qiyuan, ZHANG Ningning, ZHU Chongshu, HU Tafeng, WU Feng, DAI Wenting, RAN Weikang
The surface PM2.5 concentration data of Tibet Plateau is named by date (YYYYMMDD). Each NC file contains one day's data, which is composed of PM2.5 concentration, longitude, latitude, and time information of the area (the corresponding variables in the data are named with PM2.5, lon, lat, time). The data inversion relies on the reanalysis data MERRA-2 released by NASA and the AOD product of Multi-angle Imaging SpectroRadiometer (MISR). MERRA-2 is mainly based on NASA GMAO Earth system model version 5 (GEOS 5). The algorithm is able to assimilate all the in-situ and re- motely-sensed atmospheric data. This dataset mainly focuses on the aerosol field of MERRA-2. This is the first multi-decadal reanalysis within which meteorological and aerosol observations are jointly assimilated into a global assimilation system. MISR views Earth with cameras pointed in 9 different directions， which can help us know the amount of sunlight that is scattered in different directions under natural conditions. The main data products used in this data algorithm are MERRA-2 aerosol analysis product (M2T1NXAER) and MISR Level 3 version 4 global aerosol products (MIL3DAEN_4). Firstly, the ratio of PM2.5 to AOD in each grid was calculated by using the aerosol information provided by MERRA-2. Second, the PM2.5 concentration of the grid was calculated by multiplying the AOD of MISR by the ratio. The mean prediction error of PM2.5 concentration obtained by this method is within 20 μg/m3. The corresponding PM2.5 products can be used for the assessment of particulate pollution in the Tibet Plateau.
FU Disong
This data-set contains the field measurements of meteorological parameters，trace gases, PM2. 5/PM10, particle number size distribution (12-530 nm), aerosol chemical composition (sulfate, nitrate and heavy metal components in PM2.5) at Geermu and Xihai (36.4oN, 94.8oE, 2800 m a.s.l. and 36.9oN, 100.9oE, 3080 m a.s.l., respectively) and the mobile measurements of trace gases in northeastern part of Tibetan Plateau. The time period of this data-set is from September to October in 2019 and 2020. The data-set comes from two measurement campaigns in 2019 and 2020. The mobile observation platform of Nanjing University, including various online measurement instruments（Duvas-DV3000，microAeth®-MA200，Vaisala weather probe）, was used to conduct the field measurements. The data in this data-set is finalized data with the data correction according to the instruments calibration and data quality control based on the data closure research results between multiple instruments. The atmospheric components data, such as trace gases, PM2.5/PM10, particle number size distribution, aerosol chemical composition, are the observation data under actual atmospheric pressure conditions without pressure corrections. The data-set can be directly used to analyze the atmospheric physics and chemistry related scientific issues in the northeastern part of the Tibetan Plateau. This data-set supplements the lack of field observation data related to the atmospheric environment in the northeastern part of the Tibetan Plateau.
NIE Wei, CHI Xuguang
The data of aerosol optical depth were daily collected at Qomolangma Station for Atmospheric and Environmental Observation and Research with An automatic sun/sky scanning radiometer (Cimel 318), over the period from Jan. to Dec. The data were measured at 2020. 340, 380, 440, 500, 675, 870 and 1020 nm channel with uncertainty of 0.01 - 0.02.
CONG Zhiyuan
(1) Daily average of atmospheric black carbon concentration(ng/m3) at the NASDE. (2) Instruments: Aethalometer (AE33). This instrument collected data with a resolution of one minute. The abnormal data collected at the start-up or faulty stage were manually excluded before analysis further. We generated daily average based on the National Ambient Air Quality Standard of China (GB 3095-2012). (3) From May to November, 2018, a wildlife Conservation Station nearby was constructed, which frequentlyexposed largeamounts of particles, thus the BC concentration was far beyond that collected in the same season of other years. The data in this period shouldbeusedwith greatcaution. Due to problems in the instrument or electric power supply, thedata was lost in other periods. (4) The instrument was placed at the Ngari Station for Desert Environment Observation and Research (79.70° E, 33.39°N, 4270 m above sea level).
XU Baiqing, ZHAO Huabiao, YANG Song
1) The optical depth, vertical mass concentration and extinction coefficient of dust, sulfate, organic carbon, black carbon and sea salt aerosols and total aerosols were measured; 2) Data source: numerical simulation, processing method: Based on CALIPSO satellite vertical observation and global aerosol model, it is generated by four-dimensional local ensemble transformation Kalman filter assimilation method; 3) The data quality is good; 4) It can also be used to study the spatiotemporal distribution of aerosols and their spatial and temporal characteristics of precipitation and their assimilation.
DAI Tie, CHENG Yueming
The data set contains the mass concentration of PM2.5 (particulate matter less than 2.5 μ m) in the atmosphere of Shiquanhe national reference climate station (32 ° 30'n, 80 ° 05'e, altitude 4278.6 m). The measuring instrument is RP 1400A vibrating balance micro balance (TEOM). The observation period is from July 8, 2019 to August 2, 2019, and the time resolution is 1 minute. The data is stored in TXT format.
HUANG Jianping, ZHANG Lei, TIAN Pengfei, SHI Jinsen
The data set is the observation data of Shiquanhe town in Ali area. The longitude, latitude and altitude of the station in Ali area are 32.50 and 80.10 respectively; 4360m。 Continuously observe the mass concentration of black carbon in the atmosphere. The measuring instrument is ae31 (aethalometer), and its observation period is from 12:00:00 on July 13, 2019 to 21:35:00 on July 17, 2020. The time resolution is 5 minutes. There is data loss due to instrument failure. The data file includes instrument information, flow parameter setting (LPM) and specific observed concentration. Supported project: the second comprehensive scientific investigation and Research on the Qinghai Tibet Plateau 2019QZKK0602.
ZHU Chongshu, HU Tafeng, WU Feng, WANG Qiyuan, ZHANG Ningning, DAI Wenting
The data set contains the scattering and absorption coefficients of PM2.5 (particles with particle size less than 2.5 μ m) in the atmosphere of Shiquanhe national reference climate station (32 ° 30'n, 80 ° 05'e, altitude 4278.6 m) in Ali Region. The measurement instrument is photoacoustic extinctiomer (pax), the observation period is from July 13, 2019 to August 2, 2019, and the time resolution is 1 minute. The data set can be used to study the scattering and absorption characteristics of PM2.5 over the Tibetan Plateau.
HUANG Jianping, ZHANG Lei, TIAN Pengfei, SHI Jinsen
The data set contains the scattering coefficients of PM2.5 (particles less than 2.5 μ m) at 450nm, 550nm and 700nm at Shiquanhe national climate station (32 ° 30'n, 80 ° 05'e, altitude 4278.6 m). The measuring instrument is tsi-3563 integral turbidimeter, the observation period is from July 8, 2019 to August 2, 2019, and the time resolution is 10 seconds. It can be used to study the dependence of PM2.5 scattering coefficient on the wavelength of incident light, which can reflect the particle size distribution of PM2.5.
HUANG Jianping, ZHANG Lei, TIAN Pengfei, SHI Jinsen
The data set contains the off-line sampling data of medium flow aerosols from Shiquanhe national climate station (32 ° 30'n, 80 ° 05'e, altitude 4278.6 m) in Ali Region. The measuring instrument is Laoying 2030 medium flow sampler. The quartz filter membrane samples of PM2.5, PM10 and TSP with a diameter of 90 mm are collected. The samples will be used for chemical components such as elemental carbon, organic carbon, water-soluble ions and metal elements analysis. The sampling period is from July 7, 2019 to August 2, 2019, starting at 09:00 every day, with a total of 81 samples for 23 hours each time. The data is stored in Excel file.
HUANG Jianping, ZHANG Lei, TIAN Pengfei, SHI Jinsen
The data set contains the number concentration and size distribution spectrum of particles in the atmosphere of Shiquanhe national climate station (32 ° 30'n, 80 ° 05'e, elevation 4278.6 m) in Ali Region. The instrument is tsi-3321 aerodynamic particle size spectrometer (APS), with 52 particle size channels. The observation period is from July 7, 2019 to August 2, 2019, and the time resolution is 5 minutes. The size distribution spectra of aerosol volume concentration and mass concentration can be obtained by using the data, aerosol spherical hypothesis and aerosol density, and then the characteristics of aerosol particle size distribution in the northwest of Qinghai Tibet Plateau can be studied.
HUANG Jianping, ZHANG Lei, TIAN Pengfei, SHI Jinsen
There are two types of aerosol data in the Tibetan Plateau. Aerosol type data products are the results of aerosol type data fusion by using Meera 2 assimilation data and active satellite CALIPSO products through a series of data preprocessing, quality control, statistical analysis and comparative analysis. The key of the algorithm is to judge the CALIPSO aerosol type. According to CALIPSO aerosol types and quality control, and referring to merra 2 aerosol types, the final aerosol type data (12 kinds) and quality control results were obtained. Considering the vertical and spatial distribution of aerosols, it has high spatial resolution (0.625 ° × 0.5 °) and temporal resolution (month). Aerosol optical depth (AOD) is a visible band remote sensing inversion method developed by ourselves, combined with merra-2 model data and NASA's official product mod04. The data coverage time is from 2000 to 2019, with daily temporal resolution and spatial resolution of 0.1 degree. The retrieval method mainly uses the self-developed APRs algorithm to retrieve the aerosol optical depth over the ice and snow. The algorithm takes into account the BRDF characteristics of the ice and snow surface, and is suitable for the inversion of aerosol optical thickness on the ice and snow. The results show that the relative deviation of the data is less than 35%, which can effectively improve the coverage and accuracy of the polar AOD.
GUANG Jie, ZHAO Chuanfeng
As the "water tower" of Asia, the Qinghai Tibet Plateau provides water resources for the main rivers in Asia. BC aerosol emitted from biomass and fossil fuel combustion has a strong absorption effect on radiation, and has an important impact on the energy budget and distribution of the earth system. It is an important influence factor of climate and environmental change. The black carbon aerosols emitted from the surrounding areas of the Qinghai Tibet Plateau can be transported to the interior of the plateau through the atmospheric circulation, and settle on the surface of snow and ice, which has an important impact on precipitation and glacier mass balance. Black carbon meters were set up at five stations on the Qinghai Tibet Plateau, and aethalometer was used to measure the black carbon content in the atmosphere online. The time resolution of the data was day by day. This data is an update of the previously released "observational data of black carbon content in the atmosphere of the Qinghai Tibet Plateau (2018)". The information of the five sites is as follows: Namco: 30 ° 46'N, 90 ° 59'e, 4730 ma.s.l Mt. Everest: 28.21 ° n, 86.56 ° e, 4276 ma. S.l Southeast Tibet: 29 ° 46'N, 94 ° 44'e, 3230 ma.s.l Ali station: 33.39 ° n, 79.70 ° e, 4270 ma. S.l Mostag: 38 ° 24'n, 75 ° 02'e, 3650 ma.s.l
This data set includes PM2.5 mass concentrations (unit: μ g / m3) of atmospheric aerosol particles from South-East Tibetan plateau Station, Ngari Station, Muztagh Ata Station, Qomolangma station and Namco station. Aerosol PM2.5 fine particles refer to the particles with aerodynamic equivalent diameter less than or equal to 2.5 μ m in ambient air. It can be suspended in the air for a long time, which has an important impact on air quality and visibility. The higher its concentration in the air, the more serious the air pollution. The concentration characteristic data of PM2.5 were calculated every 5 The analysis of aerosol mass concentration in different time scales, such as hour, day and night, season and inter annual, can be achieved by obtaining a group of data frequency for output. This provides important data support for the analysis of aerosol mass concentration changes in different time scales and its influencing factors in different locations of the Qinghai Tibet Plateau, as well as the evaluation of local air quality. The data is an update of the published data set of aerosol PM2.5 concentration at different stations on the Qinghai Tibet Plateau (2018).
WU Guangjian
This dataset includes the monthly AOD datasets from MODIS Aqua of the central and western part of China. By applying the Deep Blue (DB) and Dark Target (DT) algorithms over land, and the DT over-water algorithm, three types of AOD products at 550 nm are relseaed (e.g. Dark Target, Deep Blue and Merged AOD). In this project, monthly AOD products from July 2003 to November 2018 are collected, which can provide the informations of AOD and air pollutions over the central and western part of China.
XIA Xiangao, SONG Zijue
Black carbon is an important light absorbing substance, which has an important impact on climate change. This data set contains the data of black carbon concentration and sedimentation flux in the core of six lakes (gun Yong lake, Tanggula lake, linggecuo, Ranwu lake, gokyo, gosainkunda) on the Qinghai Tibet Plateau and the south slope of the Himalayas. The carbon concentration of Huxin black was determined by digestion filtration thermoluminescence method. This dataset is an excel file, which can be opened directly by using Excel. This data set is helpful to study the history of atmospheric black carbon deposition in the Qinghai Tibet Plateau and its surrounding areas and to further analyze the sources of atmospheric black carbon. It can be used as the basic data for the study of atmospheric black carbon transport and climate effect assessment.
KANG Shichang
This dataset includes the concentrations and spatial pattern of organic carbon (OC) and Elemental carbon (EC) in the carbonaceous aerosol (CA) of the Tibetan Plateau and surroundings. OC and EC were measured by Desert Research Institute Model 2001 Thermal/Optical Carbon Analyzer. The limit of detection (LOD) for OC and EC were 0.43 and 0.12 ug/cm2, respectively. In addition, MAC was also calculated for assessing the effect of EC. This dataset will provide the informations of CA contamination and background values over the Tibetan Plateau and surroundings.
The three pole aerosol type data product is an aerosol type result obtained by integrating the data assimilation of Meera 2 and the active satellite CALIPSO product through a series of data preprocessing, quality control, statistical analysis and comparative analysis. The key of this algorithm is to judge the type of CALIPSO aerosol. In the process of aerosol type data fusion, according to the type and quality control of CALIPSO aerosol, and referring to the type of merra 2 aerosol, the final aerosol type data (12 kinds in total) and quality control results in the three pole area are obtained. The data product fully considers the vertical distribution and spatial distribution of aerosols, with high spatial resolution (0.625 ° × 0.5 °) and time resolution (month).
ZHAO Chuanfeng
The "poles AOD Collection 1.0" aerosol optical thickness (AOD) data set adopts the self-developed visible band remote sensing inversion method, combined with the merra-2 model data and the official NASA product mod04. The data covers from 2000 to 2019, with the time resolution of day by day, covering the "three poles" (Antarctic, Arctic and Qinghai Tibet Plateau) area, and the spatial resolution of 0.1. Degree. The inversion method mainly uses the self-developed APRs algorithm to invert the aerosol optical thickness over ice and snow. The algorithm considers the BRDF characteristics of ice and snow surface, and is suitable for the inversion of aerosol optical thickness over ice and snow. The experimental results show that the relative deviation of the data is less than 35%, which can effectively improve the coverage and accuracy of the aerosol optical thickness in the polar region.
GUANG Jie
The aerosol optical thickness data of Qomolangma station and Namuco station in the Qinghai Tibet Plateau is based on the observation data products of Qomolangma station and Namuco station from the atmospheric radiation view of the Institute of Qinghai Tibet Plateau of the Chinese Academy of Sciences. The data coverage time is from 2017 to 2019, the time resolution is hour by hour, the coverage sites are Qomolangma station and Namuco station, the longitude and latitude coordinates are (Qomolangma station: 28.365n, 86.948e, Namuco station Mucuo station: 30.7725n, 90.9626e). The source of the observed data is retrieved from the radiation data observed by mfrsr instrument. The characteristic variable is aerosol optical thickness, and the error range of the observed inversion is about 15%. The data format is TXT.
CONG Zhiyuan
The total solar radiation and the total radiation of absorption and scattering material attenuation are measured by the international general solar radiation meter (li200sz, li-cor, Inc., USA). The measured data are total solar radiation, including direct and diffuse solar radiation, with a wavelength range of 400-1100nm. The unit of measurement is w / m2, and the typical error is ± 3% (incidence angle is within 60 °) under natural lighting. The data of sodankyl ä station in the Arctic comes from cooperation with the site and website download. The coverage time of sodankyl ä station in the Arctic is updated to 2018.
BAI Jianhui
The aerosol optical thickness data of the Arctic Alaska station is based on the observation data products of the atmospheric radiation observation plan of the U.S. Department of energy at the Arctic Alaska station. The data coverage time is updated from 2016 to 2019, with the time resolution of hour by hour. The coverage site is the northern Alaska station, with the longitude and latitude coordinates of (71 ° 19 ′ 22.8 ″ n, 156 ° 36 ′ 32.4 ″ w). The source of the observed data is retrieved from the radiation data observed by mfrsr instrument. The characteristic variable is aerosol optical thickness, and the error range of the observed inversion is about 15%. The data format is NC format.
ZHAO Chuanfeng
As the “water tower of Asia”, Tibetan Plateau (TP) are the resource of major rivers in Asia. Black carbon (BC) aerosol emitted from surrounding regions can be transported to the inner TP by atmospheric circulation and consequently deposited in snow, which can significantly influence precipitation and mass balance of glaciers. Five Aethalometers are used to mornitoring black carbon concentration at 5 stations on the Tibetan Plateau. It can provide basic dataset to study the effects of BC to the environment and climate over the Tibetan Plateau, as well as the pollutants transport.
This data set includes the mass concentration of atmospheric particles with the aerodynamic diameter less than 2.5 micron meters (PM2.5, unit: μg/m3), and the meteorological data such as temperature (Celsius degree), humidity (%) air pressure (hPa). PM2.5 aerosol particles can be floated in the atmosphere for a long time and can be transported to long range. It has important impact on the air quality and visibility, and is a essential index of air quality. The higher its concentration is, the more serious the air pollution. The PM2.5 data is produced at the interval of 5 min, which enable the key data for analysis on the spatiotemporal characteristics of atmospheric particles on the Tibetan Plateau on different tiem scale, such as hourly, daily, monthly and yearly.
WU Guangjian
Black carbon(BC) is a carbonaceous aerosol that mainly emitted from the incomplete combustion of fossil fuels or biomass. As fine particles in the atmosphere with light-absorbing characteristic, BC can significantly reduce the surface albedo when deposits on snow and ice and accelerate the melting of glaciers and snow cover. New Aethalometer model AE-33 acquires the real-time BC concentration according to the light absorption and attenuation characteristics from the different wavelengths. In addition, AE-33 uses dual-spot measurements, which can compensate for the “spot loading effect” and obtain high-quality BC concentrations. By using the real-time observation data measured by AE-33 at Mt. Everest Station, we analyzed the seasonal and diurnal variations of BC and its sources and transport processes, and we also investigated the transport mechanisms of serious polluted episodes. That can provide basis for future works on assessment of climate effects caused by BC in this region.
KANG Shichang
The data include three data sets of Namcu and Muztagh Ata: an atmospheric aerosol data set of monthly average values of TSP, lithium, sodium and other elements; an atmospheric precipitation chemical data set of monthly average values of soluble sodium ions, potassium ions, magnesium ions, calcium ions and other ions; and a data set of chemical compositions of snow ice in the Zhadang Glacier of Namcu Basin of the concentrations of soluble sodium ions, potassium ions, magnesium ions, calcium ions and other ions in snow pits collected in different months. The data can be used in conducting located observations of atmospheric aerosol element content, precipitation chemistry, and glacier snow ice chemical records in the Namco and Muztagh Ata areas. The samples were processed at the Key Laboratory of Tibetan Environment Changes and Land Surface Processes of CAS using ICS2500 and ICS2000 ion-chromatographic analyzers to determine the concentration of soluble anions and cations in the samples. Data collection and processing: 1. The automatic rain gauges were erected in the typical regions of the Tibetan Plateau (the Namco Basin and the Muztagh Ata Peak area) to collect precipitation samples. The precipitation samples were collected using a SYC-2 type rainfall sampler that comprised a collector, rain sensor and gland drive. The sample collector was provided with a rain collection bucket and a dust collection bucket, and the weather condition was sensed by the rain sensor. The rain collection bucket would be opened when it started to rain, and the gland would be pressed onto the dust collection bucket. Meanwhile, the date and the rain start and end times were automatically recorded. When the rain stopped, the gland automatically flipped to the rain collection bucket to complete a rainfall record. The collected samples were placed in 20 mL clean high-density polyethylene plastic bottles and refrigerated in a -20 °C refrigerator. They were frozen during transportation and storage until right before being analyzed, when they would be taken from the refrigerator and thawed at room temperature (20 °C). They were then processed at the Key Laboratory of Tibetan Environment Changes and Land Surface Processes CAS using ICS2500 and ICS2000 ion-chromatographic analyzers to determine the concentration of soluble anions and cations in the precipitation. 2. The atmospheric aerosol sampler installed at Namco Station was 4 m above the ground and included a vacuum pump, which was powered by solar panels and batteries. The air flux was recorded by an automatic flow meter, and the instantaneous flow rate was approximately 16.7 L/min. The air flux took the meteorological parameter conversion of the Namco area as the standard volume. A Teflon filter with a diameter of 47 mm and a pore size of 0.4 & mu; m was used. The sample interval was 7 days, and the total sample flow rate of each sample was approximately 120-150 m³. Each sample was individually placed in a disposable filter cartridge and stored at low temperature in a refrigerator. Before and after sampling, the filter was placed in a constant temperature (20 ± 5 °C) and constant humidity (40 & plusmn; 2%) environment for 48 hours and weighed with a 1/10000 electronic balance (AUW220D, Shimadu); the difference between the weights before and after was the weight of the aerosol sample on the filter. The collected samples were processed at the Key Laboratory of Tibetan Environment Changes and Land Surface Processes CAS by ICP-MS to determine the concentrations of 18 elements. Strict measures were taken during indoor and outdoor operations to prevent possible contamination. 3. A precleaned plastic shovel was used to collect a sample every 5 cm from the lower part of the snow pit (samples were collected every 10 cm in some snow pits). The samples were dissolved at room temperature, placed in 20 mL clean high-density polyethylene plastic bottles and stored in a refrigerator at -20 °C. The samples were frozen during transportation and storage until they were taken out of the refrigerator before the analysis and melted at room temperature. The samples were processed at the Key Laboratory of Tibetan Environment Changes and Land Surface Processes CAS using ICS2500 and ICS2000 ion-chromatographic analyzers to determine the concentrations of soluble anions and cations in the samples. Clean clothing, disposable masks and plastic gloves should be worn during the manual collection of glacier snow ice chemical samples to prevent contamination. The data set was processed by forming a continuous sequence of monthly mean values after the raw data were quality controlled. It meets the accuracy of routine monitoring research on precipitation, aerosol, snow and ice records in China and the world and is satisfactory for comparative study with relevant climate change records.
KANG Shichang
This data set comprises the oxygen isotope and geochemical data of two deep-drilled ice cores drilled in the Puruogangri ice sheet (33°55'N, 89°05'E, altitude: 6070 meters) in the central Tibetan Plateau in 2000. The ice core depths are 118.4 and 214.7 meters, respectively. Source of the data: National Centers for Environmental Information (http://www.ncdc.noaa.gov/data-access/paleoclimatology-data/datasets/ice-core) . The data set contains 6 tables, which are the average values of 1 oxygen isotope per meter of the Puruogangri ice core, the 10-year average data of 1 oxygen isotope of the Puruogangri ice core, the average values of 2 oxygen isotope and the soluble aerosol concentrations per meter of the Puruogangri ice core, the 5-year average data of 2 oxygen isotope and aerosol concentrations of Puruogangri ice core, 10-year average data of 2 oxygen isotope and aerosol concentrations of the Puruogangri ice core, and the 100-year average values of 2 oxygen isotopic and aerosol concentrations of the Puruogangri ice core. The information on the fields is as follows: Table 1: the average values of 1 oxygen isotope per meter of the Puruogangri ice core Field: Field Name [Dimensions (Unit of Measure)] Field 1: Depth [m] Field 2: δ18° [‰] Table 2: the 10-year average data of 1 oxygen isotope of the Puruogangri ice core Field: Field Name [Dimensions (Unit of Measure)] Field 1: Start time [Dimensionless] Field 2: End time [Dimensionless] Field 3: δ18° [‰] Table 3: the average values of 2 oxygen isotope and soluble aerosol concentration per meter of the Puruogangri ice core Field: Field Name [Dimensions (Unit of Measure)] Field 1: Depth [m] Field 2: Dust (diameter 0.63-20 um) [particles/mL] Field 3: 18° [‰] Field 4: F- [ppb] Field 5: Cl- [ppb] Field 6: SO42- [ppb] Field 7: NO3- [ppb] Field 8: Na+ [ppb] Field 9: NH4+ [ppb] Field 10: K+ [ppb] Field 11: Mg2+ [ppb] Field 12: Ca2+ [ppb] Table 4: the 5-year average data of 2 oxygen isotope and aerosol concentration of the Puruogangri ice core Field: Field Name [Dimensions (Unit of Measure)] Field 1: Start time [Dimensionless] Field 2: End time [Dimensionless] Field 3: δ18° [‰] Field 4: Accumulation [cm/yr] Field 5: Dust (diameter 0.63-20 um) [particles/mL] Field 6: F- [ppb] Field 7: Cl- [ppb] Field 8: SO42- [ppb] Field 9: NO3- [ppb] Field 10: Na+ [ppb] Field 11: NH4+ [ppb] Field 12: K+ [ppb] Field 13: Mg2+ [ppb] Field 14: Ca2+ [ppb] Table 5: the 10-year average data of 2 oxygen isotope and aerosol concentrations of the Puruogangri ice core Field: Field Name [Dimensions (Unit of Measure)] Field 1: Start time [Dimensionless] Field 2: End time [Dimensionless] Field 3: δ18° [‰] Field 4: Dust (diameter 0.63-20 um) [particles/mL] Field 5: F- [ppb] Field 6: Cl- [ppb] Field 7: SO42- [ppb] Field 8: NO3- [ppb] Field 9: Na+ [ppb] Field 10: NH4+ [ppb] Field 11: K+ [ppb] Field 12: Mg2+ [ppb] Field 13: Ca2+ [ppb] Table 6: the 100-year average values of 2 oxygen isotopic and aerosol concentrations of the Puruogangri ice core Field: Field Name [Dimensions (Unit of Measure)] Field 1: The last year of the interval [Dimensionless] Field 2: δ18° [‰] Field 3: Dust (diameter 0.63-20 um) [particles/mL] Field 4: F- [ppb] Field 5: Cl- [ppb] Field 6: SO42- [ppb] Field 7: NO3- [ppb] Field 8: Na+ [ppb] Field 9: NH4+ [ppb] Field 10: K+ [ppb] Field 11: Mg2+ [ppb] Field 12: Ca2+ [ppb]
National Centers for Environmental Information (NCEI)
The measurement data of the sun spectrophotometer can be directly used to perform inversion on the optical thickness of the non-water vapor channel, Rayleigh scattering, aerosol optical thickness, and moisture content of the atmospheric air column (using the measurement data at 936 nm of the water vapor channel). The aerosol optical property data set of the Tibetan Plateau by ground-based observations was obtained by adopting the Cimel 318 sun photometer, and both the Mt. Qomolangma and Namco stations were involved. The temporal coverage of the data is from 2009 to 2016, and the temporal resolution is one day. The sun photometer has eight observation channels from visible light to near infrared. The center wavelengths are 340, 380, 440, 500, 670, 870, 940 and 1120 nm. The field angle of the instrument is 1.2°, and the sun tracking accuracy is 0.1°. According to the direct solar radiation, the aerosol optical thickness of 6 bands can be obtained, and the estimated accuracy is 0.01 to 0.02. Finally, the AERONET unified inversion algorithm was used to obtain aerosol optical thickness, Angstrom index, particle size spectrum, single scattering albedo, phase function, birefringence index, asymmetry factor, etc.
CONG Zhiyuan
The aerosol optical thickness data of the Arctic Alaska station is based on the observation data products of the atmospheric radiation observation plan of the U.S. Department of energy at the Arctic Alaska station. The data coverage time is from 1998 to 2016, and the time resolution is hour by hour. The coverage site is the Arctic Alaska station, with the longitude and latitude coordinates of (71 ° 19 ′ 22.8 ″ n, 156 ° 36 ′ 32.4 ″ w). The source of the observed data is retrieved from the radiation data observed by mfrsr instrument. The optical characteristic variable is aerosol optical thickness, and the error range of the observed inversion is about 15%. The data format is NC format.
ZHAO Chuanfeng
The object of this dataset is to support the atmospheric correction data for the satellite and airborne remote-sensing. It provides the atmospheric aerosol and the column content of water vapor. The dataset is sectioned into two parts: the conventional observations data and the observations data synchronized with the airborne experiments. The instrument was on the roof of the 7# in the Wuxing Jiayuan community from 1 to 24 in June. After 25 June, it was moved to the ditch in the south of the Supperstaiton 15. The dataset provide the raw observations data and the retrieval data which contains the atmosphere aerosol optical depth (AOD) of the wavebands at the center of 1640 nm, 1020 nm, 936 nm, 870 nm, 670 nm, 500 nm, 440 nm, 380 nm and 340 nm, respectively, and the water vapor content is retrieved from the band data with a centroid wavelength of 936 nm. The continuous data was obtained from the 1 June to 20 September in 2012 with a one minute temporal resolution. The time used in this dataset is in UTC+8 Time. Instrument: The sun photometer is employed to measure the character of atmosphere. In HiWATER, the CE318-NE was used.
YU Wenping, WANG Zengyan, MA Mingguo
The dataset of sun photometer observations was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas. 24 times observations were carried out by CE318 from BNU (at 1020nm, 936nm, 870nm, 670nm and 440nm, and column water vapor by 936 nm data) and from Institute of Remote Sensing Applications, CAS (at 1640nm, 1020nm, 936nm, 870nm, 670nm, 550nm, 440nm, 380nm and 340nm, and column water vapor by 936 nm data) on May 20, 23, 25 and 27, Jun. 4, 6, 16, 20, 22, 23, 27 and 29, Jul. 1, 7 and 11, 2008. Those atmospheric measurements synchronized with airborne (i.e. WiDAS, OMIS) and spaceborne sensors (i.e. TM, ASTER,CHRIS and Hyperion) Accuracy of CE318 could be influenced by local air pressure, instrument calibration parameters, and convertion factors. (1) Most air pressure was derived from elevation-related empiricism, which was not reliable. For more accurate result, simultaneous data from the weather station are needed. (2) Errors from instrument calibration parameters. Field calibration based on Langly or interior instrument calibrationcin the standard light is required. (3) Convertion factors for retrieval of aerosol optical depth and the water vapor of the water vapor channel were also from empiricism, and need further checking. Raw data were archived in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for details. Preprocessed data (after retrieval of the raw data) in Excel format are on optical depth, Rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. Langley was used for the instrument calibration. Two parts are included in CE318 result data (see Geometric Positions and the Total Optical Depth of Each Channel and Rayleigh Scattering and Aerosol Optical Depth of Each Channel).
REN Huazhong, YAN Guangkuo, GUANG Jie, SU Gaoli, WANG Ying, ZHOU Chunyan
The dataset of sun photometer observations was obtained in Linze grassland station, the reed plot A, the saline plot B, the barley plot E, the observation stationof the Linze grassland foci experimental areaand Jingdu hotel of Zhangye city. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318 from May 30 to Jun. 11, 2008. And from Jun. 15 to Jul.11, the data of 1640nm, 1020nm, 936nm, 870nm, 670nm, 550nm, 440nm, 380nm and 340nm were acquired. Both measurements were carried out at intervals of 1 minute. Optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, air temperature and pressure near land surface, the solar azimuth and zenith could all be further retrieved. Readme file was attached for detail.
LIANG Ji, WANG Xufeng
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jun. 1, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire CCD, MIR and TIR band data. The simultaneous ground data included: (1) The radiative temperature of maize, wheat and the bare land in Yingke oasis maize field and Huazhaizi desert No. 1 plot by ThermaCAM SC2000 (1.2m above the ground, FOV = 24°×18°). The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived in Excel format). (2) The radiative temperature by the automatic thermometer (FOV: 10°; emissivity: 1.0; from Institute of Remote Sensing Applications), observing straight downwards at intervals of 1s in Yingke oasis maize field. Raw data, blackbody calibrated data and processed data were all archived in Excel format. (3) FPAR (Fraction of Photosynthetically Active Radiation) of maize and wheat by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in Excel format. (4) The reflectance spectra by ASD in Yingke oasis maize field (350-2500nm , from BNU, the vertical canopy observation and the transect observation), and Huazhaizi desert No. 1 plot (350-2500nm , from Cold and Arid Regions Environmental and Engineering Research Institute, CAS, the NE-SW diagonal observation at intervals of 30m). The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (5) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (6) The radiative temperature by the handheld radiometer in Yingke oasis maize field (from BNU, the vertical canopy observation, the transect observation and the diagonal observation), Yingke oasis wheat field (only for the transect temperature), and Huazhaizi desert No. 1 plot (the NE-SW diagonal observation). Besides, the maize radiative temperature and the physical temperature were also measured both by the handheld radiometer and the probe thermometer in the maize plot of 30m near the resort. The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (7) Atmospheric parameters on the playroom roof at the resort by CE318 (produced by CIMEL in France). The underlying surface was mainly composed of crops and the forest (1526m high). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (8) Narrow channel emissivity of the bare land and vegetation by the W-shaped determinator in Huazhaizi desert No. 1 plot. Four circumstances should be considered for emissivity, with the lid plus the au-plating board, the au-plating board only, the lid only and without both. Data were archived in Word.
CHEN Ling, HE Tao, REN Huazhong, REN Zhixing, YAN Guangkuo, ZHANG Wuming, XU Zhen, LI Xin, GE Yingchun, SHU Lele, JIANG Xi, HUANG Chunlin, GUANG Jie, LI Li, LIU Sihan, WANG Ying, XIN Xiaozhou, ZHANG Yang, ZHOU Chunyan, LIU Xiaocheng, TAO Xin, CHEN Shaohui, LIANG Wenguang, LI Xiaoyu, CHENG Zhanhui, Liu Liangyun, YANG Tianfu
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on May 30, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire CCD, MIR and TIR band data. The simultaneous ground data included: (1) The radiative temperature by the handheld radiometer (BNU) in Yingke oasis maize field and Huazhaizi desert maize field (the vertical canopy observation and the transect observation for both fields), and Huazhaizi desert No. 2 plot (the diagonal observation). The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (2) The component temperature of maize and wheat by the handheld radiometer in Yingke oasis maize field, Yingke wheat field and Huazhaizi desert maize field. For maize, the component temperature included the vertical canopy temperature, the bare land temperature and the plastic film temperature; for the wheat, it included the vertical canopy temperature, the half height temperature, the lower part temperature and the bare land temperature. The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (3) The radiative temperature of maize, wheat and the bare land in Yingke oasis maize field by ThermaCAM SC2000 (1.2m above the ground, FOV = 24°×18°), The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived in Excel format). (4) The radiative temperature and the canopy multi-angle radiative temperature by the fixed automatic thermometer (FOV: 10°; emissivity: 1.0), observing straight downwards at intervals of 1s in Yingke oasis maize field (2 instruments for maize canopy), Huazhaizi desert maize field (only one for maize canopy) and Huazhaizi desert No. 2 plot (two for reaumuria soongorica canopy and the bare land). The thermal infrared remote sensing calibration was carried out in the resort plot. Raw data, blackbody calibrated data and processed data were all archived in Excel format. (5) Coverage fraction of maize and wheat by the self-made instrument and the camera (2.5m-3.5m above the ground) in Yingke oasis maize field. Based on the length of the measuring tape and the bamboo pole, the size of the photo can be decided. GPS date were also collected and the technology LAB was applied to retrieve the coverage of the green vegetation. Besides, such related information as the surrounding environment was also recorded. Data included the primarily measured image and final fraction of vegetation coverage. (6) Reflectance spectra of Yingke oasis maize field (350-2500nm, from Institute of Remote Sensing Applications) and resort calibration site (350-2500nm, from Beijing Univeristy) by ASD (Analytical Sepctral Devices); BRDF by the self-made observation platform. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (7) Atmospheric parameters at the resort calibration site by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (8) Soil moisture (0-40cm) by the cutting ring, the soil temperature by the thermocouple thermometer, roughness by the self-made roughness board and the camera in Huazhaizi desert No. 1 plot. Sample points were selected every 30m along the diagonals. Data were all archived in Excel format. (9) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (10) FPAR (Fraction of Photosynthetically Active Radiation) by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in Word. LAI in Yingke oasis maize field. The maximum leaf length and width of each maize and wheat were measured. Data were archived in Excel format of May 31.
CHAI Yuan, CHEN Ling, HE Tao, KANG Guoting, QIAN Yonggang, REN Huazhong, REN Zhixing, WANG Haoxing, ZHANG Wuming, ZOU Jie, GE Yingchun, SHU Lele, WANG Jianhua, XU Zhen, GUANG Jie, LIU Sihan, XIN Xiaozhou, ZHANG Yang, ZHOU Chunyan, LIU Xiaocheng, TAO Xin, LIANG Wenguang, WANG Dacheng, LI Xiaoyu, CHENG Zhanhui, YANG Tianfu, HUANG Bo, LI Shihua, LUO Zhen
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jul. 11, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire CCD, MIR and TIR band data. The simultaneous ground data included: (1) Atmospheric parameters in Huazhaizi desert No. 2 plot from CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for details. Processed data (after retrieval of the raw data) in Excel format are on optical depth, Rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (2) Radiative temperature of maize, wheat and the bare land (in Yingke oasis maize field), vegetation and the bare land (Huazhaizi desert No. 2 plot) by the thermal cameras at a height of 1.2m above the ground. Optical photos of the scene were also taken. Raw data (read by ThermaCAM Researcher 2001) was archived in IMG format and radiative files are stored in Excel format. . (3) Photosynthesis by LI6400 in Yingke oasis maize field, carried out according to WATER specifications. Raw data were archived in the user-defined format (by notepat.exe) and processed data were in Excel format. (4) Ground object reflectance spectra in Yingke oasis maize field, Huazhaizi maize field, Huazhaizi desert No. 1 and 2 plots, by ASD FieldSpec (350～2500 nm) from Institute of Remote Sensing Applications (IRSA), CAS. Raw data were binary files direct from ASD (by ViewSpecPro), which were recorded daily in detail, and pre-processed data on reflectance were in .txt format. (5) The radiative temperature in Huazhaizi desert No. 2 plot by the handheld infrared thermometer (BNU and IRSA). Raw data, blackbody calibrated data and processed data (in Excel format) were all archived. (6) FPAR (Fraction of Photosynthetically Active Radiation) by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in Excel format. (7) The radiative temperature of the maize canopy by the automatic thermometer (FOV: 10°; emissivity: 0.95) mearsued at nadir with an time intervals of 1s in Huazhaizi desert maize field. Raw data, blackbody calibrated data and processed data were all archived as Excel files. (8) Maize albedo from two shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format.
REN Huazhong, WANG Tianxing, YAN Guangkuo, LI Li, LI Hua, LIU Sihan, XIA Chuanfu, XIN Xiaozhou, ZHOU Chunyan, ZHOU Mengwei, YANG Guijun, LI Xiaoyu, CHENG Zhanhui, Liu Liangyun
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jun. 29, 2008. WiDAS, composed of four CCD cameras, one mid-infrared thermal imager (AGEMA 550), and one infrared thermal imager (S60), can acquire VNIR, MIR and TIR band data. The simultaneous ground data included: (1) Atmospheric parameters in Huazhaizi desert No. 2 plot from CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (2) Emissivity of maize and wheat in the Yingke oasis by portable 102F (2.0~25.0um) from BNU. Warm blackbody, cold blackbody, the target and the au-plating board of known emissivity. Raw data of those four measurements were archived in *.WBX, *.CBX, *.SAX and *.CBX Besides, the spectral radiance and emissivity calculated by 102F were archived in *.RAX and *.EMX, respectively. Meanwhile, the final spectral emissivity of targets were also calculated by TES (ISSTES). (3) LAI of mazie and wheat in Yingke oasis maize field. The maximum leaf length and width of leaves were measured. Data were archived as Excel files of Jul. 2. (4) FPAR (Fraction of Photosynthetically Active Radiation) of maize and wheat by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in MS Office Word format. (5) the radiative temperature by the automatic thermometer (FOV: 10°; emissivity: 0.95), measured at nadir with time intervals of one second in Yingke oasis maize field (one from BNU and the other from Institute of Remote Sensing Applications), Huazhaizi desert maize field (only one from BNU for continuous radiative temperature of the maize canopy) and Huazhaizi desert No. 2 plot (two for reaumuria soongorica canopy and the background bare soil). Raw data, blackbody calibrated data and processed data were all archived as Excel files. (6) the component temperature in Yingke oasis maize field (by the handheld radiometer and the thermal image from BNU), Yingke oasis wheat field and Huazhaizi desert maize field. For maize, the component temperature included the vertical canopy temperature, the bare land temperature and the plastic film temperature; for the wheat, it included the vertical canopy temperature, the half height temperature, the lower part temperature and the bare land temperature. The data included raw data (in MS Office Word format), recorded data and the blackbody calibrated data (in Excel format). (7) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the observation height). Data were archived in MS Office Excel format. (8) the radiative temperature by the handheld radiometer in Yingke oasis maize field and Huazhaizi desert maize field (the vertical canopy observation and the transect observation for both fields), and Huazhaizi desert No. 2 plot (the NE-SW diagonal observation). The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (9) ground object reflectance spectra in Yingke oasis maize field by ASD FieldSpec (350～2 500 nm) from BNU. The vertical canopy observation and the line-transect observation were used. The data included raw data (from ASD, read by ViewSpecPro), recorded data and processed data on reflectance (in Excel format).
CHEN Ling, GUO Xinping, REN Huazhong, WANG Tianxing, XIAO Yueting, YAN Guangkuo, CHE Tao, GE Yingchun, GAO Shuai, LI Hua, LI Li, LIU Sihan, SU Gaoli, WU Mingquan, XIN Xiaozhou, ZHOU Chunyan, ZHOU Mengwei, FAN Wenjie, SHEN Xinyi, YU Fan, YANG Guijun, Liu Liangyun
The dataset of ground truth measurement synchronizing with the airborne WiDAS mission and Landsat TM was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jul. 7, 2008. Observation items included: (1) the radiative temperature by the thermal camera (Institute of Remote Sensing Applications) of maize, wheat and the bare land of Yingke oasis maize field at a height of 1.2m above the ground. Optical photos of the scene were also taken. Raw data (read by ThermaCAM Researcher 2001) was archived in IMG format, and blackbody calibrated data and processed data were all archived as Excel files. (2) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (3) Reflectance spectra in Yingke oasis maize field by ASD FieldSpec (350-1603nm) from Institute of Remote Sensing Applications (CAS). The grey board and the black and white cloth were also used for calibration on the CCD camera. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (4) the component temperature by the handheld radiometer in Yingke oasis maize field and Huazhaizi desert maize field. For maize, the component temperature included the vertical canopy temperature, the bare land temperature and the plastic film temperature; for the wheat, it included the vertical canopy temperature, the half height temperature, the lower part temperature and the bare land temperature. The data included raw data (in Word format), recorded data and the blackbody calibrated data (in Excel format). (5) the radiative temperature by the handheld radiometer (emissivity = 1.0) in Yingke oasis maize field (for the canopy mean temperature), Huazhaizi desert maize field (for the transect temperature), Zhangye airport (the black and white cloth for calibration) and Huazhaizi desert No. 2 plot (the diagonal radiative temperature and the radiative temperature of 30m*30m subplot). The component temperature was also measured. The data included raw data (in Word format), recorded data and the blackbody calibrated data (as Excel files). (6) The air temperature (°C) , the soy bean leaf temperature (°C) and the maize leaf temperature (°C) by SPAD (from Institute of Remote Sensing Applications (CAS)) in Yingke oasis maize field. Besides, spectrum, photosynthesis, fluorescence and chlorophyll were measured as well. (7) The leaf reflectance spectra ASD (serial number: 64831) and 50% grey board from Institute of Remote Sensing Applications (CAS). The spectral DN was changed into radiance based on the 50% grey board calibration data and calibration lamp data, which could further be transformed into Excel format. Moreover, the solar radiance=the reference board radiance/the reference reflectance. (8) The leaf fluorescence by ImagingPam from Beijing Academy of Agriculture and Forestry Sciences. YII = (Fm'-F)/Fm' was applied for caculation, F indicating fluorescence before saturating flash light, Fm' the maximum fluorescence before saturating flash light, and YII the quantum yield of photosystem II. Data were archived in pim and could be read by ImagingPam, which can be downloaded from http://www.zealquest.com. (9) The leaf photosynthesis by LI-6400. (10) The radiative temperature by the automatic thermometer (FOV: 10°; emissivity: 0.95), observing straight downwards at intervals of 1s in Yingke oasis maize field and Huazhaizi desert maize field. Raw data, blackbody calibrated data and processed data were all archived in Excel format. (11) FPAR (Fraction of Photosynthetically Active Radiation) by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in the table format of Word. (12) Atmospheric parameters near Daman Water Management office by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, Rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number.
CHEN Ling, REN Huazhong, WANG Tianxing, YAN Guangkuo, HAO Xiaohua, WANG Shuguo, LI Li, LI Hua, LIU Sihan, SU Gaoli, XIA Chuanfu, XIN Xiaozhou, ZHOU Chunyan, ZHOU Mengwei, LI Xinhui, YU Fan, ZHU Xiaohua, YANG Guijun, CHENG Zhanhui, Liu Liangyun
The dataset of ground truth measurement synchronizing with PROBA CHRIS was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jun. 22, 2008. Observation items included: (1) Albedo by the shortwave radiometer in Huazhaizi desert No. 2 plot. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (2) BRDF of maize in Yingke oasis maize field by ASD (350-2 500 nm) from Beijing University and the observation platform of BNU make. The maximum height of the platform was 5m above the ground with the azimuth 0~360° and the zenith angle -60°~60°; BRDF in Huazhaizi desert No. 2 plot by ASD from Institute of Remote Sensing Applications (CAS) and the observation platform of its own make, whose maximum height was 2m above the ground with the zenith angle -70°~70°. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (3) Atmospheric parameters in Huazhaizi desert No. 2 plot by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number.
CHEN Ling, GUO Xinping, REN Huazhong, ZOU Jie, LIU Sihan, ZHOU Chunyan, FAN Wenjie, TAO Xin
The dataset of ground truth measurements synchronizing with ASTER was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on May 28, 2008. Observation items included: (1) Atmospheric parameters in Huazhaizi desert No. 2 plot by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (2) Photosynthesis by LI-6400. Raw data were archived in the user-defined format (by notepat.exe) and processed data were in Excel format. (3) Reflectance spectra in Yingke oasis maize field by ASD FieldSpec (350-2500nm, the vertical canopy observation and the transect observation) from Institute of Remote Sensing Applications (CAS), and in Huazhaizi desert No. 2 plot by ASD FieldSpec (350-1603nm, the vertical observation and the transect observation for reaumuria soongorica and the bare land) from Beijing Academy of Agriculture and Forestry Sciences. The grey board and the black and white cloth were also used for calibration spectrum. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (4) Coverage fraction of maize and wheat by the self-made instrument and the camera (2.5m-3.5m above the ground) in Yingke oasis maize field. Based on the length of the measuring tape and the bamboo pole, the size of the photo can be decided. GPS date were also collected and the technology LAB was applied to retrieve the coverage of the green vegetation. Besides, such related information as the surrounding environment was also recorded. Data included the primarily measured image and final fraction of vegetation coverage. (5) the radiative temperature of maize, wheat and the bare land in Yingke oasis maize field by ThermaCAM SC2000 using ThermaCAM SC2000 (1.2m above the ground, FOV = 24°×18°),. The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived in Excel format). (6) the radiative temperature by the automatic thermometer (FOV: 10°; emissivity: 0.95), 3 for maize canopy, the bare land and wheat canopy in Yingke oasis maize field, one for maize canopy in Huazhaizi desert maize field, and 2 for vegetation and the desert bare land in Huazhaizi desert No. 2 plot,at nadir at a time interval of one second. Raw data, blackbody calibrated data and processed data were all archived in Excel format. (7) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (8) LAI in Yingke oasis maize field. The maximum leaf length and width of each maize and wheat were measured. Data were archived in Excel format. (9) FPAR (Fraction of Photosynthetically Active Radiation) of maize and wheat by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in the table format of Word. (10) The radiative temperature in Yingke oasis maize field (the transect observation), Yingke oasis wheat field (the transect observation), Huazhaizi desert maize field (the transect observation) and Huazhaizi desert No. 2 plot (the diagonal observation) by the handheld infrared thermometer (BNU and Institute of Remote Sensing Applications). Raw data (in Word format), blackbody calibrated data and processed data (in Excel format) were all archived.
CHAI Yuan, CHEN Ling, KANG Guoting, QIAN Yonggang, REN Huazhong, WANG Haoxing, WANG Jianhua, SHU Lele, LI Li, LIU Sihan, XIN Xiaozhou, ZHANG Yang, ZHOU Chunyan, ZHOU Mengwei, TAO Xin, WANG Dacheng, LI Xiaoyu, CHENG Zhanhui, YANG Tianfu, HUANG Bo, LI Shihua, LUO Zhen
The dataset of ground truth measurements synchronizing with Landsat TM was obtained in the Biandukou foci experimental area from 11:10-13:30 on Mar. 17, 2008. Those provide reliable ground data for objects modelling and background modelling, remote sensing image simulation and scaling. Simultaneous with the satellite overpass, numerous ground data were collected, spectrum (ASD Fieldspec FRTM (Boulder, Co, USA), 350nm-2500nm, 3nm for the visible near-infrared band and 10nm for the shortwave infrared band), the surface temperature, atmospheric parameters, the soil profile gravimetric moisture (0-1cm, 1-3cm and 3-5cm), the shallow layer frost depth and the soil roughness in C1, G1, W1, W2, B1 and B2, mostly the grassland, the wheat stubble land, the deep plowed land and the rape stubble land. The quadrates of 90m×90m and 450m×450m were compartmentalized into 81 subgrids of 10m×10m and 50m×50m. Based on the resolution of 30m×30m and 150m×150m, the influence of adjacent eight pixels on the center pixel was studied. Section lines of each subgrid were adopted to acquire the pixel spectrum, which were measured more than once for the mean value. The spectrum data were archived in the ASCII format, with the first five rows as the file header and the following two columns as wavelength (nm) and reflectance (percentage) respectively. The .txt file was not reflectance but intermediate file for further calculation. Raw data were binary files direct from ASD (by ViewSpecPro). The surface radiative temperature and the physical temperature were measured by the handheld infrared thermometer. Besides, the cover type was also recorded. The data can be opened by Microsoft Office. Atmospheric parameters were measured by CE318 to retrieve the total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, and various parameters at 550nm to obtain horizontal visibility with the help of MODTRAN or 6S. Those provide reliable data for atmosphere correction of the same period in this area. The gravimetric soil moisture (samples from 0-1cm, 1-3cm and 3-5cm) was measured by the microwave drying method. The frost depth by the chopstick and the ruler. The soil was considered frozen when it was hard and with ice crystal. The data can be opened by Microsoft Office. Nine data files were included, TM data, CE318 data, B1, B2, C1, G1, W1 and W2.
CHANG Sheng, CHANG Yan, Fang Qian, QU Ying, LIANG Xingtao, LIU Zhigang, PAN Jinmei, PENG Danqing, REN Huazhong, ZHANG Yongpan, ZHANG Zhiyu, ZHAO Shaojie, Zhao Tianjie, ZHENG Yue, Zhou Ji, LIU Chenzhou, YIN Xiaojun, ZHANG Zhiyu
The dataset of ground truth measurements synchronizing with EO-1 Hyperion was obtained in the Yingke oasis foci experimental area from Sep. 5 to Sep. 10, 2007 during the pre-observation period. It was carried out by the 3rd and 2nd sub-projects of CAS’s West Action Plan along Zhangye city-Yingke oasis-Huazhaizi, and on the very day of 10, one scene of Hyperion was captured. sampling plot time north latitude east longitude elevation notes 1 9:58 38°53′53.2″ 100°26′09.7″ 1500 cauliflower land east to the road 2 10:51 38°52′39.8″ 100°25′33.1″ 1510 cabbage land east to the road 3 11:35 38°52′39.0″ 100°25′34.6″ 1510 east to No. 2 sampling plot, maize and intercropping wheat reaped 4 12:24 38°51′53.0″ 100°25′08.0″ 1510 maize seed 5 13:08 38°51′54.2″ 100°25′09.5″ 1520 north to No. 4 sampling plot, maize and intercropping wheat reaped 6 14:40 38°51′23.5″ 100°24′45.0″ 1510 west to the road, maize seed, serious blights (red spider) 7 15:40 38°49′26.6″ 100°23′23.7″ 1540 intercrop land of sea buckthorn and beet 8 16:18 38°49′06.9″ 100°23′30.5″ 1540 tomato land, rich of amaranth weeds 9 16:18 38°49′06.4″ 100°23′30.8″ 1540 beet land 10 16:18 38°49′06.9″ 100°23′30.5″ 1540 tomato land with less weeds 11 10:30 38°48′28.3″ 100°24′11.4″ 1540 sea buckthorn seedling land west to the road 12 11:24 38°48′09.3″ 100°24′10.1″ 1550 sun flower land east to the road, intercropping wheat reaped 13 12:38 38°46′16.3″ 100°23′14.2″ 1600 dry rice land 14 12:45 38°46′16.2″ 100°23′14.0″ 1600 rape land 15 12:54 38°46′15.6″ 100°23′13.8″ 1600 buckwheat land 16 14:52 38°45′55.5″ 100°23′00.1″ 1610 maize (without intercrop) 17 15:28 38°45′57.5″ 100°22′28.3″ 1630 maize (without intercrop) 18 16:20 38°43′17.3″ 100°22′53.4″ 1730 gobi (Bassia dasyphylla and margarite dominate) 19 17:40 38°42′31.8″ 100°22′56.8″ 1780 gobi (Bassia dasyphylla and Sympegma regelii dominate) 20 10:27 38°36′25.1″ 100°20′33.2″ 2260 wheatgrass dominates 21 11:10 38°36′24.4″ 100°20′38.1″ 2260 abandoned composite land 22 11:30 2260 near site 22, wheatgrass and composite cenosis 23 bare land 24 13:09 38°38′46.3″ 100°23′08.5″ 2030 alfalfa land 25 14:39 38°44′30.8″ 100°22′41.0″ 1660 poplar 26 9:47 38°58′11.4″ 100°26′18.3″ 1460 rice land Observation items included: (1) quadrat surveys (2) LAI by LAI-2000 (3) ground object reflectance spectra by ASD FieldSpec Pro (350-2500nm)from Gansu Meteorological Administration (4) the land surface temperature and the canopy radiative temperature by the hand-held thermal infrared sensor (5) the photosynthesis rate by LI-6400 (6) the radiative temperature by ThermaCAM SC2000 (7) Atmospheric parameters by CE318 to retrieve the total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, and various parameters at 550nm to obtain horizontal visibility with the help of MODTRAN or 6S codes (8) chlorophyll consistency by portable SPAD Those provide reliable ground data for developing and validating retrieval meathods of biophysical parameters from EO-1 Hyperion images.
MA Mingguo, LI Xin, SU Peixi, DING Songchuang, GAO Song, YAN Qiaodi, ZHANG Lingmei, WANG Xufeng, Qian Jinbo, BAI Yunjie, HAO Xiaohua, Liu Qiang, Wen Jianguang, XIN Xiaozhou, WANG Xiaoping, HAN Hui
The dateset of sun photometer observations was obtained in the Biandukou foci experimental area from Mar. 7 to 17, 2008, simultaneous with MODIS and TM. Those provide reliable data for atmosphere correction of the same period in this area. Atmospheric parameters were measured by CE318. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired. Column water vapor can also be retrieved according to data in 936 nm. The dataset archived in txt files includes processed data on Mar. 7, 14 and 17 respectively.
SU Gaoli
The dataset of ground truth measurement synchronizing with the airborne imaging spectrometer (OMIS-II) mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jun. 16, 2008. Observation items included: (1) The radiative temperature by the handheld radiometer in Yingke oasis maize field (from BNU, the vertical canopy observation, the transect observation and the diagonal observation), Yingke oasis wheat field (only for the transect temperature), and Huazhaizi desert No. 2 plot (the NE-SW diagonal observation). Besides, the maize radiative temperature and the physical temperature were also measured both by the handheld radiometer and the probe thermometer in the maize plot of 30m near the resort. The data included raw data (in Word format), recorded data and the blackbody calibrated data (in Excel format). (2) Atmospheric parameters in Huazhaizi desert No. 2 plot by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (3) The radiative temperature of maize, wheat and the bare land in Yingke oasis maize field and Huazhaizi desert maize field by ThermaCAM SC2000 (1.2m above the ground, FOV = 24°×18°), The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived in Excel format). (4) The reflectance spectra by ASD through the vertical canopy observation and the transect observation in Yingke oasis maize field (350-2500nm , from BNU), and Huazhaizi desert maize field and Huazhaizi desert No. 1 plot (350-2500nm , from Cold and Arid Regions Environmental and Engineering Research Institute, CAS). The data included raw data (in .doc format), recorded data and the blackbody calibrated data (in Excel format). (5) The radiative temperature by the automatic thermometer (FOV: 10°; emissivity: 1.0), observing straight downwards at intervals of 1s in Yingke oasis maize field (one from BNU and the other from Institute of Remote Sensing Applications), Huazhaizi desert maize field (only one from BNU for continuous radiative temperature of the maize canopy) and Huazhaizi desert No. 2 plot (two for reaumuria soongorica canopy and the bare land). Raw data, blackbody calibrated data and processed data were all archived in Excel format. (6) Photosynthesis of maize and wheat of Yingke oasis maize field by LI6400, carried out according to WATER specifications. Raw data were archived in the user-defined format (by notepat.exe) and processed data were in Excel format. (7) Soil moisture in Yingke oasis maize field. The sample was fetched by the soil auger and weighed by the scales before and after drying. Data were archived in Excel format. (8) FPAR (Fraction of Photosynthetically Active Radiation) of maize and wheat by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in the table format of Word. (9) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format.
CHEN Ling, REN Huazhong, ZHOU Hongmin, CAO Yongpan, SHU Lele, WU Yueru, XU Zhen, LI Li, LIU Sihan, XIA Chuanfu, XIN Xiaozhou, ZHOU Chunyan, ZHOU Mengwei, FAN Wenjie, TAO Xin, FENG Lei, LIANG Wenguang, YU Fan, WANG Dacheng, YANG Guijun, LI Xiaoyu, Liu Liangyun
The dataset of ground truth measurement synchronizing with Landsat TM was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on May 20, 2008. Observation items included: (1) LAI in Yingke oasis maize field. The maximum leaf length and width of each alfalfa and barley were measured. Data were archived in Excel format. (2) Reflectance spectra in Yingke oasis maize field by ASD FieldSpec (350-2500nm, the vertical canopy observation and the transect observation) from Institute of Remote Sensing Applications (CAS), and in Huazhaizi desert No. 2 plot by ASD FieldSpec (350-1603nm, the vertical observation and the transect observation for reaumuria soongorica and the bare land) from Beijing Academy of Agriculture and Forestry Sciences. The grey board and the black and white cloth were also used for calibration spectrum. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (3) the radiative temperature by 3 handheld radiometers in Yingke oasis maize field (Institute of Remote Sensing Applications, BNU and Institute of Geographic Sciences and Natural Resources respectively, the vertical canopy observation and the transect observation), and by 3 handheld infrared thermometers in Huazhaizi desert No. 2 plot (the vertical vegetation and bare land observation). The data included raw data (in Word format), recorded data and the blackbody calibrated data (in Excel format). (4) the radiative temperature of maize, wheat and the bare land of Yingke oasis maize field by ThermaCAM SC2000 (1.2m above the ground, FOV = 24°×18°). The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived in Excel format). (5) Photosynthesis of maize, wheat and the bare land of Yingke oasis maize field by LI6400, carried out according to WATER specifications. Raw data were archived in the user-defined format (by notepat.exe) and processed data were in Excel format. (6) Maize albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (7) Atmospheric parameters in Huazhaizi desert No. 2 plot by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (8) Coverage fraction of Reaumuria soongorica by the self-made coverage instrument and the camera (2.5m-3.5m above the ground) in Huazhaizi desert No. 2 plot. Based on the length of the measuring tape and the bamboo pole, the size of the photo can be decided. GPS data was used for the location and the technology LAB was used to retieve the coverage fractionof the green vegetation. Besides, such related information as the surrounding environment was also recorded. Data included the vegetation iamge and coverage (by .exe). (9) The radiative temperature of Reaumuria soongorica canopy and the bare land by 2 fixed automatic thermometers (FOV: 10°; emissivity: 0.95) in Huazhaizi desert No. 2 plot, observing straight downwards at intervals of 1s. Raw data, blackbody calibrated data and processed data were all archived in Excel format.
CHAI Yuan, CHEN Ling, KANG Guoting, LI Jing, QIAN Yonggang, REN Huazhong, WANG Haoxing, WANG Jindi, XIAO Zhiqiang, YAN Guangkuo, SHU Lele, GUANG Jie, LI Li, Liu Qiang, LIU Sihan, XIN Xiaozhou, ZHANG Hao, ZHOU Chunyan, TAO Xin, YAN Binyan, YAO Yanjuan, TIAN Jing, LI Xiaoyu
The dataset of sun photometer observations was obtained in the Zhangye city foci experimental areas (38°56′8.9″N, 100°27′8.3″E, 1400m) from Mar. 30 to Apr. 2, 2008. Measurements were carried out by CE318 for 1640nm, 1020nm, 936nm, 870nm, 670nm, 550nm, 440nm, 380nm and 340nm, and column water vapor by 936 nm data on Mar. 30 and 31, Apr. 1 and 2, 2008. Accuracy of CE318 could be influenced by local air pressure, instrument calibration parameters, and convertion factors. (1) Most air pressure was derived from elevation-related empiricism, which was not reliable. For more accurate result, simultaneous data from the weather station are needed. (2) Errors from instrument calibration parameters need correcting. Thus field calibration based on Langly or interior instrument calibrationcin the standard light is required. (3) Convertion factors for retrieval of aerosol optical depth and the water vapor of the water vapor channel were also from empiricism, and need further checking. Raw data were archived in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Preprocessed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. Langley was used for the instrument calibration. Two parts are included in CE318 result data (see “Geometric Positions and the Total Optical Depth of Each Channel” and “Rayleigh Scattering and Aerosol Optical Depth of Each Channel”).
FANG Li, SU Gaoli
The dataset of ground truth measurement synchronizing with PROBA CHRIS was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jul. 1, 2008. Observation items included: (1) FPAR (Fraction of Photosynthetically Active Radiation) of maize and wheat by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in the table format of Word. (2) BRDF of maize by ASD (350～2 500 nm) from Institute of Remote Sensing Applications (CAS) and the self-made multi-angluar observation platform of BNU make in Yingke oasis maize field. The maximum height of the platform was 5m above the ground with the azimuth 0~360° and the zenith angle -60°~60°. An automatic thermometer was attached to the platform for the multiangle radiative temperature. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel. (3) The radiative temperature of the maize canopy by the automatic thermometer (emissivity: 0.95),at a hight of 50cm from the crown in Yingke oasis maize field. Raw data, blackbody calibrated data and processed data were all archived in Excel format. (4) Atmospheric parameters at the resort by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in k7 format and can be opened by ASTPWin. ReadMe.txt is attached for details. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (5) The multiangle radiative temperature by the automatic thermometer (emissivity: 1.0) attached on the observation platform, at an interval of 0.05s. The data were archived in .txt files (.dat format). The first seven lines were the header file, including acquisition date, time, and intervals; besides, Time (starting time), TObj (target temperature), Tint (the interior temperature of the probe), TBox (the temperature of the box) and Tact (the actual temperature calculated from the given emissivity) were also listed.
CHEN Ling, REN Huazhong, XIAO Yueting, SU Gaoli, WU Mingquan, WU Chaoyang, XIA Chuanfu, ZHOU Chunyan, ZHOU Mengwei, SHEN Xinyi, YANG Guijun
The dataset of ground truth measurements synchronizing with Landsat TM was obtained in the Linze grassland and Linze station foci experimental area on Sep. 23, 2007 during the pre-observation periods, and one scene was captured well. These data can provide reliable ground data for retrieval and validation of land surface temperatures with EO-1 Hyperion remote sensing approaches. Observation items included: (1) the land surface radiative temperature by the hand-held infrared thermometer, which was calibrated; (2) GPS by GARMIN GPS 76; (3) atmospheric parameters at Daman Water Management office measured by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. These data include the raw data in .k7 format and can be opened by ASTPWin software. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel contain optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (4) ground-based land surface temperature measurements by the thermal imager in the Heihe gobi, west of Zhangye city.
CHE Tao, BAI Yunjie, DING Songchuang, GAO Song, HAN Xujun, HAO Xiaohua, LI Hongyi, LI Xin, LI Zhe, LIANG Ji, PAN Xiaoduo, QIN Chun, RAN Youhua, WANG Xufeng, WU Yueru, YAN Qiaodi, ZHANG Lingmei, FANG Li, LI Hua, Liu Qiang, Wen Jianguang, MA Hongwei, YAN Yeqing, YUAN Xiaolong
The dataset of ground truth measurement synchronizing with the airborne imaging spectrometer (OMIS-II) mission was obtained in the Yingke oasis and Huazhaizi desert steppe foci experimental areas on Jun. 4, 2008. Observation items included: (1) ground object reflectance spectra of maize and wheat in Yingke oasis maize field by ASD FieldSpec (350~2500 nm, the vertical canopy observation and the transect observation) from Institute of Remote Sensing Applications (CAS); and of the black and white cloth, the water body, vegetation and the cement floor in the resort calibration site by ASD (350-2500nm, fixed points observation) from BNU. Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (2) The radiative temperature in Yingke oasis maize field (the transect observation), Yingke oasis wheat field (the transect observation), the maize field (intensive) near the resort (the transect observation) and Huazhaizi desert No. 1 plot (the diagonal and the fixed point observation) by the handheld infrared thermometer (emissivity: 1.00). As for the fixed point observation, 25 corner points were chosen in the plot of 30m×30m, and at each point, the bare land was measured twice and the vegetation once. Raw data (in Word format), blackbody calibrated data and processed data (in Excel format) were all archived. (3) Atmospheric parameters on the ICBC resort office roof by CE318 (produced by CIMEL in France) from Institute of Remote Sensing Applications. The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1640nm, 1020nm, 936nm, 870nm, 670nm, 550nm, 440nm, 380nm and 340nm were all acquired by CE318. Those data include the raw data in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (4) Photosynthesis of wheat and maize by LI6400 in Yingke oasis maize field, carried out according to WATER specifications. Raw data were archived in the user-defined format (by notepat.exe) and processed data were in Excel format. (5) the radiative temperature vegetation (Reaumuria soongorica) and the bare land in Huazhaizi desert No. 1 plot by ThermaCAM SC2000 ( (1.2m above the ground, FOV = 24°×18°),. The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived in Excel format). (6) the radiative temperature by the automatic thermometer at nadir in Yingke oasis maize field (2 from BNU, FOV: 10°; emissivity: 0.95, at intervals of 1s, set above the maize canopy and the bare land between ridges and the third from Institute of Remote Sensing Applications, emissivity: 1.0, at intervals of 0.05s, set above the maize canopy), Yingke wheat field (one set above the wheat canopy), Huazhaizi desert No. 1 plot (one set above the barley canopy), and in the resort calibration site (one for the cement floor). Raw data, blackbody calibrated data and processed data were all archived in Excel format. (7) Wheat albedo by the shortwave radiometer in Yingke oasis maize field. R =10H (R for FOV radius; H for the probe height). Data were archived in Excel format. (8) Wheat FPAR (Fraction of Photosynthetically Active Radiation) by SUNSACN and the digital camera in Yingke oasis maize field. FPAR= (canopyPAR－surface transmissionPAR－canopy reflection PAR+surface reflectionPAR) /canopy PAR; APAR=FPAR* canopy PAR. Data were archived in the table format of Word. (9) LAI in Yingke oasis maize field. The maximum leaf length and width of each maize and wheat were measured. Data were from Jun. 6, 2008, archived in Excel format.
CHEN Ling, REN Huazhong, ZHOU Hongmin, CAO Yongpan, SHU Lele, WU Yueru, XU Zhen, LI Li, LIU Sihan, XIA Chuanfu, XIN Xiaozhou, ZHOU Chunyan, ZHOU Mengwei, FAN Wenjie, TAO Xin, FENG Lei, LIANG Wenguang, YU Fan, WANG Dacheng, YANG Guijun, LI Xiaoyu, Liu Liangyun
The dataset of ground truth measurement synchronizing with Envisat ASAR was obtained in the arid region hydrological experimental area on Sep. 19, 2007 during the pre-observation period. One scene of Envisat ASAR image was captured on Sep. 19. The data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:29 BJT. Those provide reliable ground data for remote sensing retrieval and validation of soil moisture from Envisat ASAR image. Observation items included: (1) soil moisture measured by the cutting ring method in Linze reed land, Zhangye farmland, Zhangye gobi, Linze maize land, Linze alfalfa land, Zhangye weather station, and Linze wetland. (2) GPS measured by GARMIN GPS 76 (3) vegetation measurements including the vegetation height, the green weight, the dry weight, the sampling method, and descriptions on the land type, uniformity and dry and wet conditions (4) atmospheric parameters at Daman Water Management office measured by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 and can be opened by ASTPWin. ReadMetext files (.txt) is attached for detail. Processed data (after retrieval of the raw data) archived as Excel files are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. (5) roughness measured by the roughness plate together with the digital camera. The coordinates of the sample would be got with the help of ArcView; and after geometric correction, surface height standard deviation (cm) and correlation length (cm) could be acquired based on the formula listed on pages 234-236, Microwave Remote Sensing (Vol. II). The roughness data were initialized by the sample name, which was followed by the serial number, the name of the file, standard deviation and correlation length. Each text files (.txt) file is matched with one sample photo and standard deviation and correlation length represent the roughness. In addition, the length of 101 radius is also included for further checking.
CHE Tao, LI Xin, BAI Yunjie, DING Songchuang, GAO Song, HAN Xujun, HAO Xiaohua, LI Hongyi, LI Zhe, LIANG Ji, PAN Xiaoduo, QIN Chun, RAN Youhua, WANG Xufeng, WU Yueru, YAN Qiaodi, ZHANG Lingmei, FANG Li, LI Hua, Liu Qiang, Wen Jianguang, MA Hongwei, YAN Yeqing, YUAN Xiaolong
The dataset of sun photometer observations was obtained in the Binggou watershed foci experimental areas (N38°04′1.4″/E100°13′15.6″, 3414.41m) from Mar. 15 to Apr. 2, 2008 (to be specific, the daytime of 15-03-2008, 16-03-2008, 17-03-2008, 18-03-2008, 19-03-2008, 21-03-2008, 22-03-2008, 23-03-2008, 24-03-2008, 25-03-2008, 26-03-2008 and 27-03-2008). Those provide reliable data for retrieval of optical depth, Rayleigh scattering, aerosol optical depth, column water vapor (through data in 936 nm) and with various parameters in 550nm, the horizontal visibility can be further developed by MODTRAN or 6S. The optical depth in 1640nm, 1020nm, 936nm, 870nm, 670nm, 550nm, 440nm, 380nm and 340nm were all acquired. Those data include the raw data in .k7 and can be opened by ASTPWin. ReadMe.txt is attached for detail. Processed data (after retrieval of the raw data) in Excel format are on optical depth, Rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. Accuracy of CE318 could be influenced by local air pressure, instrument calibration parameters, and convertion factors. (1) Most air pressure was derived from elevation-related empirical method, which was not reliable. For more accurate result, simultaneous data from the weather station are needed. (2) Errors in instrument calibration parameters need correcting. Thus field calibration based on Langly or interior instrument calibration in the standard light is required. (3) Convertion factors for retrieval of aerosol optical depth and the water vapor of the water vapor channel were also from the empirical method, and need further validation. Raw data were archived in .k7 format and can be opened by ASTPWin. ReadMe.txt is attached for detail. Preprocessed data (after retrieval of the raw data) in Excel format are on optical depth, Rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number. Langley was used for the instrument calibration. Two subfolders including raw data and processed data (Geometric Positions and the Total Optical Depth of Each Channel and Rayleigh Scattering and Aerosol Optical Depth of Each Channel), and three data files (Directions on Data Observations, Raw Data and Proprocessed Data) were archived.
FANG Li, SU Gaoli, LIU Qinhuo
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS
0931-4967287
poles@itpcas.ac.cn
Links
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved
｜ 
No.11010502040845
Tech Support: westdc.cn
