Current Browsing: 2008-07-04


WATER: Dataset of airborne microwave radiometers (L&K bands) mission in the Biandukou-Linze flight zone on Jul. 4, 2008

This data set was acquired by L & K band airborne microwave radiometer on July 4, 2008, in the Biandukou-Linze flight zone. The frequency of L-band is 1.4GHz, and the backsight is 35 degrees to obtain dual polarization (H and V) information; the frequency of K-band is 18.7ghz, and there is no polarization information. The plane took off from Zhangye airport at 9:48 (Beijing time, the same below) and landed at 14:14. 10: At 16-11:40, the flight altitude was 3100-3500m and the flight speed was about 230-250km / hr. 12: 16-12:18 low flying Linze reservoir line 1-6, relative altitude 100m, flight speed 190km / hr. 12: At 26-13:42, he worked in Linze photography area, with a flight altitude of about 2000m and a flight speed of about 250km / hr. 13: 49-13:51 fly low again to Linze reservoir line 1-6. The original data is divided into two parts: microwave radiometer data and GPS data. The L and K bands of microwave radiometer are non imaging observations. The digital values obtained from the instantaneous observation are recorded in the text file, and the longitude and latitude as well as the aircraft attitude parameters are recorded in the GPS data. When using microwave radiometer to observe data, it is necessary to convert the digital value recorded into the bright temperature value according to the calibration coefficient (the calibration coefficient file is filed with the original observation data). At the same time, through the clock records of microwave radiometer and GPS, we can connect the microwave observation with GPS record and match the geographic coordinate information for the microwave observation. Due to the coarse observation resolution of microwave radiometer, the effects of aircraft yaw, roll and pitch are generally ignored in data processing. According to the target and flight relative altitude (H), after calibration and coordinate matching, the observation information can also be gridded. The resolution (x) of L band and K band is consistent with that of observation footprint. The reference resolution is: L band, x = 0.3H; K band, x = 0.24h. After the above steps, we can get the products that users can use directly.

2020-03-09

WATER: Dataset of soil moisture observations in the Linze station foci experimental area from May to Jun, 2008

The dataset of soil moisture observations was obtained by the cutting ring (50cm^3) and ML2X Soil Moisture Tachometer in the Linze station foci experimental area. Surface soil (0-5cm) was measured 2-3 times in 40 subplots of the west-east desert strip on May 24, 25, 28, Jun. 27 and Jul. 11, 2008, 2-4 times in 9 subplots of north-south strip on May 24, 25, 28, Jun. 27 and Jul. 11, 17 times from P1 to P6 strips on Jul. 4 and 8, nine times along LY06 strip on Jun. 6, 15, 29 and Jul. 11, LY07 strip on May 30, Jun. 6, 10, 15, 29 and Jul. 11 and LY08 strip on May 30, Jun. 6 and 10, and once by the cutting ring and three times by ML2X Soil Moisture Tachometer in Wulidun farmland quadrates on May 24, 25, 28, Jun. 29 and Jul. 11. Data were archived as Excel files. See the metadata record “WATER: Dataset of setting of the sampling plots and stripes in the Linze station foci experimental area” for more information of the quadrate locations.

2019-09-15